Commit Graph

86 Commits

Author SHA1 Message Date
Theo Arends f7c38f24f3 6.1.1.14 Add boot loop detection
Add boot loop detection and try to fix
2018-08-30 14:27:33 +02:00
Theo Arends 6a5c0d29e8 6.1.1.9 - Fixes and Additions
6.1.1.9
 * Allow user override of define MAX_RULE_TIMERS (#3561)
 * Allow user override of define MAX_RULE_VARS
 * Add GPIO options ButtonXn, SwitchXn and CounterXn to select INPUT mode instead of INPUT_PULLUP (#2525)
 * Fix OtaMagic when file path contains a dash (-) (#3563)
2018-08-23 16:05:51 +02:00
Theo Arends d08cefb0df Rewrite BME680 driver
Rewrite BME680 driver now using latest Bosch BME680 library (#2969)
2018-07-04 18:41:00 +02:00
Theo Arends 8f60a88a20 Add support for BlitzWolf BW-SHP2
Add support for BlitzWolf BW-SHP2 (and Homecube, Gosund SP1) Energy
Monitoring Smart Socket (#2223)
2018-07-02 14:25:02 +02:00
Theo Arends d3d876f030 Add Sonoff iFan02 support
Add support for Sonoff iFan02 as module 44 introducing command FanSpeed
0..3 (#2839)
2018-07-01 15:06:44 +02:00
Theo Arends 0fc019e418 Initial Sonoff iFan02 support
Initial Sonoff iFan02 support (#2839)
2018-06-30 18:50:10 +02:00
Theo Arends 03ae4098b5 Add support for Sonoff S26 Smart Socket
Add support for Sonoff S26 Smart Socket (#2808)
2018-06-29 13:48:19 +02:00
Theo Arends 3e96e04690 Add experimental (untested) TM1638 support
Add experimental (untested) TM1638 switch support (#2226)
2018-06-28 17:40:37 +02:00
Theo Arends 6e9602418d v6.0.0b - Support up to 8 switches
6.0.0b
* Change number of switches from 4 to 8 (#2885, #3086)
2018-06-28 14:28:14 +02:00
Theo Arends 6cb3f7f06b Add Eastron SDM630 energy meter
5.14.0a
 * Add Eastron SDM630 energy meter (#2735)
2018-05-16 10:07:41 +02:00
Theo Arends f7ecc99209 Add Eastron SDM120 energy meter
5.13.1a
* Add Eastron SDM120 energy meter (#2694)
2018-05-11 14:44:00 +02:00
Theo Arends 8fea3e49a8 5.12.0m - Changes and Fixes
5.12.0m
* Remove sonoff-xxl
* Add sonoff-classic, sonoff-allsensors and sonoff-knx
* Add some coloring to important web buttons
* Add user selectable defines for Sunrise/set Dawn option (#2378)
* Add GPIO_User to GPIO02 for all Sonoff T1 (#2524)
2018-04-23 11:37:46 +02:00
Theo Arends a8b83aa036 Add support for Sonoff Pow R2 (#2340)
5.12.0m
* Add support for Sonoff Pow R2 (#2340)
2018-04-20 16:55:27 +02:00
Theo Arends 2743c35462 Add support for HC-SR04
5.12.0m
* Add support for sensor HC-SR04 ultrasonic (#113, #1964, #2444)
2018-04-20 14:31:09 +02:00
Theo Arends 76f699bf02 Remove debug code and do some clean-up
Remove debug code and set H801 GPIO0 to GPIO_USER (#1503)
2018-04-19 22:29:09 +02:00
Theo Arends ed2e8d8934 Add PWM4/5 to H801 template (#1503) 2018-04-13 10:33:17 +02:00
Theo Arends f205a68d43 Add GPIO13 to Sonoff Dev (#2341) 2018-04-03 16:45:33 +02:00
Theo Arends 687f96f843 v5.12.0h - Change to default PWM Color/Dimmer
5.12.0h
 * Add support for Zengge WF017 PWM Led strip controller
(#2202)
 * Change default option SetOption15 from 0 to 1 providing
better initial PWM experience
2018-03-21 09:27:05 +01:00
Theo Arends 2ba4d6fb47 v5.12.0h - Add Serial Bridges
5.12.0h
 * Add support for Software Serial bridge using commands
SerialDelimiter, SBaudrate and SSerialSend. Supports 8N1 and text only
(#2190)
 * Add support for Hardware Serial bridge using commands
SerialDelimiter, Baudrate and SerialSend. Supports 8N1 and text only
(#2182)
2018-03-20 14:31:11 +01:00
Theo Arends a16e2316b3 v5.12.0d - Add support for Nova Fitness SDS011
5.12.0d
 * Add support for Nova Fitness SDS011 and possibly SDS021
particle concentration sensor (#2070)
2018-03-03 15:28:30 +01:00
arendst 5c60979682 v5.12.0b
5.12.0b
 * Add Webserver upload preflight request support (#1927)
 * Add
Home Assistant clear other device (#1931)
2018-02-16 17:35:51 +01:00
arendst cdacd3ed3a v5.12.0b - Add optional formatting
5.12.0b
 * Add serial debug info
 * Add optional usage of %d or %X
suffices in MQTT client to append chipid (#1871)
 * Add optional usage
of %d or %X suffices in MQTT topic to append chipid (#1871)
 * Add
optional usage of %d or %04d in ota url to be replaced with chipid
(#1871)
 * Add user configurable serial GPIOs to MagicHome and Arilux
modules (#1887)
2018-02-13 14:30:30 +01:00
arendst 12f13a37b9 v5.11.1i - Add S31 support and some fixes
5.11.1i
 * Update TasmotaSerial library to 1.1.0
 * Rename commands
HlwPCal, HlwUCal and HlwICal to PowerCal, VoltageCal and CurrentCal to
be used for both Pow and S31 calibration
 * Rename commands HlwPSet,
HlwUSet and HlwISet to PowerSet, VoltageSet and CurrentSet to be used
for both Pow and S31 calibration
 * Add support for Sonoff S31 Smart
Socket with Power Consumption Detection (#1626)
 * Fix IRReceive Data
value (#1663)
 * Fix compiler warnings (#1774)
2018-02-03 23:25:05 +01:00
arendst 88429fb24c Faster console output. Support longer sensor names 2018-02-01 16:18:00 +01:00
arendst 2cac51619c v5.11.1e Fixes new commands
5.11.1e
 * Replaced command Ina219Mode with command Sensor13
 * Add
command Sensor15 2 to start MHZ19(B) Zero Point Calibration
 * Add
chunked webserver pages for large pages saving memory
 * Fix Non-English
JSON temperature unit attachement
 * Fix Sonoff Pow Energy Today and
Energy Total reading after restart (#1648)
 * Rewrite function pointers
to save code space and memory (#1683)
 * Add option define
HOME_ASSISTANT_DISCOVERY_ENABLE in user_config.h (#1685)
 * Fix SOnoff
Pow Energy Period roll-over (#1688)
2018-01-24 17:31:20 +01:00
arendst 1538d30c96 v5.11.1c - Fixes and experimental Hass Discovery
5.11.1c
 * Make command color parameter input less strict to ease Hass
support
 * Add ColorTemperature to light status message
 * Change
PubSubClient.h define MQTT_MAX_PACKET_SIZE from 512 to 1000 for Hass
support
 * Make define MESSZ dependent on PubSubClient.h define
MQTT_MAX_PACKET_SIZE
 * Fix logging line length around 400 characters
 *
Change module name Wemos D1 mini into Generic (#1220)
 * Revert HTML
change from width=100% to style=width:100% supporting HTML5 (#1358)
 *
Add experimental (still Hass python exceptions) Home Assistant Discovery
for switch and light to be enabled by command SetOption19 1 (#1534)
 *
Updated French Translation (#1561)
 * Fix DS18B20 temperature JSON
decimal dot (#1561)
 * Add Spanish language file (#1589)
 * Update
Italian Language file (#1594)
 * Consolidate WIFI_MANAGER_SEC into
WIFI_CONFIG_SEC (#1616)
 * Fix Energy JSON message (#1621)
2018-01-18 16:19:28 +01:00
arendst aed070cc90 Add automagic two step OTA and Chinese locale
5.11.1a
 * Add automagic two step Web server OTA upgrade using
filename-minimal image if OTA free space is too small
 * Add chinese
language file (#1551)
2018-01-10 14:10:25 +01:00
arendst c1083c6e1c v5.11.0a
Align with master
2018-01-07 14:56:23 +01:00
arendst 349230de72 v5.10.0i - Fixes and rearrangements
5.10.0i
 * Add device function pointers
 * Moved Command and JSON
English language defines to one file (i18n.h)
 * Update it-IT.h language
file (#1449)
 * Fix Wemo and Hue emulation by adding M-Search response
delay (#1486)
2018-01-05 12:26:19 +01:00
arendst 67d8fa0d64 v5.10.0c
5.10.0c
 * Consolidate device serial (MH-Z19, SenseAir and Pzem004T)
into TasmotaSerial library
 * Consolidate PWM device recognition
 * Fix
Wemo Emulation (#1357)
 * Add support for Arilux LC06 (#1414)
2017-12-25 17:41:12 +01:00
arendst 7723d52453 Add support for SenseAir S8 CO2 sensor
* Add support for SenseAir S8 CO2 sensor to be enabled with define
USE_SENSEAIR in user_config.h
 * Add support for Domoticz Air Quality
sensor to be used by MH-Z19(B) and SenseAir sensors
2017-12-22 14:55:24 +01:00
arendst f9ce916e0b v5.10.0b - Add PZEM004T support
5.10.0b
 * Change Sonoff Pow Energy MQTT data JSON message and
consolidate Status 8 into Status 10
 * Add optional support for PZEM004T
energy sensor to enable with define USE_PZEM004T in user_config.h (#614)
2017-12-16 15:51:45 +01:00
arendst 6331ee7c8f Add experimental MH-Z19(B) support
Add (experimental) support for sensor MH-Z19(B) to be enabled with
define USE_MHZ19 in user_config.h (#561, #1248)
2017-12-04 17:25:06 +01:00
arendst 253d60fd2b Add experimental SI7021 support
* Add (experimental) support for iTead SI7021 temperature and humidity
sensor (#735)
 * Change ADS1115 default voltage range from +/-2V to
+/-6V (#1289)
2017-12-03 14:06:15 +01:00
arendst c102fc5f9e v5.10.0a - Fixes ADS1115 and Sonoff Dual R2
5.10.0a
 * Add (experimental) support for sensor SHT3x
 * Change ADS1115
default voltage range from +/-2V to +/-4V (#1289)
 * Add multipress
support and more user configurable options to Sonoff Dual R2 (#1291)
2017-12-02 12:40:33 +01:00
arendst 5731c975e4 Revert "v5.10.0a - Fixes ADS1115 and Sonoff Dual R2"
This reverts commit 73547c8bd7.
2017-12-02 12:38:50 +01:00
arendst 73547c8bd7 v5.10.0a - Fixes ADS1115 and Sonoff Dual R2
5.10.0a
 * Add (experimental) support for sensor SHT3x
 * Change ADS1115
default voltage range from +/-2V to +/-4V (#1289)
 * Add multipress
support and more user configurable options to Sonoff Dual R2 (#1291)
2017-12-02 12:38:29 +01:00
arendst 0f531e24e5 v5.9.1j - Add Dual R2, Rewrite DS18x20 and fixes
5.9.1j
 * Revert changes to xsns_05_ds18x20.ino and rename to
xsns_05_ds18x20_legacy.ino still needing library OneWire and providing
legacy JSON message:
 *
"DS18x20":{"DS1":{"Type":"DS18B20","Address":"284CC48E04000079","Temperature":19.5},"DS2":{"Type":"DS18B20","Address":"283AC28304000052","Temperature":19.6}}

* Add new xdrv_05_ds18x20.ino free from library OneWire and add the
following features:
 *  Add support for DS1822
 *  Add forced setting of
12-bit resolution for selected device types (#1222)
 *  Add read
temperature retry counter (#1215)
 *  Fix lost sensors by performing
sensor probe at restart only thereby removing dynamic sensor probe
(#1215)
 *  Fix sensor address sorting using ascending sort on sensor
type followed by sensor address
 *  Rewrite JSON resulting in shorter
message allowing more sensors in default firmware image:
 *
"DS18B20-1":{"Id":"00000483C23A","Temperature":19.5},"DS18B20-2":{"Id":"0000048EC44C","Temperature":19.6}

* Add additional define in user_config.h to select either single sensor
(defines disabled), new multi sensor (USE_DS18X20) or legacy multi
sensor (USE_DS18X20_LEGACY)
 * Add support for Sonoff Dual R2 (#1249)
 *
Fix ADS1115 detection (#1258)
2017-11-27 17:46:51 +01:00
arendst 8366ee116a v5.9.1g - Add Pow Energy set and Clock tuning
5.9.1g
 * Fix typo ALIRFRCV into ARIRFRCV
 * Add nicer clock support for
larger hand widths
 * Add better clock support for different pixel
counts (#1226)
 * Remove command EnergyReset 1..3
 * Add commands
EnergyReset1 0..42500, EnergyReset2 0..42500 and EnergyReset3
0..42500000
 *  to (Re)set Energy Today, Yesterday or Total respectively
in Wh (#406, #685, #1202)
 * Add SettingsSaveAll routine to command
SaveData to be used before controlled power down (#1202)
2017-11-21 16:06:51 +01:00
arendst db4a3a4a1e v5.9.1d - Add Arilux LC11 support
5.9.1d
 * Add support for Arilux LC11 (CLearing RF home code when
selecting no Arilux module)
 * Add fixed color options 1..12 to command
Color
 * Add + (plus) and - (minus) to commands Dimmer (+10/-10), Speed
and Scheme
2017-11-15 23:07:45 +01:00
arendst ae12b958cd v5.8.0p - Prep for release
5.8.0p
 * Fix initial PwmFrequency and PwmRange
 * Add support for
Arilux AL-LC01 RGB Led controller (#370)
 * Add light turn Off Fade
(#925)
 * Change IrSend Panasonic command to IrSend
{"Protocol":"Panasonic", "Bits":16388, "Data":<Panasonic data>}
 *
where 16388 is 0x4004 hexadecimal (#1014)
2017-10-26 16:33:33 +02:00
arendst 1296432da2 v5.8.0n - Add language, device and clock commands
5.8.0n
 * Fix minimum TelePeriod of 10 seconds set by web page
 * Shrink
information web page by 1k code space
 * Removed Arduino IDE version too
low warning as it interferes with platformio.ini platform =
espressif8266_stage
 * Add commands Color2, Color3, Color4, Width2,
Width3, Width4 and SetOption16 to set Ws2812 Clock parameters (#1019)
 *
Add Polish language file (#1044, #1047)
 * Add support for KMC 70011
Power Monitoring Smart Plug (#1045)
 * Corrected German language file
(#1054)
2017-10-23 12:18:15 +02:00
arendst fc89330056 v5.8.0m - Rewrite and Additions
5.8.0m
 * Rewrite code (partly) using Google C++ Style Guide
(https://google.github.io/styleguide/cppguide.html)
 * Allow empty
MqttHost name by using option 0
 * Allow Mqtt server mDNS lookup only
when MqttHost name is empty (#1026)
 * Change Ws2812 clock with more
flexible version (#1019)
 * Add German language file (#1022)
 * Support
connecting to MQTT brokers without userid and/or password (#1023)
 * Add
commands PwmRange 1,255..1023 and PwmFrequency 1,100..4000 (#1025)
2017-10-18 18:22:34 +02:00
arendst 66d9ff14ac v5.8.0l - Update module config webpage
5.8.0l
* Update HTML/CSS to enable nicer form field entry
* Fix inverted relay status after restart or power on as regression from
5.8.0d (#909)
* Add send protocol Panasonic to IRsend (#1014)
* Fix relay power control when light power control is also configured as
regression from 5.8.0 (#1016)
2017-10-14 11:26:49 +02:00
arendst 804bd8fb53 v5.8.0k - Add support for 8 relays
5.8.0k
 * Add support for up to 8 relays (#995)
 * Fix Blocked Loop when
erasing large flash using command reset 2 (#1002)
2017-10-12 11:29:40 +02:00
arendst 3bc7dd4e83 v5.8.0h - Add IR Receive
5.8.0h
 * Rename command IRRemote to IRSend (#956)
 * Add IR Receiver
support. Disable in user_config.h (#956)
 * Change default PWM
assignment for Witty Cloud to support optional Color/Dimmer control
(#976)
 *   GPIO12 (Green) from GPIO_PWM4 to GPIO_PWM2
 *   GPIO13
(Blue)  from GPIO_PWM5 to GPIO_PWM3
 *   GPIO15 (Red)   from GPIO_PWM3
to GPIO_PWM1
2017-10-06 17:28:00 +02:00
arendst c82fe7f46e v5.8.0f - Add inverted PWM support
5.8.0f
 * Set all saved power settings to Off when SetOption0
(SaveState) = 0 (#955)
 * Allow PWM initialization after restart (#955)

* Add support for inverted PWM (#960)
2017-10-04 17:29:49 +02:00
arendst 12af1af01b v5.8.0e - SnfBrdge RF code as Domoticz Counter
5.8.0e
 * Add Domoticz counter sensor to Sonoff Bridge representing
Received RF code (#943)
 * Add support for Luani HVIO board
(https://luani.de/projekte/esp8266-hvio/) (#953)
2017-10-02 16:45:03 +02:00
arendst 48faeaa2ce v5.8.0d - Add Color/Dimmer control to PWM
5.8.0d
 * Remove previous GPIO configuration when another module is
selected
 * Fix inverted relay power on state (#909)
 * Change default
PWM assignments for H801 RGB(CW) led controller to support optional
Color/Dimmer control
 *   GPIO04 (W2)    from GPIO_PWM2 to GPIO_USER to
be user configurable for GPIO_PWM5 (second White - Warm if W1 is Cold)

*   GPIO12 (Blue)  GPIO_PWM3 no change
 *   GPIO13 (Green) from
GPIO_PWM4 to GPIO_PWM2
 *   GPIO14 (W1)    from GPIO_PWM1 to GPIO_USER
to be user configurable for GPIO_PWM4 (first White - Cold or Warm)
 *
GPIO15 (Red)   from GPIO_PWM5 to GPIO_PWM1
 * Change default PWM
assignments for MagicHome RGB(W) led controller to support optional
Color/Dimmer control
 *   GPIO05 (Green) from GPIO_PWM4 to GPIO_PWM2
 *
GPIO12 (Blue)  from GPIO_PWM5 to GPIO_PWM3
 *   GPIO13 (White) GPIO_USER
to be user configurable for GPIO_PWM4 (White - Cold or Warm)
 *   GPIO14
(Red)   from GPIO_PWM3 to GPIO_PWM1
 * Add command SetOption15 0
(default) for command PWM control or SetOption15 1 for commands
Color/Dimmer control to PWM RGB(CW) leds (#941)
2017-10-01 14:32:36 +02:00
arendst 107b746083 v5.8.0c
5.8.0c
 * Add warning to webpage when USE_MINIMAL is selected (#929)
 *
Fix compile error when DOMOTICZ_UPDATE_TIMER is not defined (#930)
 *
Fix alignment of web page items in some browsers (#935)
 * Add smoother
movement of hour hand in WS2812 led clock (#936)
 * Add support for
Magic Home RGBW Led controller (#940)
2017-09-30 13:32:53 +02:00