Theo Arends
fb2c10cb97
Add SPI display driver SSD1331 Color oled
...
Add SPI display driver SSD1331 Color oled by Jeroen Vermeulen (#10376 )
2021-01-04 14:26:27 +01:00
Theo Arends
619e4bbfb5
Add command ``RuleTimer0`` to access all RuleTimers at once
...
Add command ``RuleTimer0`` to access all RuleTimers at once (#10352 )
2021-01-03 17:31:44 +01:00
Theo Arends
d028e5c847
Update changelog
2021-01-03 17:04:14 +01:00
Theo Arends
54c1a2d029
Add support for SPI display driver for ST7789 TFT
...
Add support for SPI display driver for ST7789 TFT by Gerhard Mutz (#9037 )
2021-01-01 15:05:58 +01:00
Theo Arends
58e6ec55f1
Breaking change replacing SPI CS and SPI DC
...
Breaking change replacing SPI CS and SPI DC by device specific CS and DC
2020-12-31 16:17:30 +01:00
Theo Arends
9c2b8040f1
Revert "Breaking change replaced NRF24L01 GPIO selection"
...
This reverts commit 01f3a7da19
.
2020-12-30 17:52:05 +01:00
Theo Arends
01f3a7da19
Breaking change replaced NRF24L01 GPIO selection
...
Breaking change replaced NRF24L01 GPIO selection from ``GPIO_SPI_CS`` by ``GPIO_NRF24_CS`` and ``GPIO_SPI_DC`` by ``GPIO_NRF24_DC``
2020-12-30 17:49:52 +01:00
Theo Arends
37bd2a99f6
Add basic support for ESP32 Odroid Go 16MB binary tasmota32-odroidgo.bin
...
Add basic support for ESP32 Odroid Go 16MB binary tasmota32-odroidgo.bin (#8630 )
2020-12-29 18:03:05 +01:00
Theo Arends
f004cfea60
Breaking change regarding MFRC522 and ILI9341
...
- Replaced MFRC522 13.56MHz rfid card reader GPIO selection from ``GPIO_SPI_CS`` by ``GPIO_RC522_CS``
- Replaced ILI9341 GPIO selection from ``GPIO_SPI_CS`` by ``GPIO_ILI9341_CS`` and ``GPIO_SPI_DC`` by ``GPIO_ILI9341_DC``
2020-12-29 17:42:53 +01:00
Theo Arends
c4410a9823
Update changelog
2020-12-29 10:59:36 +01:00
Theo Arends
d161026534
Add support for Afrikaans language translations by Christiaan Heerze
2020-12-28 11:53:02 +01:00
Theo Arends
83b3aa576d
Add BSSID and Signal Strength Indicator to GUI wifi scan result ( #10253 )
...
Add BSSID and Signal Strength Indicator to GUI wifi scan result (#10253 )
2020-12-27 16:25:34 +01:00
Theo Arends
d75beb92f3
Add support character `#` to be replaced by `space`-character
...
Add support character `#` to be replaced by `space`-character in command ``Publish`` topic (#10258 )
2020-12-26 12:18:16 +01:00
Theo Arends
fbdb0aae0d
Update changelogs
2020-12-24 13:58:32 +01:00
Theo Arends
59992d1954
Add support for FTC532 8-button touch controller
...
Add support for FTC532 8-button touch controller by Peter Franck (#10222 )
2020-12-22 16:47:24 +01:00
Theo Arends
6ea7359821
Update changelog
2020-12-21 15:23:37 +01:00
Theo Arends
85ed1bebca
Fix compile error when ``#ifdef USE_IR_RECEIVE`` is disabled regression from 9.1.0.2
...
Fix compile error when ``#ifdef USE_IR_RECEIVE`` is disabled regression from 9.1.0.2
2020-12-20 17:22:48 +01:00
Theo Arends
09bb1ecb8e
Fix ESP32 LoadStoreError when using ``#define USER_TEMPLATE``
...
Fix ESP32 LoadStoreError when using ``#define USER_TEMPLATE`` (#9506 )
2020-12-20 16:40:49 +01:00
Theo Arends
7599dab36d
Fix Wyze bulb option
2020-12-20 15:25:13 +01:00
Theo Arends
dcfb74f457
Support for GPIO option selection
...
- Support for GPIO option selection
- Gpio ``Option_a1`` enabling PWM1 high impedance if powered off and no fading as used by Wyze bulbs (#10196 )
2020-12-20 13:22:01 +01:00
Theo Arends
9153746d5d
Update changelog
2020-12-19 12:25:55 +01:00
Theo Arends
9fb2f18169
Update changelog
2020-12-19 12:25:02 +01:00
Theo Arends
b7af08c03b
Redesign syslog and mqttlog using log buffer
...
Redesign syslog and mqttlog using log buffer (#10164 )
2020-12-18 15:37:20 +01:00
Theo Arends
0a7d441e65
Add support for P9813 RGB Led MOSFET controller
...
Add support for P9813 RGB Led MOSFET controller (#10104 )
2020-12-17 16:33:26 +01:00
Theo Arends
078a9a258a
Add milliseconds to console output
...
Add milliseconds to console output (#10152 )
2020-12-17 14:16:53 +01:00
Theo Arends
eaa9da7d11
Bump version to v9.2.0.1
2020-12-17 14:03:02 +01:00
Theo Arends
694a675ddf
Update changelog
2020-12-16 14:39:37 +01:00
Jason2866
294a72760c
Update RELEASENOTES.md
2020-12-15 20:18:25 +01:00
Jason2866
5156db1221
Remove mDNS note since it is disabled by default
2020-12-15 20:11:59 +01:00
Theo Arends
b41248eb23
Update changelog
2020-12-15 16:45:25 +01:00
Theo Arends
80434500da
mDNS has been disabled from all pre-compiled binaries to allow new features
...
mDNS has been disabled from all pre-compiled binaries to allow new features
2020-12-08 11:49:11 +01:00
Theo Arends
821270adc1
Update changelog
2020-12-08 11:06:19 +01:00
Theo Arends
d7ed311587
Update changelog
2020-12-07 12:34:09 +01:00
Theo Arends
931929c952
Add support for MFRC522
...
Add support for SPI connected MFRC522 13.56MHz rfid card reader (#9916 )
2020-12-06 16:32:07 +01:00
Theo Arends
80ab642076
Add command ``RfProtocol`` to control RcSwitch
...
Add command ``RfProtocol`` to control RcSwitch receive protocols by BBBits (#10063 )
2020-12-06 14:58:00 +01:00
Theo Arends
75d35d407e
Removed PN532 define USE_PN532_CAUSE_EVENTS
...
Removed PN532 define USE_PN532_CAUSE_EVENTS replaced by generic rule trigger `on pn532#uid=`
2020-12-02 18:01:38 +01:00
Theo Arends
c85dba8c1e
Update changelog
2020-12-02 14:26:40 +01:00
Theo Arends
0c95f2ec8e
Update changelog
2020-11-28 16:10:19 +01:00
Theo Arends
bb85fa95b0
Update changelog
2020-11-27 18:26:56 +01:00
Theo Arends
4b5dbe7a86
Fix reset to defaults after 6 hours of DeepSleep
...
Fix reset to defaults after 6 hours of DeepSleep (#9993 )
2020-11-27 16:43:56 +01:00
Theo Arends
742171ca5e
Add support for multiple WeMo devices
...
Add support for multiple WeMo devices by Magic73 (#9208 )
2020-11-25 18:17:44 +01:00
Theo Arends
3f597001d1
Add support for common anode sevenseg displays
...
Add support for common anode sevenseg displays by adding ``#define USE_DISPLAY_SEVENSEG_COMMON_ANODE`` by Ken Sanislo (#9963 )
2020-11-25 17:30:25 +01:00
Theo Arends
9433b691a4
Fix ESP32 TasmotaClient firmware upgrade
...
Fix ESP32 TasmotaClient firmware upgrade (#9218 )
2020-11-25 14:58:18 +01:00
Theo Arends
547e5d9c5d
Fix command ``gpio``
...
Fix command ``gpio`` using non-indexed functions regression from v9.1.0 (#9962 )
2020-11-24 15:14:22 +01:00
Theo Arends
17c94a2b62
Changed MQTT Wifi connection timeout
...
Changed MQTT Wifi connection timeout from 5000 to 200 mSec (#9886 )
2020-11-17 16:44:00 +01:00
Theo Arends
ab886db6b2
Update change log
2020-11-17 13:56:07 +01:00
Theo Arends
e1963e98dc
Breaking change KNX DPT9 to DPT14
...
- Version bump to 9.1.0.2
- Breaking change KNX DPT9 (16-bit float) to DPT14 (32-bit float) by Adrian Scillato (#9811 , #9888 )
2020-11-17 10:36:57 +01:00
Theo Arends
c02770ce96
Add support for Shelly Dimmer 1 and 2
...
Add support for Shelly Dimmer 1 and 2 by James Turton (#9854 )
2020-11-14 16:43:32 +01:00
Theo Arends
abb56854f5
Update changelog
2020-11-14 13:34:39 +01:00
Theo Arends
203124d678
Add command ``SetOption115 1`` to enable ESP32 MiBle
...
Add command ``SetOption115 1`` to enable ESP32 MiBle
2020-11-13 17:00:44 +01:00
Theo Arends
846da7b6ca
Fix GUI MqttUser and MqttPassword updates
...
Fix GUI MqttUser and MqttPassword updates when TLS is compiled in (#9825 )
2020-11-13 13:54:51 +01:00
Theo Arends
14034ee9d1
Fix KNX buttons, switches and sensors detection
...
Fix KNX buttons, switches and sensors detection regression from v9.1.0 (#9811 )
2020-11-13 11:21:28 +01:00
Theo Arends
9915c9e731
Fixed Telegram group chatid not supported
...
Fixed Telegram group chatid not supported (#9831 )
2020-11-13 09:54:01 +01:00
Theo Arends
4b6465fd10
Add support for fingerprint sensor
...
Add support for AS608 optical and R503 capacitive fingerprint sensor
2020-11-11 17:31:48 +01:00
Theo Arends
75201df20f
Add OTA download path to migration data
2020-11-10 10:39:36 +01:00
Theo Arends
371b00823e
Change Sonoff L1 color up scaling and color margin detection
...
Change Sonoff L1 color up scaling and color margin detection (#9545 )
2020-11-09 15:04:22 +01:00
Theo Arends
85612776f6
Add Tuya commands
...
Add commands ``TuyaRGB``, ``TuyaEnum`` and ``TuyaEnumList`` (#9769 )
2020-11-08 12:51:08 +01:00
Theo Arends
138ddfb16e
Removed version compatibility check
...
Removed version compatibility check
2020-11-07 15:43:52 +01:00
Theo Arends
e498b28864
Add support for EZO PMP sensors
...
Add support for EZO PMP sensors by Christopher Tremblay (#9760 )
2020-11-07 11:35:33 +01:00
Theo Arends
780db5271c
Update changelog
2020-11-07 11:09:16 +01:00
Theo Arends
488a360d5b
Fixed NTP fallback server functionality
...
Fixed NTP fallback server functionality (#9739 )
2020-11-06 15:22:03 +01:00
Theo Arends
cc69244a8f
Changed platformio compiler option
...
Changed platformio compiler option `no target align` enabled for stage
2020-11-05 13:55:17 +01:00
Theo Arends
cdf66b6eff
Version bump
2020-11-05 13:33:17 +01:00
Theo Arends
4d8fab75a8
Add command ``DimmerStep 1..50``
...
Add command ``DimmerStep 1..50`` to change default dimmer up and down step of 10% by James Turton (#9733 )
2020-11-05 10:01:15 +01:00
Theo Arends
78196f0391
Removed auto output selection
...
Removed auto output selection of decimal or hexadecimal data based on user input. Now only based on ``SetOption17``
2020-11-04 17:42:30 +01:00
Theo Arends
8376dd8982
Fix switches
2020-11-04 16:31:53 +01:00
Theo Arends
7915e82cb0
Prep release 9.1
2020-11-04 15:57:40 +01:00
Theo Arends
9f191d9214
Breaking change when ``SetOption73 1``
...
Breaking change when ``SetOption73 1`` JSON result from `{"ACTION":"SINGLE"}` to `{"Button1":{"Action":"SINGLE"}}`
2020-11-03 15:42:55 +01:00
Theo Arends
54f9532919
Add command ``SetOption114 1``
...
Add command ``SetOption114 1`` to detach Swiches from Relays and enable MQTT action state for all the SwitchModes
2020-11-03 14:34:02 +01:00
Theo Arends
b869abb0b6
Fix rule handling of JSON ``null``
...
Fix rule handling of JSON ``null`` regression from v8.5.0.1 (#9685 )
2020-11-02 14:35:19 +01:00
Theo Arends
67bd5daf45
Update changelog
2020-11-02 11:58:23 +01:00
Theo Arends
c2482e9913
Add command ``SwitchText``
...
Add command ``SwitchText`` to change JSON switch names by barbudor (#9691 )
2020-11-01 13:26:35 +01:00
Theo Arends
0057a1dd34
Update template information
2020-11-01 12:01:51 +01:00
Theo Arends
31e5617043
Add command ``Gpios 255``
...
Add command ``Gpios 255`` to show all possible GPIO configurations
2020-10-30 16:08:38 +01:00
Theo Arends
6f7a20e2ec
Add support for EZO PRS sensors
...
Add support for EZO PRS sensors by Christopher Tremblay (#9659 )
2020-10-29 11:53:25 +01:00
Jason2866
187067ee88
Ota url changed to .gz
2020-10-28 18:46:12 +01:00
Theo Arends
d5a71000ea
Change default otaurl
...
Change default otaurl in my_user_config.h to http://ota.tasmota.com/tasmota/release/tasmota.bin.gz
2020-10-28 14:17:45 +01:00
Theo Arends
85d2626e84
Refactor feature list build
2020-10-28 11:37:59 +01:00
Theo Arends
e030b9fece
Fix rule expressions using mems corrupts character pool
...
Fix rule expressions using mems corrupts character pool (#9301 )
2020-10-26 16:42:44 +01:00
Theo Arends
8d71ade035
Fixed rule Break not working as expected
...
Fixed rule Break not working as expected when ONCE is enabled (#9245 )
2020-10-25 17:38:06 +01:00
Theo Arends
a96218fc1c
v9.0.0.3
...
- Add TLS in binary tasmota-zbbridge (#9620 )
- Add support for EZO CO2 sensors by Christopher Tremblay (#9619 )
2020-10-25 14:46:13 +01:00
Theo Arends
b92b59b2b1
Add command ``SetOption113 1``
...
Add command ``SetOption113 1`` to set dimmer low on rotary dial after power off (#8263 )
2020-10-25 12:59:24 +01:00
Theo Arends
582c32f5b9
Add support for EZO EC sensor
...
Add support for EZO EC sensors by Christopher Tremblay (#9613 )
2020-10-24 12:41:08 +02:00
Theo Arends
1021cf3ca5
Update changelog and releasenotes
2020-10-23 16:56:03 +02:00
Theo Arends
0f805014e6
Support WT32-ETH01
...
- Support for fixed output Hi or Lo GPIO
- Support for ESP32 based Wireless-Tag WT32-ETH01 (#9496 )
2020-10-23 15:18:58 +02:00
blakadder
a9c56f7b1c
Update RELEASENOTES.md
2020-10-22 11:30:20 +02:00
Theo Arends
eea472f1fc
Tasmota Arduino Core v2.7.4.5
...
Tasmota Arduino Core v2.7.4.5 allowing webpassword over 47 characters (#9687 )
2020-10-22 11:25:05 +02:00
Theo Arends
83a090b5a9
Rotary driver adjusted for MiDesk if selected
...
Rotary driver adjusted accordingly if Mi Desk Lamp module is selected (#9399 )
2020-10-20 15:13:12 +02:00
Theo Arends
500fb147c4
Add Breaking Changed to Release Notes
...
- Support for EZO RTD sensors by Christopher Tremblay (#9585 )
- On ZigbeeBridge support for glowing led when permit join is active (#9581 )
- Support for PWM Dimmer multi-press and ledmask (#9584 )
2020-10-20 14:04:29 +02:00
Theo Arends
54383f77c4
Change ``#define MQTT_FINGERPRINT``
...
Change ``#define MQTT_FINGERPRINT`` from string to hexnumbers (#9570 )
2020-10-19 12:15:11 +02:00
Theo Arends
38e2638f07
Add support for EZO Ph and ORP sensors
...
Add support for EZO Ph and ORP sensors by Christopher Tremblay (#9567 )
2020-10-18 15:36:17 +02:00
Theo Arends
d9dfaf88f3
Add command ``SwitchMode 15``
...
Add command ``SwitchMode 15`` sending only MQTT message on switch change (#9596 )
2020-10-18 12:17:31 +02:00
Theo Arends
f13f7355f4
Fix TuyaMcu energy display
...
Fix TuyaMcu energy display regression from v8.5.0.1 (#9547 )
2020-10-17 12:48:45 +02:00
Theo Arends
7bc8956d86
Changed management of serial baudrate
...
Changed management of serial baudrate (#9554 )
2020-10-16 15:18:16 +02:00
Theo Arends
98d2dd8f39
Fix rule handling of Var or Mem using text
...
Fix rule handling of Var or Mem using text regression from v8.5.0.1 (#9540 )
2020-10-15 14:42:46 +02:00
Theo Arends
29e73dae9b
Add command ``NoDelay``
...
Add command ``NoDelay`` for immediate backlog command execution by Erik Montnemery (#9544 )
2020-10-15 12:32:40 +02:00
Theo Arends
fc524dff75
Support for Vietnamese language translations
2020-10-12 11:29:36 +02:00
Theo Arends
3264acfffe
Fix Telegram message decoding error regression from v8.5.0.1
2020-10-11 14:23:56 +02:00
Theo Arends
fc04c50674
Convert AdcParam parameters from versions before v9.0.0.2
...
- Command ``Gpio17`` replaces command ``Adc``
- Command ``Gpios`` replaces command ``Adcs``
2020-10-11 11:31:46 +02:00
Theo Arends
b8e55203b6
Fix Thermostat sensor status corruption
...
Fix Thermostat sensor status corruption regression from 8.5.0.1 (#9449 )
2020-10-10 15:19:11 +02:00
Theo Arends
0949dda650
Update changelog/releasenotes
2020-10-10 12:21:04 +02:00
Theo Arends
f0bcd6eb3d
Move (partly) rewritten CHANGELOG.md to root
2020-10-09 16:40:10 +02:00
Theo Arends
d5b8d6ae24
Add support for analog buttons
...
Add support for analog buttons indexed within standard button range
2020-10-08 18:27:12 +02:00
Theo Arends
e8c1e44069
Add PWMD and IRremote features
...
- Add PWM dimmer color/trigger on tap, SO88 led, DGR WITH_LOCAL flag by Paul Diem (#9474 )
- Add support for stateful ACs using ``StateMode`` in tasmota-ir.bin by Arik Yavilevich (#9472 )
2020-10-07 10:07:17 +02:00
Theo Arends
0c90f71e00
Fix ADC initalization sequence
...
Fix ADC initalization sequence (#9473 )
2020-10-06 12:12:14 +02:00
Theo Arends
539ba11690
Add support for inverted NeoPixelBus data
...
Add support for inverted NeoPixelBus data line by enabling ``#define USE_WS2812_INVERTED`` (#8988 )
2020-10-05 19:03:40 +02:00
Theo Arends
0eef729d8f
Remove migration support from before 7.0
...
- Remove support for direct upgrade from Tasmota versions before 7.0
- Remove auto config update for all Friendlynames and Switchtopic from Tasmota versions before 8.0
2020-10-05 18:12:32 +02:00
Theo Arends
f0ab0d274d
Change NeoPixelBus library from v2.5.0.09 to v2.6.0
2020-10-05 17:32:30 +02:00
Theo Arends
1f49daacd3
Fix light wakeup exception 0
...
Fix light wakeup exception 0 (divide by zero) when ``WakeupDuration`` is not initialised (#9466 )
2020-10-05 15:16:43 +02:00
Theo Arends
d442b64d90
Fix shutter timing problem
...
Fix shutter timing problem due to buffer overflow in calibration matrix (#9458 )
2020-10-05 12:56:12 +02:00
Theo Arends
96b2c8010e
Change ``Status`` command output for disabled status types
...
Change ``Status`` command output for disabled status types
2020-10-05 11:45:58 +02:00
Theo Arends
3c9583e1ff
Fix exception 28 due to device group buffer overflow
...
Fix exception 28 due to device group buffer overflow (#9459 )
2020-10-04 17:46:45 +02:00
Theo Arends
677bb85ecd
Fix ledlink blink when no network connected
...
Fix ledlink blink when no network connected regression from 8.3.1.4 (#9292 )
2020-10-04 17:08:11 +02:00
Theo Arends
d100ba3592
Update changelog and releasenotes
2020-10-04 12:48:26 +02:00
Theo Arends
ad3cfa6cbb
Add SDM630 three phase ImportActive Energy display
...
Add SDM630 three phase ImportActive Energy display when ``#define SDM630_IMPORT`` is enabled by Janusz Kostorz (#9124 )
2020-10-03 12:46:58 +02:00
Theo Arends
dab734ad3f
Update v9.0.0.1 information
2020-10-03 12:08:43 +02:00
Theo Arends
a9630b9d05
Change pulsetime to allow use for all relays
...
Change pulsetime to allow use for all relays with 8 interleaved so ``Pulsetime1`` is valid for Relay1, Relay9, Relay17 etc. (#9279 )
2020-10-02 17:32:45 +02:00
Theo Arends
d07fa4b492
Change A4988 optional microstep pin selection
2020-10-02 17:09:09 +02:00
Theo Arends
330109d67c
Add optional support for Orno WE517
...
Add optional support for Orno WE517-Modbus energy meter by Maxime Vincent (#9353 )
2020-10-02 16:37:43 +02:00
Theo Arends
6585fc07e8
Change MAX31865 driver to support up to 6 thermocouples
...
Change MAX31865 driver to support up to 6 thermocouples selected by ``MX31865 CS`` instead of ``SSPI CS`` (#9103 )
2020-10-02 16:11:13 +02:00
Theo Arends
72d561e9be
Change new IR Raw compact format ( #9444 )
2020-10-02 14:35:11 +02:00
Theo Arends
dcb0b68a21
Merge branch 'development' into dev-gpio16
2020-10-02 12:24:34 +02:00
Theo Arends
dd95b4a8cd
Bump dev version to 9.0.0.1
2020-10-02 12:22:01 +02:00
Theo Arends
c6115a3516
Update changelog and releasenotes
2020-09-30 15:44:37 +02:00
Theo Arends
7b567d23ea
Force rebuild
2020-09-29 14:43:11 +02:00
Theo Arends
5cf40fc059
Add support for VL53L1X time of flight sensor
...
Add support for VL53L1X time of flight sensor by Johann Obermeier
2020-09-29 11:27:53 +02:00
Theo Arends
b95a193711
Update changelog
2020-09-27 12:57:49 +02:00
Theo Arends
2b160912f5
Fix Shelly 2.5 higher temperature
...
Fix Shelly 2.5 higher temperature regression from 8.2.0.1 (#7991 )
2020-09-24 12:07:23 +02:00
Theo Arends
2bf98839e8
Update changelog and release notes
2020-09-22 11:47:41 +02:00
Theo Arends
afd197d493
Add command ``SetOption111 1``
...
Add command ``SetOption111 1`` to enable frequency output for buzzer GPIO (#8994 )
2020-09-15 11:44:09 +02:00
Theo Arends
26e041ab6e
Fix reset BMP sensors
...
Fix reset BMP sensors when executing command ``SaveData`` and define USE_DEEPSLEEP enabled (#9300 )
2020-09-14 12:26:32 +02:00
Theo Arends
9aa18c23f0
Add support for MLX90640
...
Add support for MLX90640 IR array temperature sensor by Christian Baars
2020-09-14 11:49:33 +02:00
Theo Arends
0e5c1c31ef
Update RELEASENOTES.md
2020-09-09 12:44:30 +02:00
Theo Arends
05c153c7b1
Update change log
2020-09-09 11:22:34 +02:00
Theo Arends
5176e3ab02
Bump version to 8.5.0.1
2020-09-07 14:54:31 +02:00
Theo Arends
201bad3eb0
Prep release 8.5
2020-09-06 18:41:39 +02:00
Theo Arends
77375b3d9c
Change thehackbox.org to ota.tasmota.com
2020-08-29 17:50:44 +02:00
Theo Arends
0f1e4fc917
Add command ``PowerDelta1`` to ``PowerDelta3``
...
- Bump version to 8.4.0.3
- Add command ``PowerDelta1`` to ``PowerDelta3`` to trigger on up to three phases (#9134 )
2020-08-23 18:29:16 +02:00
Theo Arends
4724fa2c49
Add support for DYP ME007
...
Add support for DYP ME007 ultrasonic distance sensor by Janusz Kostorz (#9113 )
2020-08-17 16:25:24 +02:00
Theo Arends
731ca297b0
Add better config corruption recovery
...
- Add better config corruption recovery (#9046 )
- Remove support for 1-step upgrade from versions before 6.6.0.11 to versions after 8.4.0.1
2020-08-13 13:04:28 +02:00
Theo Arends
f268697e54
Add command ``Restart 2`` to halt system
...
Add command ``Restart 2`` to halt system. Needs hardware reset or power cycle to restart (#9046 )
2020-08-10 16:19:44 +02:00
Theo Arends
ce388c799f
Add ESP32 Analog input support for GPIO32 to GPIO39
2020-08-04 16:33:05 +02:00
Theo Arends
1d990ad091
Fix ESP32 PWM range
2020-08-03 11:52:25 +02:00
Theo Arends
70c7f38a1f
Release 8.4.0
2020-07-29 16:58:07 +02:00
Theo Arends
ba3856d900
Change IRRemoteESP8266 library
...
Change IRRemoteESP8266 library from v2.7.6 to v2.7.8.10, fixing Samsung and Pioneer protocols (#8938 )
2020-07-29 14:44:45 +02:00
Theo Arends
69e252b7d7
Prep release 8.4.0
2020-07-29 10:31:38 +02:00
Theo Arends
b1f98f5711
Add tasmota-zbbridge support
2020-07-28 09:25:48 +02:00
Theo Arends
3acae81fc0
Change Domoticz commands prefix from ``Domoticz`` to ``Dz``
...
- Change Domoticz commands prefix from ``Domoticz`` to ``Dz``
- Add command ``DzSend<type> <index>,<value1(;value2)|state>`` to send values or state to Domoticz
2020-07-24 15:30:21 +02:00
Theo Arends
72e3765a55
Add command (``S``)``SerialSend6`` \<comma seperated values\>
...
Add command (``S``)``SerialSend6`` \<comma seperated values\> (#8937 )
2020-07-21 12:42:18 +02:00
Theo Arends
eb4164e713
Update RELEASENOTES.md
2020-07-21 11:03:03 +02:00