mirrors
/
Tasmota
mirror of https://github.com/arendst/Tasmota.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
Tasmota/RELEASENOTES.md

170 lines
11 KiB
Markdown
Raw Blame History

## Migration Information
See [wiki migration path](https://github.com/arendst/Sonoff-Tasmota/wiki/Upgrade#migration-path) for instructions how to migrate to a major version. Pay attention to the following version breaks due to dynamic settings updates:
1. Migrate to **Sonoff-Tasmota 3.9.x**
2. Migrate to **Sonoff-Tasmota 4.x**
3. Migrate to **Sonoff-Tasmota 5.14**
4. Migrate to **Sonoff-Tasmota 6.x**
## Release notes
### Change in default initial configuration tool
Firmware binary **sonoff-classic.bin** supports **WifiManager, Wps and SmartConfig** for initial configuration. The default tool is **Wps**.
To save memory space all other binaries support **WifiManager only**.
See _changelog.ino how to enable them again.
- Define WIFI_CONFIG_TOOL now contains the default behaviour once a SSID has been configured.
- If no SSID is configured making a wifi connection impossible the new define WIFI_CONFIG_NO_SSID will be used.
- While define WIFI_CONFIG_NO_SSID is set to WIFI_WPSCONFIG in user_config.h the compiler will check for define USE_WPS and if not enabled WIFI_CONFIG_NO_SSID will default to WIFI_MANAGER using the webserver. If define USE_WEBSERVER is also not enabled WIFI_CONFIG_NO_SSID will default to WIFI_SMARTCONFIG. If define USE_SMARTCONFIG is also not enabled WIFI_CONFIG_NO_SSID will default to a new option WIFI_SERIAL allowing to enter wifi parameters to serial which is always possible.
## Provided Binary Downloads
The following binary downloads have been compiled with ESP8266/Arduino library version **2.3.0**
- **sonoff-minimal.bin** = The Minimal version allows intermediate OTA uploads to support larger versions and does NOT change any persistent parameter. This version **should NOT be used for initial installation**.
- **sonoff-classic.bin** = The Classic version allows **initial installation** using either WifiManager, Wps or SmartConfig.
- **sonoff.bin** = The Sonoff version without Wps and SmartConfig configuration but adds more sensors.
- **sonoff-BG.bin** to **sonoff-TW.bin** = The Sonoff version without Wps and SmartConfig configuration in different languages.
- **sonoff-sensors.bin** = The Sensors version without Wps and SmartConfig configuration but adds even more useful sensors.
- **sonoff-knx.bin** = The Knx version without Wps and SmartConfig configuration and some other features but adds KNX support.
See [Tasmota ESP/Arduino library version related issues](https://github.com/arendst/Sonoff-Tasmota/wiki/Theo's-Tasmota-Tips#20180523---relation-tasmota-and-esp8266arduino-core-version) why these files are still released using ESP/Arduino library version v2.3.0.
### Available Features and Sensors
| Feature or Sensor | minimal | classic | sonoff | knx | sensors | Remarks
|--------------------------------|---------|---------|--------|------|---------|--------
| ESP/Arduino lib v2.3.0 | 340k | 477k | 473k | 492k | 497k |
| ESP/Arduino lib v2.4.2 | 360k | 491k | 491k | 509k | 513k | No sleep
| | | | | | |
| MY_LANGUAGE en-GB | x | x | x | x | x |
| USE_WPS | - | x | - | - | - | WPS
| USE_SMARTCONFIG | - | x | - | - | - | SmartConfig
| USE_ARDUINO_OTA | - | - | - | - | - |
| MQTT_LIBRARY_TYPE PUBSUBCLIENT | x | x | x | x | x |
| USE_DOMOTICZ | - | x | x | x | x |
| USE_HOME_ASSISTANT | - | x | x | x | x |
| USE_MQTT_TLS | - | - | - | - | - |
| USE_KNX | - | - | - | x | - |
| USE_WEBSERVER | x | x | x | x | x | WifiManager
| USE_EMULATION | - | x | x | - | x |
| USE_DISCOVERY | - | x | x | x | x |
| WEBSERVER_ADVERTISE | - | x | x | x | x |
| MQTT_HOST_DISCOVERY | - | x | x | x | x |
| USE_TIMERS | - | - | x | x | x |
| USE_TIMERS_WEB | - | - | x | x | x |
| USE_SUNRISE | - | - | x | x | x |
| USE_RULES | - | - | x | x | x |
| | | | | | |
| USE_ADC_VCC | x | x | x | x | x |
| USE_DS18B20 | - | - | - | - | - | Single sensor
| USE_DS18x20 | - | x | x | x | x | Multiple sensors
| USE_DS18x20_LEGACY | - | - | - | - | - | Multiple sensors
| | | | | | |
| Feature or Sensor | minimal | classic | sonoff | knx | sensors |
| USE_I2C | - | - | x | x | x |
| USE_SHT | - | - | x | x | x |
| USE_HTU | - | - | x | x | x |
| USE_BMP | - | - | x | x | x |
| USE_BME680 | - | - | - | - | x |
| USE_BH1750 | - | - | x | x | x |
| USE_VEML6070 | - | - | - | - | x |
| USE_ADS1115 | - | - | - | - | x |
| USE_ADS1115_I2CDEV | - | - | - | - | - |
| USE_INA219 | - | - | - | - | x |
| USE_SHT3X | - | - | x | x | x |
| USE_TSL2561 | - | - | - | - | x |
| USE_MGS | - | - | - | - | x |
| USE_SGP30 | - | - | x | x | x |
| USE_SI1145 | - | - | - | - | x |
| USE_LM75AD | - | - | x | x | x |
| USE_APDS9960 | - | - | - | - | - |
| USE_MCP230xx | - | - | - | - | - |
| USE_MPR121 | - | - | - | - | - |
| USE_CCS811 | - | - | - | - | - |
| USE_MPU6050 | - | - | - | - | - |
| | | | | | |
| Feature or Sensor | minimal | classic | sonoff | knx | sensors |
| USE_SPI | - | - | - | - | - |
| USE_MHZ19 | - | - | x | x | x |
| USE_SENSEAIR | - | - | x | x | x |
| USE_PMS5003 | - | - | x | x | x |
| USE_NOVA_SDS | - | - | x | x | x |
| USE_PZEM004T | - | - | x | x | x |
| USE_SERIAL_BRIDGE | - | - | x | x | x |
| USE_SDM120 | - | - | - | - | x |
| USE_SDM630 | - | - | - | - | x |
| USE_IR_REMOTE | - | - | x | x | x |
| USE_IR_HVAC | - | - | - | - | x |
| USE_IR_RECEIVE | - | - | x | x | x |
| USE_WS2812 | - | x | x | x | x |
| USE_WS2812_DMA | - | - | - | - | - |
| USE_ARILUX_RF | - | - | x | x | x |
| USE_SR04 | - | - | x | x | x |
| USE_TM1638 | - | - | - | - | - |
| USE_RF_FLASH | - | - | x | x | x |
## Changelog
Version 6.2.0 20180901
* Allow user override of define MAX_RULE_VARS and MAX_RULE_TIMERS (#3561)
* Disable wifi sleep for both Esp8266/Arduino core 2.4.1 and 2.4.2 to solve device freeze caused by Espressif SDK bug (#3554)
* Change DS18B20 driver to provide better instant results
* Change some sensor drivers to provide instant results
* Change define USE_ALL_SENSORS to USE_SENSORS as it doesn't contain all sensors due to duplicate I2C addresses
* Change some sensor update timings: AdcEvery 200 -> 250, Senseair 300 -> 250, SDM120 300 -> 250, SDM630 300 -> 250
* Change default Wifi config option from WPS to Wifi Manager if WPS is disabled or Wifi Smartconfig if webserver is disabled or Wifi Serial input if Smartconfig is disabled
* Change SHT1x driver to provide better instant results and fix I2C interference
* Change DHT driver to provide better instant results and add decimals to DHT11 (#3164)
* Change DS18x20 driver to provide better instant results (#3169)
* Change CounterType 1 from milliseconds to microseconds (#3437)
* Change scheduler for better sleep support using Uptime, Delay, PulseTime and TelePeriod, Blinktime (#3581)
* Remove unused functionality from Sonoff-minimal to save space
* Remove WPS and SmartConfig from sonoff-minimal saving 56k code space
* Remove TSL2561 debug message and update library (#2415)
* Remove forced restart when sleep command is executed (#3554)
* Fix invalid response using more than 4 switches and domoticz
* Fix sonoff-minimal not using default settings
* Fix unsecure main webpage update
* Fix DHT driver mixing values for different sensors (#1797)
* Fix EnergyReset3 regression not clearing total energy (#2723)
* Fix rules once regression from v6.1.0 (#3198, #3226)
* Fix command Scale buffer overflow (#3236)
* Fix possible WDT due to long MQTT publish handling (#3313)
* Fix command TimeDst/TimeStd invalid JSON (#3322)
* Fix handling of default names when using names starting with shortcut character ",0,1 or 2 (#3392, #3600, #3618)
* Fix LM75AD I2C sensor detection (#3408)
* Fix iFan02 power on state (#3412, #3530)
* Fix some Pow R2 and S31 checksum errors using optimized re-sync (#3425)
* Fix SDM120 reporting wrong negative values to Domoticz (#3521)
* Fix MQTT reconnection detection when using TasmotaMqtt library (#3558)
* Fix OtaMagic when file path contains a dash (-) (#3563)
* Fix Sonoff Bridge data reception when using Portisch EFM8 firmware using in data buffer length (#3605)
* Add read sensor retry to DS18B20, DS18x20, DHT, SHT1X and HTU21
* Add user selection of Wifi Smartconfig as define USE_SMARTCONFIG in user_config.h
* Add wifi and mqtt status led blinkyblinky to be disabled by SetOption31 1. Does not work when LedPower is On (deliberate) (#871, #2230, #3114, #3155)
* Add support for TM1638 switch (#2226)
* Add GPIO options ButtonXn, SwitchXn and CounterXn to select INPUT mode instead of INPUT_PULLUP (#2525)
* Add support for APDS9960 proximity sensor (#3051)
* Add support for MPR121 controller in input mode for touch buttons (#3142)
* Add support for MCP230xx for general purpose input expansion and command Sensor29 (#3188)
* Add default Wifi Configuration tool as define WIFI_CONFIG_NO_SSID in user_config.h if no SSID is configured (#3224)
* Add command Timers 0/1 to globally disable or enable armed timers (#3270)
* Add support for CCS811 sensor (#3309)
* Add Turkish language file (#3332)
* Add command SerialSend4 to send binary serial data (#3345)
* Add initial support for sensor MPU6050 (#3352)
* Add rule triggers Wifi#Connected and Wifi#Disconnected (#3359)
* Add option + to command Rule to concatenate new rule with existing rules (#3365)
* Add message when JavaScript is not enabled in webbrowser (#3388)
* Add build time setting of ButtonTopic and SwitchTopic (#3414)
* Add iFan02 Fanspeed + and Fanspeed - command options (#3415)
* Add Individual HSBColorX commands (#3430, #3615)
* Add output support on MCP23008/MCP23017 (#3436)
* Add modulo option to rules like rule1 on Time#Minute|5 do backlog power on;delay 200;power off endon (#3466)
* Add RGB support for Domoticz (#3547)
* Add all ruletimer values to command RuleTimer result message (#3571)
* Add command Publish2 for publishing retained MQTT messages (#3593)
* Add commands ButtonDebounce 40..1000 and SwitchDebounce 40..1000 to have user control over debounce timing. Default is 50mS (#3594)
* Add RuleX debug options 8,9,10 (StopOnError) to control RuleX execution status after an exception restart (#3607)
* Add rule variables %sunrise%, %sunset%, %uptime% and %time% (#3608)
* Add optional MQTT_TELE_RETAIN to Energy Margins message (#3612, 3614)
Reference in New Issue View Git Blame Copy Permalink