This information is super helpful when debugging and it'd be nice to not
have to scroll around in the logs to find it near a bugreport.
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Most visible when using tsnet.Server, but could have resulted in dropped
messages in a few other places too.
Fixes#5743
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
Sync with golang.org/x/sync/singleflight at commit
8fcdb60fdcc0539c5e357b2308249e4e752147f1
Fixes#5790
Signed-off-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Callers of LogHost often jump through hoops to undo the
loss of information dropped by LogHost (e.g., the HTTP scheme).
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
I brain-o'ed the math earlier. The NextDNS prefix is /32 (actually
/33, but will guarantee last bit is 0), so we have 128-32 = 96 bits
(12 bytes) of config/profile ID that we can extract. NextDNS doesn't
currently use all those, but might.
Updates #2452
Change-Id: I249bd28500c781e45425fd00fd3f46893ae226a2
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Context: https://github.com/tailscale/tailscale/pull/5588#issuecomment-1260655929
It seems that if the interface at index 1 is down, the rule is not installed. As such,
we increase the range we detect up to 2004 in the hope that at least one of the interfaces
1-4 will be up.
Signed-off-by: Tom DNetto <tom@tailscale.com>
I added new functions to winutil to obtain the state of a service and all
its depedencies, serialize them to JSON, and write them to a Logf.
When tstun.New returns a wrapped ERROR_DEVICE_NOT_AVAILABLE, we know that wintun
installation failed. We then log the service graph rooted at "NetSetupSvc".
We are interested in that specific service because network devices will not
install if that service is not running.
Updates https://github.com/tailscale/tailscale/issues/5531
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
Control may not be bound to (just) localhost when sharing dev servers,
allow the Wasm client to connect to it in that case too.
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
* and move goroutine scrubbing code to its own package for reuse
* bump capver to 45
Change-Id: I9b4dfa5af44d2ecada6cc044cd1b5674ee427575
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
SetDNS calls were broken by 6d04184325 the other day. Unreleased.
Caught by tests in another repo.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
At some point we started restarting map polls on health change, but we
don't remember why. Maybe it was a desperate workaround for something.
I'm not sure it ever worked.
Rather than have a haunted graveyard, remove it.
In its place, though, and somewhat as a safety backup, send those
updates over the HTTP/2 noise channel if we have one open. Then if
there was a reason that a map poll restart would help we could do it
server-side. But mostly we can gather error stats and show
machine-level health info for debugging.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
In prep for a future change that would've been very copy/paste-y.
And because the set-dns call doesn't currently use a context,
so timeouts/cancelations are plumbed.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
- removed some in-flow time calls
- increase buffer size to 2MB to overcome syscall cost
- move relative time computation from record to report time
Signed-off-by: James Tucker <james@tailscale.com>
The fragment offset is an 8 byte offset rather than a byte offset, so
the short packet limit is now in fragment block size in order to compare
with the offset value.
The packet flags are in the first 3 bits of the flags/frags byte, and
so after conversion to a uint16 little endian value they are at the
start, not the end of the value - the mask for extracting "more
fragments" is adjusted to match this byte.
Extremely short fragments less than 80 bytes are dropped, but fragments
over 80 bytes are now accepted.
Fixes#5727
Signed-off-by: James Tucker <james@tailscale.com>
* tailcfg, control/controlhttp, control/controlclient: add ControlDialPlan field
This field allows the control server to provide explicit information
about how to connect to it; useful if the client's link status can
change after the initial connection, or if the DNS settings pushed by
the control server break future connections.
Change-Id: I720afe6289ec27d40a41b3dcb310ec45bd7e5f3e
Signed-off-by: Andrew Dunham <andrew@tailscale.com>
We're adding two log IDs to facilitate data-plane audit logging: a node-specific
log ID, and a domain-specific log ID.
Updated util/deephash/deephash_test.go with revised expectations for tailcfg.Node.
Updates https://github.com/tailscale/corp/issues/6991
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
This fixes a race condition which caused `c.muCond.Broadcast()` to
never fire in the `firstDerp` if block. It resulted in `Close()`
hanging forever.
Signed-off-by: Kyle Carberry <kyle@carberry.com>
Personal preference (so it's obvious it's not a bool flag), but it
also matches the --state= before it.
Bonus: stop allowing PORT to sneak in extra flags to be passed as
their own arguments, as $FOO and ${FOO} expand differently. (${FOO} is
required to concat to strings)
Change-Id: I994626a5663fe0948116b46a971e5eb2c4023216
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
As the comment in the code says, netstack should always respond to ICMP
echo requests to a 4via6 address, even if the netstack instance isn't
normally processing subnet traffic.
Follow-up to #5709
Change-Id: I504d0776c5824071b2a2e0e687bc33e24f6c4746
Signed-off-by: Andrew Dunham <andrew@tailscale.com>
It was checking if the sshServer was initialized as a proxy, but that
could either not have been initialized yet or Tailscale SSH could have
been disabled after intialized.
Also bump tailcfg.CurrentCapabilityVersion
Signed-off-by: Maisem Ali <maisem@tailscale.com>
We were just logging them to the console, which is useful for debugging,
but we may want to show them in the UI too.
Updates tailscale/corp#6939
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
This doesn't change any behaviour for now, other than maybe running a
full netcheck more often. The intent is to start gathering data on
captive portals, and additionally, seeing this in the 'tailscale
netcheck' command should provide a bit of additional information to
users.
Updates #1634
Change-Id: I6ba08f9c584dc0200619fa97f9fde1a319f25c76
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
d5e7e309 changed the `hostinfo.GetVersion` from distro and distro version
to UTS Name Release and moved distribution information under
`hostinfo.Distro*`.
`tailscale configure-host` command implementation for Synology DSM
environments relies on the old semantics of this string for matching DSM
Major version so it's been broken for a few days.
Pull in `hostinfo` and prefix match `hostinfo.DistroVersion` to match
DSM major version.
Signed-off-by: Berk D. Demir <bdd@mindcast.org>
5 seconds may not be enough if we're still loading the derp map and
connecting to a slow machine.
Updates #5693
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
License Updater
Andrew Dunham
Maisem Ali
Mihai Parparita
Cuong Manh Le
Josh Soref
Joe Tsai
Brad Fitzpatrick
Adrian Dewhurst
Tom DNetto
Aaron Klotz
Emmanuel T Odeke
Will Norris
James Tucker
Kyle Carberry
Anton Schubert
hlts2
Will Norris
Berk D. Demir