Tasmota/sonoff/xdrv_03_energy.ino

/*
  xdrv_03_energy.ino - Energy sensor support for Sonoff-Tasmota

  Copyright (C) 2019  Theo Arends

  This program is free software: you can redistribute it and/or modify
  it under the terms of the GNU General Public License as published by
  the Free Software Foundation, either version 3 of the License, or
  (at your option) any later version.

  This program is distributed in the hope that it will be useful,
  but WITHOUT ANY WARRANTY; without even the implied warranty of
  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  GNU General Public License for more details.

  You should have received a copy of the GNU General Public License
  along with this program.  If not, see <http://www.gnu.org/licenses/>.
*/

#ifdef USE_ENERGY_SENSOR
/*********************************************************************************************\
 * Energy
\*********************************************************************************************/

#define XDRV_03              3
#define XSNS_03              3

//#define USE_ENERGY_MARGIN_DETECTION
//  #define USE_ENERGY_POWER_LIMIT

#define ENERGY_NONE          0
#define ENERGY_WATCHDOG      4        // Allow up to 4 seconds before deciding no valid data present

#include <Ticker.h>

#define D_CMND_POWERCAL "PowerCal"
#define D_CMND_VOLTAGECAL "VoltageCal"
#define D_CMND_CURRENTCAL "CurrentCal"

enum EnergyCommands {
  CMND_POWERCAL, CMND_VOLTAGECAL, CMND_CURRENTCAL,
  CMND_POWERSET, CMND_VOLTAGESET, CMND_CURRENTSET, CMND_FREQUENCYSET };

const char kEnergyCommands[] PROGMEM =
  D_CMND_POWERCAL "|" D_CMND_VOLTAGECAL "|" D_CMND_CURRENTCAL "|"
  D_CMND_POWERSET "|" D_CMND_VOLTAGESET "|" D_CMND_CURRENTSET "|" D_CMND_FREQUENCYSET "|"
#ifdef USE_ENERGY_MARGIN_DETECTION
  D_CMND_POWERDELTA "|" D_CMND_POWERLOW "|" D_CMND_POWERHIGH "|" D_CMND_VOLTAGELOW "|" D_CMND_VOLTAGEHIGH "|" D_CMND_CURRENTLOW "|" D_CMND_CURRENTHIGH "|"
#ifdef USE_ENERGY_POWER_LIMIT
  D_CMND_MAXENERGY "|" D_CMND_MAXENERGYSTART "|"
  D_CMND_MAXPOWER "|" D_CMND_MAXPOWERHOLD "|" D_CMND_MAXPOWERWINDOW "|"
  D_CMND_SAFEPOWER "|" D_CMND_SAFEPOWERHOLD "|"  D_CMND_SAFEPOWERWINDOW "|"
#endif  // USE_ENERGY_POWER_LIMIT
#endif  // USE_ENERGY_MARGIN_DETECTION
  D_CMND_ENERGYRESET ;

void (* const EnergyCommand[])(void) PROGMEM = {
  &CmndPowerCal, &CmndVoltageCal, &CmndCurrentCal,
  &CmndPowerSet, &CmndVoltageSet, &CmndCurrentSet, &CmndFrequencySet,
#ifdef USE_ENERGY_MARGIN_DETECTION
  &CmndPowerDelta, &CmndPowerLow, &CmndPowerHigh, &CmndVoltageLow, &CmndVoltageHigh, &CmndCurrentLow, &CmndCurrentHigh,
#ifdef USE_ENERGY_POWER_LIMIT
  &CmndMaxEnergy, &CmndMaxEnergyStart,
  &CmndMaxPower, &CmndMaxPowerHold, &CmndMaxPowerWindow,
  &CmndSafePower, &CmndSafePowerHold, &CmndSafePowerWindow,
#endif  // USE_ENERGY_POWER_LIMIT
#endif  // USE_ENERGY_MARGIN_DETECTION
  &CmndEnergyReset };

float energy_voltage = 0;           // 123.1 V
float energy_current = 0;           // 123.123 A
float energy_active_power = 0;      // 123.1 W
float energy_apparent_power = NAN;  // 123.1 VA
float energy_reactive_power = NAN;  // 123.1 VAr
float energy_power_factor = NAN;    // 0.12
float energy_frequency = NAN;       // 123.1 Hz
float energy_start = 0;             // 12345.12345 kWh total previous

float energy_daily = 0;             // 123.123 kWh
float energy_total = 0;             // 12345.12345 kWh
unsigned long energy_kWhtoday_delta = 0;  // 1212312345 Wh 10^-5 (deca micro Watt hours) - Overflows to energy_kWhtoday (HLW and CSE only)
unsigned long energy_kWhtoday;      // 12312312 Wh * 10^-2 (deca milli Watt hours) - 5764 = 0.05764 kWh = 0.058 kWh = energy_daily
unsigned long energy_period = 0;    // 12312312 Wh * 10^-2 (deca milli Watt hours) - 5764 = 0.05764 kWh = 0.058 kWh = energy_daily

uint8_t energy_command_code = 0;
uint8_t energy_data_valid = 0;

bool energy_voltage_available = true;  // Enable if voltage is measured
bool energy_current_available = true;  // Enable if current is measured

bool energy_type_dc = false;
bool energy_power_on = true;

#ifdef USE_ENERGY_MARGIN_DETECTION
float energy_power_last[3] = { 0 };
uint8_t energy_power_delta = 0;
bool energy_min_power_flag = false;
bool energy_max_power_flag = false;
bool energy_min_voltage_flag = false;
bool energy_max_voltage_flag = false;
bool energy_min_current_flag = false;
bool energy_max_current_flag = false;
uint8_t energy_power_steady_cntr = 8;  // Allow for power on stabilization

#ifdef USE_ENERGY_POWER_LIMIT
uint16_t energy_mplh_counter = 0;
uint16_t energy_mplw_counter = 0;
uint8_t energy_mplr_counter = 0;
uint8_t energy_max_energy_state = 0;
#endif  // USE_ENERGY_POWER_LIMIT
#endif  // USE_ENERGY_MARGIN_DETECTION

uint8_t energy_fifth_second = 0;
Ticker ticker_energy;

/********************************************************************************************/

void EnergyUpdateToday(void)
{
  if (energy_kWhtoday_delta > 1000) {
    unsigned long delta = energy_kWhtoday_delta / 1000;
    energy_kWhtoday_delta -= (delta * 1000);
    energy_kWhtoday += delta;
  }
  RtcSettings.energy_kWhtoday = energy_kWhtoday;
  energy_daily = (float)energy_kWhtoday / 100000;
  energy_total = (float)(RtcSettings.energy_kWhtotal + energy_kWhtoday) / 100000;
}

/*********************************************************************************************/

void Energy200ms(void)
{
  energy_power_on = (power != 0) | Settings.flag.no_power_on_check;

  energy_fifth_second++;
  if (5 == energy_fifth_second) {
    energy_fifth_second = 0;

    XnrgCall(FUNC_ENERGY_EVERY_SECOND);

    if (RtcTime.valid) {
      if (LocalTime() == Midnight()) {
        Settings.energy_kWhyesterday = energy_kWhtoday;
        Settings.energy_kWhtotal += energy_kWhtoday;
        RtcSettings.energy_kWhtotal = Settings.energy_kWhtotal;
        energy_kWhtoday = 0;
        energy_kWhtoday_delta = 0;
        energy_period = energy_kWhtoday;
        EnergyUpdateToday();
#if defined(USE_ENERGY_MARGIN_DETECTION) && defined(USE_ENERGY_POWER_LIMIT)
        energy_max_energy_state = 3;
#endif  // USE_ENERGY_POWER_LIMIT
      }
#if defined(USE_ENERGY_MARGIN_DETECTION) && defined(USE_ENERGY_POWER_LIMIT)
      if ((RtcTime.hour == Settings.energy_max_energy_start) && (3 == energy_max_energy_state)) {
        energy_max_energy_state = 0;
      }
#endif  // USE_ENERGY_POWER_LIMIT

    }
  }

  XnrgCall(FUNC_EVERY_200_MSECOND);
}

void EnergySaveState(void)
{
  Settings.energy_kWhdoy = (RtcTime.valid) ? RtcTime.day_of_year : 0;
  Settings.energy_kWhtoday = energy_kWhtoday;
  RtcSettings.energy_kWhtoday = energy_kWhtoday;
  Settings.energy_kWhtotal = RtcSettings.energy_kWhtotal;
}

#ifdef USE_ENERGY_MARGIN_DETECTION
bool EnergyMargin(bool type, uint16_t margin, uint16_t value, bool &flag, bool &save_flag)
{
  bool change;

  if (!margin) return false;
  change = save_flag;
  if (type) {
    flag = (value > margin);
  } else {
    flag = (value < margin);
  }
  save_flag = flag;
  return (change != save_flag);
}

void EnergyMarginCheck(void)
{
  uint16_t energy_daily_u = 0;
  uint16_t energy_power_u = 0;
  uint16_t energy_voltage_u = 0;
  uint16_t energy_current_u = 0;
  bool flag;
  bool jsonflg;

  if (energy_power_steady_cntr) {
    energy_power_steady_cntr--;
    return;
  }

  if (Settings.energy_power_delta) {
    float delta = abs(energy_power_last[0] - energy_active_power);
    // Any delta compared to minimal delta
    float min_power = (energy_power_last[0] > energy_active_power) ? energy_active_power : energy_power_last[0];
    if (((delta / min_power) * 100) > Settings.energy_power_delta) {
      energy_power_delta = 1;
      energy_power_last[1] = energy_active_power;  // We only want one report so reset history
      energy_power_last[2] = energy_active_power;
    }
  }
  energy_power_last[0] = energy_power_last[1];  // Shift in history every second allowing power changes to settle for up to three seconds
  energy_power_last[1] = energy_power_last[2];
  energy_power_last[2] = energy_active_power;

  if (energy_power_on && (Settings.energy_min_power || Settings.energy_max_power || Settings.energy_min_voltage || Settings.energy_max_voltage || Settings.energy_min_current || Settings.energy_max_current)) {
    energy_power_u = (uint16_t)(energy_active_power);
    energy_voltage_u = (uint16_t)(energy_voltage);
    energy_current_u = (uint16_t)(energy_current * 1000);

//    AddLog_P2(LOG_LEVEL_DEBUG, PSTR("NRG: W %d, U %d, I %d"), energy_power_u, energy_voltage_u, energy_current_u);

    Response_P(PSTR("{"));
    jsonflg = false;
    if (EnergyMargin(false, Settings.energy_min_power, energy_power_u, flag, energy_min_power_flag)) {
      ResponseAppend_P(PSTR("%s\"" D_CMND_POWERLOW "\":\"%s\""), (jsonflg)?",":"", GetStateText(flag));
      jsonflg = true;
    }
    if (EnergyMargin(true, Settings.energy_max_power, energy_power_u, flag, energy_max_power_flag)) {
      ResponseAppend_P(PSTR("%s\"" D_CMND_POWERHIGH "\":\"%s\""), (jsonflg)?",":"", GetStateText(flag));
      jsonflg = true;
    }
    if (EnergyMargin(false, Settings.energy_min_voltage, energy_voltage_u, flag, energy_min_voltage_flag)) {
      ResponseAppend_P(PSTR("%s\"" D_CMND_VOLTAGELOW "\":\"%s\""), (jsonflg)?",":"", GetStateText(flag));
      jsonflg = true;
    }
    if (EnergyMargin(true, Settings.energy_max_voltage, energy_voltage_u, flag, energy_max_voltage_flag)) {
      ResponseAppend_P(PSTR("%s\"" D_CMND_VOLTAGEHIGH "\":\"%s\""), (jsonflg)?",":"", GetStateText(flag));
      jsonflg = true;
    }
    if (EnergyMargin(false, Settings.energy_min_current, energy_current_u, flag, energy_min_current_flag)) {
      ResponseAppend_P(PSTR("%s%s\"" D_CMND_CURRENTLOW "\":\"%s\""), (jsonflg)?",":"", GetStateText(flag));
      jsonflg = true;
    }
    if (EnergyMargin(true, Settings.energy_max_current, energy_current_u, flag, energy_max_current_flag)) {
      ResponseAppend_P(PSTR("%s%s\"" D_CMND_CURRENTHIGH "\":\"%s\""), (jsonflg)?",":"", GetStateText(flag));
      jsonflg = true;
    }
    if (jsonflg) {
      ResponseJsonEnd();
      MqttPublishPrefixTopic_P(TELE, PSTR(D_RSLT_MARGINS), MQTT_TELE_RETAIN);
      EnergyMqttShow();
    }
  }

#ifdef USE_ENERGY_POWER_LIMIT
  // Max Power
  if (Settings.energy_max_power_limit) {
    if (energy_active_power > Settings.energy_max_power_limit) {
      if (!energy_mplh_counter) {
        energy_mplh_counter = Settings.energy_max_power_limit_hold;
      } else {
        energy_mplh_counter--;
        if (!energy_mplh_counter) {
          Response_P(PSTR("{\"" D_JSON_MAXPOWERREACHED "\":\"%d%s\"}"), energy_power_u, (Settings.flag.value_units) ? " " D_UNIT_WATT : "");
          MqttPublishPrefixTopic_P(STAT, S_RSLT_WARNING);
          EnergyMqttShow();
          ExecuteCommandPower(1, POWER_OFF, SRC_MAXPOWER);
          if (!energy_mplr_counter) {
            energy_mplr_counter = Settings.param[P_MAX_POWER_RETRY] +1;
          }
          energy_mplw_counter = Settings.energy_max_power_limit_window;
        }
      }
    }
    else if (power && (energy_power_u <= Settings.energy_max_power_limit)) {
      energy_mplh_counter = 0;
      energy_mplr_counter = 0;
      energy_mplw_counter = 0;
    }
    if (!power) {
      if (energy_mplw_counter) {
        energy_mplw_counter--;
      } else {
        if (energy_mplr_counter) {
          energy_mplr_counter--;
          if (energy_mplr_counter) {
            Response_P(PSTR("{\"" D_JSON_POWERMONITOR "\":\"%s\"}"), GetStateText(1));
            MqttPublishPrefixTopic_P(RESULT_OR_STAT, PSTR(D_JSON_POWERMONITOR));
            ExecuteCommandPower(1, POWER_ON, SRC_MAXPOWER);
          } else {
            Response_P(PSTR("{\"" D_JSON_MAXPOWERREACHEDRETRY "\":\"%s\"}"), GetStateText(0));
            MqttPublishPrefixTopic_P(STAT, S_RSLT_WARNING);
            EnergyMqttShow();
          }
        }
      }
    }
  }

  // Max Energy
  if (Settings.energy_max_energy) {
    energy_daily_u = (uint16_t)(energy_daily * 1000);
    if (!energy_max_energy_state && (RtcTime.hour == Settings.energy_max_energy_start)) {
      energy_max_energy_state = 1;
      Response_P(PSTR("{\"" D_JSON_ENERGYMONITOR "\":\"%s\"}"), GetStateText(1));
      MqttPublishPrefixTopic_P(RESULT_OR_STAT, PSTR(D_JSON_ENERGYMONITOR));
      ExecuteCommandPower(1, POWER_ON, SRC_MAXENERGY);
    }
    else if ((1 == energy_max_energy_state) && (energy_daily_u >= Settings.energy_max_energy)) {
      energy_max_energy_state = 2;
      dtostrfd(energy_daily, 3, mqtt_data);
      Response_P(PSTR("{\"" D_JSON_MAXENERGYREACHED "\":\"%s%s\"}"), mqtt_data, (Settings.flag.value_units) ? " " D_UNIT_KILOWATTHOUR : "");
      MqttPublishPrefixTopic_P(STAT, S_RSLT_WARNING);
      EnergyMqttShow();
      ExecuteCommandPower(1, POWER_OFF, SRC_MAXENERGY);
    }
  }
#endif  // USE_ENERGY_POWER_LIMIT

  if (energy_power_delta) { EnergyMqttShow(); }
}

void EnergyMqttShow(void)
{
// {"Time":"2017-12-16T11:48:55","ENERGY":{"Total":0.212,"Yesterday":0.000,"Today":0.014,"Period":2.0,"Power":22.0,"Factor":1.00,"Voltage":213.6,"Current":0.100}}
  ResponseBeginTime();
  int tele_period_save = tele_period;
  tele_period = 2;
  EnergyShow(true);
  tele_period = tele_period_save;
  ResponseJsonEnd();
  MqttPublishPrefixTopic_P(TELE, PSTR(D_RSLT_SENSOR), Settings.flag.mqtt_sensor_retain);
  energy_power_delta = 0;
}
#endif  // USE_ENERGY_MARGIN_DETECTION

void EnergyOverTempCheck()
{
  if (global_update) {
    if (power && (global_temperature != 9999) && (global_temperature > Settings.param[P_OVER_TEMP])) {  // Device overtemp, turn off relays
      SetAllPower(POWER_ALL_OFF, SRC_OVERTEMP);
    }
  }
  if (energy_data_valid <= ENERGY_WATCHDOG) {
    energy_data_valid++;
    if (energy_data_valid > ENERGY_WATCHDOG) {
      // Reset energy registers
      energy_voltage = 0;
      energy_current = 0;
      energy_active_power = 0;
      if (!isnan(energy_frequency)) { energy_frequency = 0; }
      if (!isnan(energy_power_factor)) { energy_power_factor = 0; }
      energy_start = 0;
    }
  }
}

/*********************************************************************************************\
 * Commands
\*********************************************************************************************/

void EnergyCommandResponse(uint32_t nvalue, uint32_t unit)
{
  if (UNIT_MILLISECOND == unit) {
    snprintf_P(XdrvMailbox.command, CMDSZ, PSTR("%sCal"), XdrvMailbox.command);
    unit = UNIT_MICROSECOND;
  }

  if (Settings.flag.value_units) {
    char sunit[CMDSZ];
    Response_P(S_JSON_COMMAND_LVALUE_SPACE_UNIT, XdrvMailbox.command, nvalue, GetTextIndexed(sunit, sizeof(sunit), unit, kUnitNames));
  } else {
    Response_P(S_JSON_COMMAND_LVALUE, XdrvMailbox.command, nvalue);
  }
}

void CmndEnergyReset(void)
{
  if ((XdrvMailbox.index > 0) && (XdrvMailbox.index <= 3)) {
    char *p;
    unsigned long lnum = strtoul(XdrvMailbox.data, &p, 10);
    if (p != XdrvMailbox.data) {
      switch (XdrvMailbox.index) {
      case 1:
        energy_kWhtoday = lnum *100;
        energy_kWhtoday_delta = 0;
        energy_period = energy_kWhtoday;
        Settings.energy_kWhtoday = energy_kWhtoday;
        RtcSettings.energy_kWhtoday = energy_kWhtoday;
        energy_daily = (float)energy_kWhtoday / 100000;
        if (!RtcSettings.energy_kWhtotal && !energy_kWhtoday) { Settings.energy_kWhtotal_time = LocalTime(); }
        break;
      case 2:
        Settings.energy_kWhyesterday = lnum *100;
        break;
      case 3:
        RtcSettings.energy_kWhtotal = lnum *100;
        Settings.energy_kWhtotal = RtcSettings.energy_kWhtotal;
        energy_total = (float)(RtcSettings.energy_kWhtotal + energy_kWhtoday) / 100000;
        Settings.energy_kWhtotal_time = (!energy_kWhtoday) ? LocalTime() : Midnight();
        break;
      }
    }
    char energy_total_chr[33];
    dtostrfd(energy_total, Settings.flag2.energy_resolution, energy_total_chr);
    char energy_daily_chr[33];
    dtostrfd(energy_daily, Settings.flag2.energy_resolution, energy_daily_chr);
    char energy_yesterday_chr[33];
    dtostrfd((float)Settings.energy_kWhyesterday / 100000, Settings.flag2.energy_resolution, energy_yesterday_chr);

    Response_P(PSTR("{\"%s\":{\"" D_JSON_TOTAL "\":%s,\"" D_JSON_YESTERDAY "\":%s,\"" D_JSON_TODAY "\":%s}}"),
      XdrvMailbox.command, energy_total_chr, energy_yesterday_chr, energy_daily_chr);
  }
}

void CmndPowerCal(void)
{
  energy_command_code = CMND_POWERCAL;
  if (XnrgCall(FUNC_COMMAND)) {  // microseconds
    if ((XdrvMailbox.payload > 999) && (XdrvMailbox.payload < 32001)) {
      Settings.energy_power_calibration = XdrvMailbox.payload;
    }
    EnergyCommandResponse(Settings.energy_power_calibration, UNIT_MICROSECOND);
  }
}

void CmndVoltageCal(void)
{
  energy_command_code = CMND_VOLTAGECAL;
  if (XnrgCall(FUNC_COMMAND)) {  // microseconds
    if ((XdrvMailbox.payload > 999) && (XdrvMailbox.payload < 32001)) {
      Settings.energy_voltage_calibration = XdrvMailbox.payload;
    }
    EnergyCommandResponse(Settings.energy_voltage_calibration, UNIT_MICROSECOND);
  }
}

void CmndCurrentCal(void)
{
  energy_command_code = CMND_CURRENTCAL;
  if (XnrgCall(FUNC_COMMAND)) {  // microseconds
    if ((XdrvMailbox.payload > 999) && (XdrvMailbox.payload < 32001)) {
      Settings.energy_current_calibration = XdrvMailbox.payload;
    }
    EnergyCommandResponse(Settings.energy_current_calibration, UNIT_MICROSECOND);
  }
}

void CmndPowerSet(void)
{
  energy_command_code = CMND_POWERSET;
  if (XnrgCall(FUNC_COMMAND)) {  // Watt
    EnergyCommandResponse(Settings.energy_power_calibration, UNIT_MILLISECOND);
  }
}

void CmndVoltageSet(void)
{
  energy_command_code = CMND_VOLTAGESET;
  if (XnrgCall(FUNC_COMMAND)) {  // Volt
    EnergyCommandResponse(Settings.energy_voltage_calibration, UNIT_MILLISECOND);
  }
}

void CmndCurrentSet(void)
{
  energy_command_code = CMND_CURRENTSET;
  if (XnrgCall(FUNC_COMMAND)) {  // milliAmpere
    EnergyCommandResponse(Settings.energy_current_calibration, UNIT_MILLISECOND);
  }
}

void CmndFrequencySet(void)
{
  energy_command_code = CMND_FREQUENCYSET;
  if (XnrgCall(FUNC_COMMAND)) {  // Hz
    EnergyCommandResponse(Settings.energy_frequency_calibration, UNIT_MILLISECOND);
  }
}

#ifdef USE_ENERGY_MARGIN_DETECTION
void CmndPowerDelta(void)
{
  if ((XdrvMailbox.payload >= 0) && (XdrvMailbox.payload < 101)) {
    Settings.energy_power_delta = XdrvMailbox.payload;
  }
  EnergyCommandResponse(Settings.energy_power_delta, UNIT_PERCENTAGE);
}

void CmndPowerLow(void)
{
  if ((XdrvMailbox.payload >= 0) && (XdrvMailbox.payload < 3601)) {
    Settings.energy_min_power = XdrvMailbox.payload;
  }
  EnergyCommandResponse(Settings.energy_min_power, UNIT_WATT);
}

void CmndPowerHigh(void)
{
  if ((XdrvMailbox.payload >= 0) && (XdrvMailbox.payload < 3601)) {
    Settings.energy_max_power = XdrvMailbox.payload;
  }
  EnergyCommandResponse(Settings.energy_max_power, UNIT_WATT);
}

void CmndVoltageLow(void)
{
  if ((XdrvMailbox.payload >= 0) && (XdrvMailbox.payload < 501)) {
    Settings.energy_min_voltage = XdrvMailbox.payload;
  }
  EnergyCommandResponse(Settings.energy_min_voltage, UNIT_VOLT);
}

void CmndVoltageHigh(void)
{
  if ((XdrvMailbox.payload >= 0) && (XdrvMailbox.payload < 501)) {
    Settings.energy_max_voltage = XdrvMailbox.payload;
  }
  EnergyCommandResponse(Settings.energy_max_voltage, UNIT_VOLT);
}

void CmndCurrentLow(void)
{
  if ((XdrvMailbox.payload >= 0) && (XdrvMailbox.payload < 16001)) {
    Settings.energy_min_current = XdrvMailbox.payload;
  }
  EnergyCommandResponse(Settings.energy_min_current, UNIT_MILLIAMPERE);
}

void CmndCurrentHigh(void)
{
  if ((XdrvMailbox.payload >= 0) && (XdrvMailbox.payload < 16001)) {
    Settings.energy_max_current = XdrvMailbox.payload;
  }
  EnergyCommandResponse(Settings.energy_max_current, UNIT_MILLIAMPERE);
}

#ifdef USE_ENERGY_POWER_LIMIT
void CmndMaxPower(void)
{
  if ((XdrvMailbox.payload >= 0) && (XdrvMailbox.payload < 3601)) {
    Settings.energy_max_power_limit = XdrvMailbox.payload;
  }
  EnergyCommandResponse(Settings.energy_max_power_limit, UNIT_WATT);
}

void CmndMaxPowerHold(void)
{
  if ((XdrvMailbox.payload >= 0) && (XdrvMailbox.payload < 3601)) {
    Settings.energy_max_power_limit_hold = (1 == XdrvMailbox.payload) ? MAX_POWER_HOLD : XdrvMailbox.payload;
  }
  EnergyCommandResponse(Settings.energy_max_power_limit_hold, UNIT_SECOND);
}

void CmndMaxPowerWindow(void)
{
  if ((XdrvMailbox.payload >= 0) && (XdrvMailbox.payload < 3601)) {
    Settings.energy_max_power_limit_window = (1 == XdrvMailbox.payload) ? MAX_POWER_WINDOW : XdrvMailbox.payload;
  }
  EnergyCommandResponse(Settings.energy_max_power_limit_window, UNIT_SECOND);
}

void CmndSafePower(void)
{
  if ((XdrvMailbox.payload >= 0) && (XdrvMailbox.payload < 3601)) {
    Settings.energy_max_power_safe_limit = XdrvMailbox.payload;
  }
  EnergyCommandResponse(Settings.energy_max_power_safe_limit, UNIT_WATT);
}

void CmndSafePowerHold(void)
{
  if ((XdrvMailbox.payload >= 0) && (XdrvMailbox.payload < 3601)) {
    Settings.energy_max_power_safe_limit_hold = (1 == XdrvMailbox.payload) ? SAFE_POWER_HOLD : XdrvMailbox.payload;
  }
  EnergyCommandResponse(Settings.energy_max_power_safe_limit_hold, UNIT_SECOND);
}

void CmndSafePowerWindow(void)
{
  if ((XdrvMailbox.payload >= 0) && (XdrvMailbox.payload < 1440)) {
    Settings.energy_max_power_safe_limit_window = (1 == XdrvMailbox.payload) ? SAFE_POWER_WINDOW : XdrvMailbox.payload;
  }
  EnergyCommandResponse(Settings.energy_max_power_safe_limit_window, UNIT_MINUTE);
}

void CmndMaxEnergy(void)
{
  if ((XdrvMailbox.payload >= 0) && (XdrvMailbox.payload < 3601)) {
    Settings.energy_max_energy = XdrvMailbox.payload;
    energy_max_energy_state = 3;
  }
  EnergyCommandResponse(Settings.energy_max_energy, UNIT_WATTHOUR);
}

void CmndMaxEnergyStart(void)
{
  if ((XdrvMailbox.payload >= 0) && (XdrvMailbox.payload < 24)) {
    Settings.energy_max_energy_start = XdrvMailbox.payload;
  }
  EnergyCommandResponse(Settings.energy_max_energy_start, UNIT_HOUR);
}
#endif  // USE_ENERGY_POWER_LIMIT
#endif  // USE_ENERGY_MARGIN_DETECTION

void EnergyDrvInit(void)
{
  energy_flg = ENERGY_NONE;
  XnrgCall(FUNC_PRE_INIT);
}

void EnergySnsInit(void)
{
  XnrgCall(FUNC_INIT);

  if (energy_flg) {
    energy_kWhtoday = (RtcSettingsValid()) ? RtcSettings.energy_kWhtoday : (RtcTime.day_of_year == Settings.energy_kWhdoy) ? Settings.energy_kWhtoday : 0;
    energy_kWhtoday_delta = 0;
    energy_period = energy_kWhtoday;
    EnergyUpdateToday();
    ticker_energy.attach_ms(200, Energy200ms);
  }
}

#ifdef USE_WEBSERVER
const char HTTP_ENERGY_SNS1[] PROGMEM =
  "{s}" D_POWERUSAGE_APPARENT "{m}%s " D_UNIT_VA "{e}"
  "{s}" D_POWERUSAGE_REACTIVE "{m}%s " D_UNIT_VAR "{e}"
  "{s}" D_POWER_FACTOR "{m}%s{e}";

const char HTTP_ENERGY_SNS2[] PROGMEM =
  "{s}" D_ENERGY_TODAY  "{m}%s " D_UNIT_KILOWATTHOUR "{e}"
  "{s}" D_ENERGY_YESTERDAY "{m}%s " D_UNIT_KILOWATTHOUR "{e}"
  "{s}" D_ENERGY_TOTAL "{m}%s " D_UNIT_KILOWATTHOUR "{e}";      // {s} = <tr><th>, {m} = </th><td>, {e} = </td></tr>
#endif  // USE_WEBSERVER

void EnergyShow(bool json)
{
  char speriod[20];
//  char sfrequency[20];

  bool show_energy_period = (0 == tele_period);

  float power_factor = energy_power_factor;

  char apparent_power_chr[33];
  char reactive_power_chr[33];
  char power_factor_chr[33];
  char frequency_chr[33];
  if (!energy_type_dc) {
    if (energy_current_available && energy_voltage_available) {
      float apparent_power = energy_apparent_power;
      if (isnan(apparent_power)) {
        apparent_power = energy_voltage * energy_current;
      }
      if (apparent_power < energy_active_power) {  // Should be impossible
        energy_active_power = apparent_power;
      }

      if (isnan(power_factor)) {
        power_factor = (energy_active_power && apparent_power) ? energy_active_power / apparent_power : 0;
        if (power_factor > 1) power_factor = 1;
      }

      float reactive_power = energy_reactive_power;
      if (isnan(reactive_power)) {
        reactive_power = 0;
        uint32_t difference = ((uint32_t)(apparent_power * 100) - (uint32_t)(energy_active_power * 100)) / 10;
        if ((energy_current > 0.005) && ((difference > 15) || (difference > (uint32_t)(apparent_power * 100 / 1000)))) {
          // calculating reactive power only if current is greater than 0.005A and
          // difference between active and apparent power is greater than 1.5W or 1%
          reactive_power = (float)(RoundSqrtInt((uint32_t)(apparent_power * apparent_power * 100) - (uint32_t)(energy_active_power * energy_active_power * 100))) / 10;
        }
      }

      dtostrfd(apparent_power, Settings.flag2.wattage_resolution, apparent_power_chr);
      dtostrfd(reactive_power, Settings.flag2.wattage_resolution, reactive_power_chr);
      dtostrfd(power_factor, 2, power_factor_chr);
    }
    if (!isnan(energy_frequency)) {
      dtostrfd(energy_frequency, Settings.flag2.frequency_resolution, frequency_chr);
    }
  }

  char voltage_chr[33];
  dtostrfd(energy_voltage, Settings.flag2.voltage_resolution, voltage_chr);
  char current_chr[33];
  dtostrfd(energy_current, Settings.flag2.current_resolution, current_chr);
  char active_power_chr[33];
  dtostrfd(energy_active_power, Settings.flag2.wattage_resolution, active_power_chr);
  char energy_daily_chr[33];
  dtostrfd(energy_daily, Settings.flag2.energy_resolution, energy_daily_chr);
  char energy_yesterday_chr[33];
  dtostrfd((float)Settings.energy_kWhyesterday / 100000, Settings.flag2.energy_resolution, energy_yesterday_chr);
  char energy_total_chr[33];
  dtostrfd(energy_total, Settings.flag2.energy_resolution, energy_total_chr);

  float energy = 0;
  char energy_period_chr[33];
  if (show_energy_period) {
    if (energy_period) energy = (float)(energy_kWhtoday - energy_period) / 100;
    energy_period = energy_kWhtoday;
    dtostrfd(energy, Settings.flag2.wattage_resolution, energy_period_chr);
    snprintf_P(speriod, sizeof(speriod), PSTR(",\"" D_JSON_PERIOD "\":%s"), energy_period_chr);
  }

  if (json) {
    ResponseAppend_P(PSTR(",\"" D_RSLT_ENERGY "\":{\"" D_JSON_TOTAL_START_TIME "\":\"%s\",\"" D_JSON_TOTAL "\":%s,\"" D_JSON_YESTERDAY "\":%s,\"" D_JSON_TODAY "\":%s%s,\"" D_JSON_POWERUSAGE "\":%s"),
      GetDateAndTime(DT_ENERGY).c_str(), energy_total_chr, energy_yesterday_chr, energy_daily_chr, (show_energy_period) ? speriod : "", active_power_chr);
    if (!energy_type_dc) {
      if (energy_current_available && energy_voltage_available) {
        ResponseAppend_P(PSTR(",\"" D_JSON_APPARENT_POWERUSAGE "\":%s,\"" D_JSON_REACTIVE_POWERUSAGE "\":%s,\"" D_JSON_POWERFACTOR "\":%s"),
          apparent_power_chr, reactive_power_chr, power_factor_chr);
      }
      if (!isnan(energy_frequency)) {
        ResponseAppend_P(PSTR(",\"" D_JSON_FREQUENCY "\":%s"), frequency_chr);
      }
    }
    if (energy_voltage_available) {
      ResponseAppend_P(PSTR(",\"" D_JSON_VOLTAGE "\":%s"), voltage_chr);
    }
    if (energy_current_available) {
      ResponseAppend_P(PSTR(",\"" D_JSON_CURRENT "\":%s"), current_chr);
    }
    ResponseJsonEnd();

#ifdef USE_DOMOTICZ
    if (show_energy_period) {  // Only send if telemetry
      dtostrfd(energy_total * 1000, 1, energy_total_chr);
      DomoticzSensorPowerEnergy((int)energy_active_power, energy_total_chr);  // PowerUsage, EnergyToday
      if (energy_voltage_available) {
        DomoticzSensor(DZ_VOLTAGE, voltage_chr);  // Voltage
      }
      if (energy_current_available) {
        DomoticzSensor(DZ_CURRENT, current_chr);  // Current
      }
    }
#endif  // USE_DOMOTICZ
#ifdef USE_KNX
    if (show_energy_period) {
      if (energy_voltage_available) {
        KnxSensor(KNX_ENERGY_VOLTAGE, energy_voltage);
      }
      if (energy_current_available) {
        KnxSensor(KNX_ENERGY_CURRENT, energy_current);
      }
      KnxSensor(KNX_ENERGY_POWER, energy_active_power);
      if (!energy_type_dc) { KnxSensor(KNX_ENERGY_POWERFACTOR, power_factor); }
      KnxSensor(KNX_ENERGY_DAILY, energy_daily);
      KnxSensor(KNX_ENERGY_TOTAL, energy_total);
      KnxSensor(KNX_ENERGY_START, energy_start);
    }
#endif  // USE_KNX
#ifdef USE_WEBSERVER
  } else {
    if (energy_voltage_available) {
      WSContentSend_PD(PSTR("{s}" D_VOLTAGE "{m}%s " D_UNIT_VOLT "{e}"), voltage_chr);
    }
    if (energy_current_available) {
      WSContentSend_PD(PSTR("{s}" D_CURRENT "{m}%s " D_UNIT_AMPERE "{e}"), current_chr);
    }
    WSContentSend_PD(PSTR("{s}" D_POWERUSAGE "{m}%s " D_UNIT_WATT "{e}"), active_power_chr);
    if (!energy_type_dc) {
      if (energy_current_available && energy_voltage_available) {
        WSContentSend_PD(HTTP_ENERGY_SNS1, apparent_power_chr, reactive_power_chr, power_factor_chr);
      }
      if (!isnan(energy_frequency)) {
        WSContentSend_PD(PSTR("{s}" D_FREQUENCY "{m}%s " D_UNIT_HERTZ "{e}"), frequency_chr);
      }
    }
    WSContentSend_PD(HTTP_ENERGY_SNS2, energy_daily_chr, energy_yesterday_chr, energy_total_chr);
#endif  // USE_WEBSERVER
  }
}

/*********************************************************************************************\
 * Interface
\*********************************************************************************************/

bool Xdrv03(uint8_t function)
{
  bool result = false;

  if (FUNC_PRE_INIT == function) {
    EnergyDrvInit();
  }
  else if (energy_flg) {
    switch (function) {
      case FUNC_LOOP:
        XnrgCall(FUNC_LOOP);
        break;
#ifdef USE_ENERGY_MARGIN_DETECTION
      case FUNC_SET_POWER:
        energy_power_steady_cntr = 2;
        break;
#endif  // USE_ENERGY_MARGIN_DETECTION
      case FUNC_SERIAL:
        result = XnrgCall(FUNC_SERIAL);
        break;
      case FUNC_COMMAND:
        result = DecodeCommand(kEnergyCommands, EnergyCommand);
        break;
    }
  }
  return result;
}

bool Xsns03(uint8_t function)
{
  bool result = false;

  if (energy_flg) {
    switch (function) {
      case FUNC_INIT:
        EnergySnsInit();
        break;
      case FUNC_EVERY_SECOND:
#ifdef USE_ENERGY_MARGIN_DETECTION
        EnergyMarginCheck();
#endif  // USE_ENERGY_MARGIN_DETECTION
        EnergyOverTempCheck();
        break;
      case FUNC_JSON_APPEND:
        EnergyShow(true);
        break;
#ifdef USE_WEBSERVER
      case FUNC_WEB_SENSOR:
        EnergyShow(false);
        break;
#endif  // USE_WEBSERVER
      case FUNC_SAVE_BEFORE_RESTART:
        EnergySaveState();
        break;
    }
  }
  return result;
}

#endif  // USE_ENERGY_SENSOR