Tasmota/tasmota/xdrv_04_light.ino

/*
  xdrv_04_light.ino - PWM, WS2812 and sonoff led support for Tasmota

  Copyright (C) 2020  Theo Arends

  This program is free software: you can redistribute it and/or modify
  it under the terms of the GNU General Public License as published by
  the Free Software Foundation, either version 3 of the License, or
  (at your option) any later version.

  This program is distributed in the hope that it will be useful,
  but WITHOUT ANY WARRANTY; without even the implied warranty of
  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  GNU General Public License for more details.

  You should have received a copy of the GNU General Public License
  along with this program.  If not, see <http://www.gnu.org/licenses/>.
*/

#ifdef USE_LIGHT
/*********************************************************************************************\
 * PWM, WS2812, Sonoff B1, AiLight, Sonoff Led and BN-SZ01, H801, MagicHome and Arilux
 *
 * light_type  Module     Color  ColorTemp  Modules
 * ----------  ---------  -----  ---------  ----------------------------
 *  0          -                 no         (Sonoff Basic)
 *  1          PWM1       W      no         (Sonoff BN-SZ)
 *  2          PWM2       CW     yes        (Sonoff Led)
 *  3          PWM3       RGB    no         (H801, MagicHome and Arilux LC01)
 *  4          PWM4       RGBW   no         (H801, MagicHome and Arilux)
 *  5          PWM5       RGBCW  yes        (H801, Arilux LC11)
 *  9          reserved          no
 * 10          reserved          yes
 * 11          +WS2812    RGB    no         (One WS2812 RGB or RGBW ledstrip)
 * 12          AiLight    RGBW   no
 * 13          Sonoff B1  RGBCW  yes
 *
 * light_scheme  WS2812  3+ Colors  1+2 Colors  Effect
 * ------------  ------  ---------  ----------  -----------------
 *  0            yes     yes        yes         Color On/Off
 *  1            yes     yes        yes         Wakeup light
 *  2            yes     yes        no          Color cycle RGB
 *  3            yes     yes        no          Color cycle RBG
 *  4            yes     yes        no          Random RGB colors
 *  5            yes     no         no          Clock
 *  6            yes     no         no          Incandescent
 *  7            yes     no         no          RGB
 *  8            yes     no         no          Christmas
 *  9            yes     no         no          Hanukkah
 * 10            yes     no         no          Kwanzaa
 * 11            yes     no         no          Rainbow
 * 12            yes     no         no          Fire
 *
\*********************************************************************************************/

/*********************************************************************************************\
 *
 * Light management has been refactored to provide a cleaner class-based interface.
 * Also, now all values are stored as integer, no more floats that could generate
 * rounding errors.
 *
 * Two singletons are now used to control the state of the light.
 *  - light_state (LightStateClass) stores the color / white temperature and
 *    brightness. Use this object to READ only.
 *  - light_controller (LightControllerClass) is used to change light state
 *    and adjust all Settings and levels accordingly.
 *    Always use this object to change light status.
 *
 * As there have been lots of changes in light control, here is a summary out
 * the whole flow from setting colors to drving the PMW pins.
 *
 * 1.  To change colors, always use 'light_controller' object.
 *     'light_state' is only to be used to read current state.
 *  .a For color bulbs, set color via changeRGB() or changeHS() for Hue/Sat.
 *     Set the overall brightness changeBri(0..255) or changeDimmer(0..100%)
 *     RGB and Hue/Sat are always kept in sync. Internally, RGB are stored at
 *     full range (max brightness) so that when you reduce brightness and
 *     raise it back again, colors don't change due to rounding errors.
 *  .b For white bulbs with Cold/Warm colortone, use changeCW() or changeCT()
 *     to change color-tone. Set overall brightness separately.
 *     Color-tone temperature can range from 153 (Cold) to 500 (Warm).
 *     SetOption82 can expand the rendering from 200-380 due to Alexa reduced range.
 *     CW channels are stored at full brightness to avoid rounding errors.
 *  .c Alternatively, you can set all 5 channels at once with changeChannels(),
 *     in this case it will also set the corresponding brightness.
 *
 * 2.a After any change, the Settings object is updated so that changes
 *     survive a reboot and can be stored in flash - in saveSettings()
 *  .b Actual channel values are computed from RGB or CT combined with brightness.
 *     Range is still 0..255 (8 bits) - in getActualRGBCW()
 *  .c The 5 internal channels RGBWC are mapped to the actual channels supported
 *     by the light_type: in calcLevels()
 *     1 channel  - 0:Brightness
 *     2 channels - 0:Coldwhite 1:Warmwhite
 *     3 channels - 0:Red 1:Green 2:Blue
 *     4 chennels - 0:Red 1:Green 2:Blue 3:White
 *     5 chennels - 0:Red 1:Green 2:Blue 3:ColdWhite 4:Warmwhite
 *
 * 3.  In LightAnimate(), final PWM values are computed at next tick.
 *  .a If color did not change since last tick - ignore.
 *  .b Extend resolution from 8 bits to 10 bits, which makes a significant
 *     difference when applying gamma correction at low brightness.
 *  .c Apply Gamma Correction if LedTable==1 (by default).
 *     Gamma Correction uses an adaptative resolution table from 11 to 8 bits.
 *  .d For Warm/Cold-white channels, Gamma correction is calculated in combined mode.
 *     Ie. total white brightness (C+W) is used for Gamma correction and gives
 *     the overall light power required. Then this light power is split among
 *     Wamr/Cold channels.
 *  .e Gamma correction is still applied to 8 bits channels for compatibility
 *     with other non-PMW modules.
 *  .f Apply color balance correction from rgbwwTable[].
 *     Note: correction is done after Gamma correction, it is meant
 *     to adjust leds with different power
 *  .g If rgbwwTable[4] is zero, blend RGB with White and adjust the level of
 *     White channel according to rgbwwTable[3]
 *  .h Scale ranges from 10 bits to 0..PWMRange (by default 1023) so no change
 *     by default.
 *  .i Apply port remapping from Option37
 *  .j Invert PWM value if port is of type PMWxi instead of PMWx
 *  .k Apply PWM value with analogWrite() - if pin is configured
 *
\*********************************************************************************************/

#define XDRV_04              4
// #define DEBUG_LIGHT

enum LightSchemes { LS_POWER, LS_WAKEUP, LS_CYCLEUP, LS_CYCLEDN, LS_RANDOM, LS_MAX };

const uint8_t LIGHT_COLOR_SIZE = 25;   // Char array scolor size

const char kLightCommands[] PROGMEM = "|"  // No prefix
  D_CMND_COLOR "|" D_CMND_COLORTEMPERATURE "|" D_CMND_DIMMER "|" D_CMND_DIMMER_RANGE "|" D_CMND_LEDTABLE "|" D_CMND_FADE "|"
  D_CMND_RGBWWTABLE "|" D_CMND_SCHEME "|" D_CMND_SPEED "|" D_CMND_WAKEUP "|" D_CMND_WAKEUPDURATION "|"
  D_CMND_WHITE "|" D_CMND_CHANNEL "|" D_CMND_HSBCOLOR
#ifdef USE_LIGHT_PALETTE
  "|" D_CMND_PALETTE
#endif  // USE_LIGHT_PALETTE
#ifdef USE_DGR_LIGHT_SEQUENCE
  "|" D_CMND_SEQUENCE_OFFSET
#endif  // USE_DGR_LIGHT_SEQUENCE
   "|UNDOCA" ;

void (* const LightCommand[])(void) PROGMEM = {
  &CmndColor, &CmndColorTemperature, &CmndDimmer, &CmndDimmerRange, &CmndLedTable, &CmndFade,
  &CmndRgbwwTable, &CmndScheme, &CmndSpeed, &CmndWakeup, &CmndWakeupDuration,
  &CmndWhite, &CmndChannel, &CmndHsbColor,
#ifdef USE_LIGHT_PALETTE
  &CmndPalette,
#endif  // USE_LIGHT_PALETTE
#ifdef USE_DGR_LIGHT_SEQUENCE
  &CmndSequenceOffset,
#endif  // USE_DGR_LIGHT_SEQUENCE
  &CmndUndocA };

// Light color mode, either RGB alone, or white-CT alone, or both only available if ct_rgb_linked is false
enum LightColorModes {
  LCM_RGB = 1, LCM_CT = 2, LCM_BOTH = 3 };

struct LRgbColor {
  uint8_t R, G, B;
};
const uint8_t MAX_FIXED_COLOR = 12;
const LRgbColor kFixedColor[MAX_FIXED_COLOR] PROGMEM =
  { 255,0,0, 0,255,0, 0,0,255, 228,32,0, 0,228,32, 0,32,228, 188,64,0, 0,160,96, 160,32,240, 255,255,0, 255,0,170, 255,255,255 };

struct LWColor {
  uint8_t W;
};
const uint8_t MAX_FIXED_WHITE = 4;
const LWColor kFixedWhite[MAX_FIXED_WHITE] PROGMEM = { 0, 255, 128, 32 };

struct LCwColor {
  uint8_t C, W;
};
const uint8_t MAX_FIXED_COLD_WARM = 4;
const LCwColor kFixedColdWarm[MAX_FIXED_COLD_WARM] PROGMEM = { 0,0, 255,0, 0,255, 128,128 };

// CT min and max
const uint16_t CT_MIN = 153;          // 6500K
const uint16_t CT_MAX = 500;          // 2000K
// Ranges used for Alexa
const uint16_t CT_MIN_ALEXA = 200;    // also 5000K
const uint16_t CT_MAX_ALEXA = 380;    // also 2600K

// New version of Gamma correction compute
// Instead of a table, we do a multi-linear approximation, which is close enough
// At low levels, the slope is a bit higher than actual gamma, to make changes smoother
// Internal resolution is 10 bits.

typedef struct gamma_table_t {
  uint16_t to_src;
  uint16_t to_gamma;
} gamma_table_t;

const gamma_table_t gamma_table[] = {   // don't put in PROGMEM for performance reasons
  {    1,      1 },
  {    4,      1 },
  {  209,     13 },
  {  312,     41 },
  {  457,    106 },
  {  626,    261 },
  {  762,    450 },
  {  895,    703 },
  { 1023,   1023 },
  { 0xFFFF, 0xFFFF }          // fail-safe if out of range
};

// simplified Gamma table for Fade, cheating a little at low brightness
const gamma_table_t gamma_table_fast[] = {
  {   384,    192 },
  {   768,    576 },
  {  1023,   1023 },
  { 0xFFFF, 0xFFFF }          // fail-safe if out of range
};

// For reference, below are the computed gamma tables, via ledGamma()
// for 8 bits output:
//   0,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,
//   1,  1,  1,  1,  1,  1,  1,  1,  1,  2,  2,  2,  2,  2,  2,  2,
//   2,  2,  2,  2,  2,  2,  2,  2,  2,  2,  3,  3,  3,  3,  3,  3,
//   3,  3,  3,  3,  3,  3,  4,  4,  4,  4,  5,  5,  5,  6,  6,  6,
//   6,  7,  7,  7,  7,  8,  8,  8,  9,  9,  9,  9, 10, 10, 10, 11,
//  11, 12, 12, 12, 13, 13, 14, 14, 15, 15, 16, 16, 17, 17, 17, 18,
//  18, 19, 19, 20, 20, 21, 21, 21, 22, 22, 23, 23, 24, 24, 25, 25,
//  25, 26, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 36, 37, 38,
//  39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 50, 51, 52, 53,
//  54, 55, 56, 57, 58, 59, 60, 61, 61, 62, 63, 64, 65, 67, 68, 69,
//  71, 72, 73, 75, 76, 78, 79, 80, 82, 83, 85, 86, 87, 89, 90, 91,
//  93, 94, 95, 97, 98,100,101,102,104,105,107,108,109,111,112,114,
// 116,118,120,122,124,125,127,129,131,133,135,137,139,141,143,144,
// 146,148,150,152,154,156,158,160,162,164,166,168,170,171,173,175,
// 178,180,183,185,188,190,193,195,198,200,203,205,208,210,213,215,
// 218,220,223,225,228,230,233,235,238,240,243,245,248,250,253,255
//
// and for 10 bits output:
//    0,   1,   1,   1,   2,   2,   2,   2,   3,   3,   3,   3,   4,   4,   4,   4,
//    5,   5,   5,   5,   5,   6,   6,   6,   6,   7,   7,   7,   7,   8,   8,   8,
//    8,   8,   9,   9,   9,   9,  10,  10,  10,  10,  11,  11,  11,  11,  12,  12,
//   12,  12,  13,  13,  13,  14,  15,  16,  17,  18,  20,  21,  22,  23,  24,  25,
//   26,  27,  28,  29,  30,  31,  33,  34,  35,  36,  37,  38,  39,  40,  41,  43,
//   45,  47,  49,  50,  52,  54,  56,  58,  59,  61,  63,  65,  67,  68,  70,  72,
//   74,  76,  77,  79,  81,  83,  84,  86,  88,  90,  92,  93,  95,  97,  99, 101,
//  102, 104, 106, 110, 113, 117, 121, 124, 128, 132, 135, 139, 143, 146, 150, 154,
//  158, 162, 166, 169, 173, 177, 180, 184, 188, 191, 195, 199, 202, 206, 210, 213,
//  217, 221, 224, 228, 232, 235, 239, 243, 246, 250, 254, 257, 261, 267, 272, 278,
//  283, 289, 294, 300, 305, 311, 317, 322, 328, 333, 339, 344, 350, 356, 361, 367,
//  372, 378, 383, 389, 394, 400, 406, 411, 417, 422, 428, 433, 439, 444, 450, 458,
//  465, 473, 480, 488, 496, 503, 511, 518, 526, 534, 541, 549, 557, 564, 572, 579,
//  587, 595, 602, 610, 617, 627, 635, 642, 650, 657, 665, 673, 680, 688, 695, 703,
//  713, 723, 733, 743, 753, 763, 773, 783, 793, 803, 813, 823, 833, 843, 853, 863,
//  873, 883, 893, 903, 913, 923, 933, 943, 953, 963, 973, 983, 993,1003,1013,1023
//
// Output for Dimmer 0..100 values
//   0,  1,  2,  3,  3,  4,  4,  5,  5,  6,  7,  7,  8,  8,  9,
//  10, 10, 11, 12, 12, 13, 15, 17, 21, 23, 26, 28, 31, 34, 37,
//  40, 43, 49, 52, 58, 61, 67, 70, 76, 79, 84, 90, 93, 99,102,
// 110,117,128,135,146,158,166,177,184,195,202,213,221,232,239,
// 250,261,272,289,300,317,328,344,356,372,389,400,417,428,444,
// 458,480,496,518,534,557,579,595,617,635,657,673,695,713,743,
// 773,793,823,843,873,893,923,943,973,993,1023

struct LIGHT {
  uint32_t strip_timer_counter = 0;  // Bars and Gradient
  power_t power = 0;                      // Power<x> for each channel if SetOption68, or boolean if single light

  uint8_t entry_color[LST_MAX];
  uint8_t current_color[LST_MAX];
  uint8_t new_color[LST_MAX];
  uint8_t last_color[LST_MAX];
  uint8_t color_remap[LST_MAX];

  uint8_t wheel = 0;
  uint8_t random = 0;
  uint8_t subtype = 0;                    // LST_ subtype
  uint8_t device = 0;
  uint8_t old_power = 1;
  uint8_t wakeup_active = 0;             // 0=inctive, 1=on-going, 2=about to start, 3=will be triggered next cycle
  uint8_t fixed_color_index = 1;
  uint8_t pwm_offset = 0;                 // Offset in color buffer
  uint8_t max_scheme = LS_MAX -1;
  
  uint32_t wakeup_start_time = 0;

  bool update = true;
  bool pwm_multi_channels = false;        // SetOption68, treat each PWM channel as an independant dimmer
  bool virtual_ct = false;                // SetOption106, add a 5th virtual channel, only if SO106 = 1, SO68 = 0, Light is RGBW (4 channels), SO37 < 128

  bool     fade_initialized = false;      // dont't fade at startup
  bool     fade_running = false;
#ifdef USE_DEVICE_GROUPS
  uint8_t  last_scheme = 0;
  bool     devgrp_no_channels_out = false; // don't share channels with device group (e.g. if scheme set by other device)
#ifdef USE_DGR_LIGHT_SEQUENCE
  uint8_t  sequence_offset = 0;            // number of channel changes this light is behind the master
  uint8_t * channels_fifo;
#endif  // USE_DGR_LIGHT_SEQUENCE
#endif  // USE_DEVICE_GROUPS
#ifdef USE_LIGHT_PALETTE
  uint8_t  palette_count = 0;            // palette entry count
  uint8_t * palette;                     // dynamically allocated palette color array
#endif  // USE_LIGHT_PALETTE
  uint16_t fade_start_10[LST_MAX] = {0,0,0,0,0};
  uint16_t fade_cur_10[LST_MAX];
  uint16_t fade_end_10[LST_MAX];         // 10 bits resolution target channel values
  uint16_t fade_duration = 0;            // duration of fade in milliseconds
  uint32_t fade_start = 0;               // fade start time in milliseconds, compared to millis()

  uint16_t pwm_min = 0;                  // minimum value for PWM, from DimmerRange, 0..1023
  uint16_t pwm_max = 1023;               // maxumum value for PWM, from DimmerRange, 0..1023
} Light;

power_t LightPower(void)
{
  return Light.power;                     // Make external
}

uint8_t LightDevice(void)
{
  return Light.device;                    // Make external
}

static uint32_t min3(uint32_t a, uint32_t b, uint32_t c) {
  return (a < b && a < c) ? a : (b < c) ? b : c;
}

//
// LightStateClass
// This class is an abstraction of the current light state.
// It allows for b/w, full colors, or white colortone
//
// This class has 2 independant slots
// 1/ Brightness 0.255, dimmer controls both RGB and WC (warm-cold)
// 1/ RGB and Hue/Sat - always kept in sync and stored at full brightness,
//    i.e. R G or B are 255
//    briRGB specifies the brightness for the RGB slot.
//    If Brightness is 0, it is equivalent to Off (for compatibility)
//    Dimmer is Brightness converted to range 0..100
// 2/ White with colortone - or CW (Cold / Warm)
//    ct is 153..500 temperature (153=cold, 500=warm)
//    briCT specifies the brightness for white channel
//
// Dimmer (0.100) is automatically derived from brightness
//
// INVARIANTS:
// 1.  RGB components are always stored at full brightness and modulated with briRGB
//     ((R == 255) || (G == 255) || (B == 255))
// 2.  RGB and Hue/Sat are always kept in sync whether you use setRGB() or setHS()
// 3.  Warm/Cold white channels are always stored at full brightness
//     ((WW == 255) || (WC == 255))
// 4.  WC/WW and CT are always kept in sync.
//     Note: if you use setCT() then WC+WW == 255 (both channels are linked)
//     but if you use setCW() both channels can be set independantly
// 5.  If RGB or CT channels are deactivated, then corresponding brightness is zero
//     if (colot_tone == LCM_RGB) then briCT = 0
//     if (color_tone == LCM_CT)  then briRGB = 0
//     if (colot_tone == LCM_BOTH) then briRGB and briCT can have any values
//
// Note:  If you want the actual RGB, you need to multiply with Bri, or use getActualRGBCW()
// Note: all values are stored as unsigned integer, no floats.
// Note: you can query vaules from this singleton. But to change values,
//   use the LightController - changing this object will have no effect on actual light.
//
class LightStateClass {
  private:
    uint16_t _hue = 0;  // 0..359
    uint8_t  _sat = 255;  // 0..255
    uint8_t  _briRGB = 255;  // 0..255
    // dimmer is same as _bri but with a range of 0%-100%
    uint8_t  _r = 255;  // 0..255
    uint8_t  _g = 255;  // 0..255
    uint8_t  _b = 255;  // 0..255

    uint8_t  _subtype = 0;  // local copy of Light.subtype, if we need multiple lights
    uint16_t _ct = CT_MIN;  // 153..500, default to 153 (cold white)
    uint8_t  _wc = 255;  // white cold channel
    uint8_t  _ww = 0;    // white warm channel
    uint8_t  _briCT = 255;

    uint8_t  _color_mode = LCM_RGB; // RGB by default
    // the CT range below represents the rendered range,
    // This is due to Alexa whose CT range is 199..383
    // Hence setting Min=200 and Max=380 makes Alexa use the full range
    // Please note that you can still set CT to 153..500, but any
    // value below _ct_min_range or above _ct_max_range not change the CT
    uint16_t _ct_min_range = CT_MIN;   // the minimum CT rendered range
    uint16_t _ct_max_range = CT_MAX;   // the maximum CT rendered range

  public:
    LightStateClass() {
      //AddLog_P2(LOG_LEVEL_DEBUG_MORE, "LightStateClass::Constructor RGB raw (%d %d %d) HS (%d %d) bri (%d)", _r, _g, _b, _hue, _sat, _bri);
    }

    void setSubType(uint8_t sub_type) {
      _subtype = sub_type;    // set sub_type at initialization, shoudln't be changed afterwards
    }

    // This function is a bit hairy, it will try to match the rerquired
    // colormode with the features of the device:
    //   LST_NONE:      LCM_RGB
    //   LST_SINGLE:    LCM_RGB
    //   LST_COLDWARM:  LCM_CT
    //   LST_RGB:       LCM_RGB
    //   LST_RGBW:      LCM_RGB, LCM_CT or LCM_BOTH
    //   LST_RGBCW:     LCM_RGB, LCM_CT or LCM_BOTH
    uint8_t setColorMode(uint8_t cm) {
      uint8_t prev_cm = _color_mode;
      if (cm < LCM_RGB) { cm = LCM_RGB; }
      if (cm > LCM_BOTH) { cm = LCM_BOTH; }
      uint8_t maxbri = (_briRGB >= _briCT) ? _briRGB : _briCT;

      switch (_subtype) {
        case LST_COLDWARM:
          _color_mode = LCM_CT;
          break;

        case LST_NONE:
        case LST_SINGLE:
        case LST_RGB:
        default:
          _color_mode = LCM_RGB;
          break;

        case LST_RGBW:
        case LST_RGBCW:
          _color_mode = cm;
          break;
      }
      if (LCM_RGB == _color_mode) {
        _briCT = 0;
        if (0 == _briRGB) { _briRGB = maxbri; }
      }
      if (LCM_CT == _color_mode) {
        _briRGB = 0;
        if (0 == _briCT) { _briCT = maxbri; }
      }
#ifdef DEBUG_LIGHT
      AddLog_P2(LOG_LEVEL_DEBUG_MORE, "LightStateClass::setColorMode prev_cm (%d) req_cm (%d) new_cm (%d)", prev_cm, cm, _color_mode);
#endif
      return prev_cm;
    }

    inline uint8_t getColorMode() {
      return _color_mode;
    }

    void addRGBMode() {
      setColorMode(_color_mode | LCM_RGB);
    }
    void addCTMode() {
      setColorMode(_color_mode | LCM_CT);
    }

    // Get RGB color, always at full brightness (ie. one of the components is 255)
    void getRGB(uint8_t *r, uint8_t *g, uint8_t *b) {
      if (r) { *r = _r; }
      if (g) { *g = _g; }
      if (b) { *b = _b; }
    }

    // get full brightness values for warm and cold channels.
    // either w=c=0 (off) or w+c >= 255
    void getCW(uint8_t *rc, uint8_t *rw) {
      if (rc) { *rc = _wc; }
      if (rw) { *rw = _ww; }
    }

    // Get the actual values for each channel, ie multiply with brightness
    void getActualRGBCW(uint8_t *r, uint8_t *g, uint8_t *b, uint8_t *c, uint8_t *w) {
      bool rgb_channels_on = _color_mode & LCM_RGB;
      bool ct_channels_on = _color_mode & LCM_CT;

      if (r) { *r = rgb_channels_on ? changeUIntScale(_r, 0, 255, 0, _briRGB) : 0; }
      if (g) { *g = rgb_channels_on ? changeUIntScale(_g, 0, 255, 0, _briRGB) : 0; }
      if (b) { *b = rgb_channels_on ? changeUIntScale(_b, 0, 255, 0, _briRGB) : 0; }

      if (c) { *c = ct_channels_on  ? changeUIntScale(_wc, 0, 255, 0, _briCT) : 0; }
      if (w) { *w = ct_channels_on  ? changeUIntScale(_ww, 0, 255, 0, _briCT) : 0; }
    }

    void getChannels(uint8_t *channels) {
      getActualRGBCW(&channels[0], &channels[1], &channels[2], &channels[3], &channels[4]);
    }

    void getChannelsRaw(uint8_t *channels) {
      channels[0] = _r;
      channels[1] = _g;
      channels[2] = _b;
      channels[3] = _wc;
      channels[4] = _ww;
    }

    void getHSB(uint16_t *hue, uint8_t *sat, uint8_t *bri) {
      if (hue) { *hue = _hue; }
      if (sat) { *sat = _sat; }
      if (bri) { *bri = _briRGB; }
    }

    // getBri() is guaranteed to give the same result as setBri() - no rounding errors.
    uint8_t getBri(void) {
      // return the max of _briCT and _briRGB
      return (_briRGB >= _briCT) ? _briRGB : _briCT;
    }

    // get the white Brightness
    inline uint8_t getBriCT() {
      return _briCT;
    }

    static inline uint8_t DimmerToBri(uint8_t dimmer) {
      return changeUIntScale(dimmer, 0, 100, 0, 255);  // 0..255
    }
    static uint8_t BriToDimmer(uint8_t bri) {
      uint8_t dimmer = changeUIntScale(bri, 0, 255, 0, 100);
      // if brightness is non zero, force dimmer to be non-zero too
      if ((dimmer == 0) && (bri > 0)) { dimmer = 1; }
      return dimmer;
    }

    uint8_t getDimmer(uint32_t mode = 0) {
      uint8_t bri;
      switch (mode) {
        case 1:
          bri = getBriRGB();
          break;
        case 2:
          bri = getBriCT();
          break;
        default:
          bri = getBri();
          break;
      }
      return BriToDimmer(bri);
    }

    inline uint16_t getCT() const {
      return _ct; // 153..500, or CT_MIN..CT_MAX
    }

    // get the CT value within the range into a 10 bits 0..1023 value
    uint16_t getCT10bits() const {
      return changeUIntScale(_ct, _ct_min_range, _ct_max_range, 0, 1023);
    }

    inline void setCTRange(uint16_t ct_min_range, uint16_t ct_max_range) {
      _ct_min_range = ct_min_range;
      _ct_max_range = ct_max_range;
    }

    inline void getCTRange(uint16_t *ct_min_range, uint16_t *ct_max_range) const {
      if (ct_min_range) { *ct_min_range = _ct_min_range; }
      if (ct_max_range) { *ct_max_range = _ct_max_range; }
    }

    // get current color in XY format
    void getXY(float *x, float *y) {
      RgbToXy(_r, _g, _b, x, y);
    }

    // setters -- do not use directly, use the light_controller instead
    // sets both master Bri and whiteBri
    void setBri(uint8_t bri) {
      setBriRGB(_color_mode & LCM_RGB ? bri : 0);
      setBriCT(_color_mode & LCM_CT ? bri : 0);
#ifdef DEBUG_LIGHT
      AddLog_P2(LOG_LEVEL_DEBUG_MORE, "LightStateClass::setBri RGB raw (%d %d %d) HS (%d %d) bri (%d)", _r, _g, _b, _hue, _sat, _briRGB);
#endif
    }

    // changes the RGB brightness alone
    uint8_t setBriRGB(uint8_t bri_rgb) {
      uint8_t prev_bri = _briRGB;
      _briRGB = bri_rgb;
      if (bri_rgb > 0) { addRGBMode(); }
#ifdef USE_PWM_DIMMER
      if (PWM_DIMMER == my_module_type) PWMDimmerSetBrightnessLeds(0);
#endif  // USE_PWM_DIMMER
      return prev_bri;
    }

    // changes the white brightness alone
    uint8_t setBriCT(uint8_t bri_ct) {
      uint8_t prev_bri = _briCT;
      _briCT = bri_ct;
      if (bri_ct > 0) { addCTMode(); }
#ifdef USE_PWM_DIMMER
      if (PWM_DIMMER == my_module_type) PWMDimmerSetBrightnessLeds(0);
#endif  // USE_PWM_DIMMER
      return prev_bri;
    }

    inline uint8_t getBriRGB() {
      return _briRGB;
    }

    void setDimmer(uint8_t dimmer) {
      setBri(DimmerToBri(dimmer));
    }

    void setCT(uint16_t ct) {
      if (0 == ct) {
        // disable ct mode
        setColorMode(LCM_RGB);  // try deactivating CT mode, setColorMode() will check which is legal
      } else {
        ct = (ct < CT_MIN ? CT_MIN : (ct > CT_MAX ? CT_MAX : ct));
        _ww = changeUIntScale(ct, _ct_min_range, _ct_max_range, 0, 255);
        _wc = 255 - _ww;
        _ct = ct;
        addCTMode();
      }
#ifdef DEBUG_LIGHT
      AddLog_P2(LOG_LEVEL_DEBUG_MORE, "LightStateClass::setCT RGB raw (%d %d %d) HS (%d %d) briRGB (%d) briCT (%d) CT (%d)", _r, _g, _b, _hue, _sat, _briRGB, _briCT, _ct);
#endif
    }

    // Manually set Cold/Warm channels.
    // There are two modes:
    // 1. (free_range == false, default)
    //    In this mode there is only one virtual white channel with color temperature
    //    As a side effect, WC+WW = 255. It means also that the sum of light power
    //    from white LEDs is always equal to briCT. It is not possible here
    //    to set both white LEDs at full power, hence protecting power supplies
    //    from overlaoding.
    // 2. (free_range == true)
    //    In this mode, values of WC and WW are free -- both channels can be set
    //    at full power.
    //    In this mode, we always scale both channels so that one at least is 255.
    //
    // We automatically adjust briCT to have the right values of channels
    void setCW(uint8_t c, uint8_t w, bool free_range = false) {
      uint16_t max = (w > c) ? w : c;   // 0..255
      uint16_t sum = c + w;
      if (sum <= 257) { free_range = false; }    // if we don't allow free range or if sum is below 255 (with tolerance of 2)

      if (0 == max) {
        _briCT = 0;       // brightness set to null
        setColorMode(LCM_RGB);  // try deactivating CT mode, setColorMode() will check which is legal
      } else {
        if (!free_range) {
          // we need to normalize to sum = 255
          _ww = changeUIntScale(w, 0, sum, 0, 255);
          _wc = 255 - _ww;
        } else {  // we normalize to max = 255
          _ww = changeUIntScale(w, 0, max, 0, 255);
          _wc = changeUIntScale(c, 0, max, 0, 255);
        }
        _ct = changeUIntScale(w, 0, sum, CT_MIN, CT_MAX);
        addCTMode();   // activate CT mode if needed
        if (_color_mode & LCM_CT) { _briCT = free_range ? max : (sum > 255 ? 255 : sum); }
      }
#ifdef DEBUG_LIGHT
      AddLog_P2(LOG_LEVEL_DEBUG_MORE, "LightStateClass::setCW CW (%d %d) CT (%d) briCT (%d)", c, w, _ct, _briCT);
#endif
    }

    // sets RGB and returns the Brightness. Bri is updated unless keep_bri is true
    uint8_t setRGB(uint8_t r, uint8_t g, uint8_t b, bool keep_bri = false) {
      uint16_t hue;
      uint8_t  sat;
#ifdef DEBUG_LIGHT
      AddLog_P2(LOG_LEVEL_DEBUG_MORE, "LightStateClass::setRGB RGB input (%d %d %d)", r, g, b);
#endif

      uint32_t max = (r > g && r > b) ? r : (g > b) ? g : b;   // 0..255

      if (0 == max) {
        r = g = b = 255;
        setColorMode(LCM_CT);   // try deactivating RGB, setColorMode() will check if this is legal
      } else {
        if (255 > max) {
          // we need to normalize rgb
          r = changeUIntScale(r, 0, max, 0, 255);
          g = changeUIntScale(g, 0, max, 0, 255);
          b = changeUIntScale(b, 0, max, 0, 255);
        }
        addRGBMode();
      }
      if (!keep_bri) {
        _briRGB = (_color_mode & LCM_RGB) ? max : 0;
      }

      RgbToHsb(r, g, b, &hue, &sat, nullptr);
      _r = r;
      _g = g;
      _b = b;
      _hue = hue;
      _sat = sat;
#ifdef DEBUG_LIGHT
      AddLog_P2(LOG_LEVEL_DEBUG_MORE, "LightStateClass::setRGB RGB raw (%d %d %d) HS (%d %d) bri (%d)", _r, _g, _b, _hue, _sat, _briRGB);
#endif
      return max;
    }

    void setHS(uint16_t hue, uint8_t sat) {
      uint8_t r, g, b;
      HsToRgb(hue, sat, &r, &g, &b);
      _r = r;
      _g = g;
      _b = b;
      _hue = hue;
      _sat = sat;
      addRGBMode();
#ifdef DEBUG_LIGHT
      AddLog_P2(LOG_LEVEL_DEBUG_MORE, "LightStateClass::setHS HS (%d %d) rgb (%d %d %d)", hue, sat, r, g, b);
      AddLog_P2(LOG_LEVEL_DEBUG_MORE, "LightStateClass::setHS RGB raw (%d %d %d) HS (%d %d) bri (%d)", _r, _g, _b, _hue, _sat, _briRGB);
#endif
  }

  // set all 5 channels at once, don't modify the values in ANY way
  // Channels are: R G B CW WW
  void setChannelsRaw(uint8_t *channels) {
    _r = channels[0];
    _g = channels[1];
    _b = channels[2];
    _wc = channels[3];
    _ww = channels[4];
}

  // set all 5 channels at once.
  // Channels are: R G B CW WW
  // Brightness is automatically recalculated to adjust channels to the desired values
  void setChannels(uint8_t *channels) {
    setRGB(channels[0], channels[1], channels[2]);
    setCW(channels[3], channels[4], true);  // free range for WC and WW
#ifdef DEBUG_LIGHT
    AddLog_P2(LOG_LEVEL_DEBUG_MORE, "LightStateClass::setChannels (%d %d %d %d %d)",
      channels[0], channels[1], channels[2], channels[3], channels[4]);
    AddLog_P2(LOG_LEVEL_DEBUG_MORE, "LightStateClass::setChannels CT (%d) briRGB (%d) briCT (%d)", _ct, _briRGB, _briCT);
    AddLog_P2(LOG_LEVEL_DEBUG_MORE, "LightStateClass::setChannels Actuals (%d %d %d %d %d)",
      _r, _g, _b, _wc, _ww);
#endif
  }

    // new version of RGB to HSB with only integer calculation
    static void RgbToHsb(uint8_t r, uint8_t g, uint8_t b, uint16_t *r_hue, uint8_t *r_sat, uint8_t *r_bri);
    static void HsToRgb(uint16_t hue, uint8_t sat, uint8_t *r_r, uint8_t *r_g, uint8_t *r_b);
    static void RgbToXy(uint8_t i_r, uint8_t i_g, uint8_t i_b, float *r_x, float *r_y);
    static void XyToRgb(float x, float y, uint8_t *rr, uint8_t *rg, uint8_t *rb);

};


/*********************************************************************************************\
 * LightStateClass implementation
\*********************************************************************************************/

// new version with only integer computing
// brightness is not needed, it is controlled via Dimmer
void LightStateClass::RgbToHsb(uint8_t ir, uint8_t ig, uint8_t ib, uint16_t *r_hue, uint8_t *r_sat, uint8_t *r_bri) {
  uint32_t r = ir;
  uint32_t g = ig;
  uint32_t b = ib;
  uint32_t max = (r > g && r > b) ? r : (g > b) ? g : b;   // 0..255
  uint32_t min = (r < g && r < b) ? r : (g < b) ? g : b;   // 0..255
  uint32_t d = max - min;   // 0..255

  uint16_t hue = 0;   // hue value in degrees ranges from 0 to 359
  uint8_t sat = 0;    // 0..255
  uint8_t bri = max;  // 0..255

  if (d != 0) {
    sat = changeUIntScale(d, 0, max, 0, 255);
    if (r == max) {
      hue = (g > b) ?       changeUIntScale(g-b,0,d,0,60) : 360 - changeUIntScale(b-g,0,d,0,60);
    } else if (g == max) {
      hue = (b > r) ? 120 + changeUIntScale(b-r,0,d,0,60) : 120 - changeUIntScale(r-b,0,d,0,60);
    } else {
      hue = (r > g) ? 240 + changeUIntScale(r-g,0,d,0,60) : 240 - changeUIntScale(g-r,0,d,0,60);
    }
    hue = hue % 360;    // 0..359
  }

  if (r_hue) *r_hue = hue;
  if (r_sat) *r_sat = sat;
  if (r_bri) *r_bri = bri;
  //AddLog_P2(LOG_LEVEL_DEBUG_MORE, "RgbToHsb rgb (%d %d %d) hsb (%d %d %d)", r, g, b, hue, sat, bri);
}

void LightStateClass::HsToRgb(uint16_t hue, uint8_t sat, uint8_t *r_r, uint8_t *r_g, uint8_t *r_b) {
  uint32_t r = 255;  // default to white
  uint32_t g = 255;
  uint32_t b = 255;
  // we take brightness at 100%, brightness should be set separately
  hue = hue % 360;  // normalize to 0..359

  if (sat > 0) {
    uint32_t i = hue / 60;   // quadrant 0..5
    uint32_t f = hue % 60;   // 0..59
    uint32_t q = 255 - changeUIntScale(f, 0, 60, 0, sat);  // 0..59
    uint32_t p = 255 - sat;
    uint32_t t = 255 - changeUIntScale(60 - f, 0, 60, 0, sat);

    switch (i) {
      case 0:
        //r = 255;
        g = t;
        b = p;
        break;
      case 1:
        r = q;
        //g = 255;
        b = p;
        break;
      case 2:
        r = p;
        //g = 255;
        b = t;
        break;
      case 3:
        r = p;
        g = q;
        //b = 255;
        break;
      case 4:
        r = t;
        g = p;
        //b = 255;
        break;
      default:
        //r = 255;
        g = p;
        b = q;
        break;
      }
    }
  if (r_r)  *r_r = r;
  if (r_g)  *r_g = g;
  if (r_b)  *r_b = b;
}

#define POW FastPrecisePowf

//
// Matrix 3x3 multiplied to a 3 vector, result in a 3 vector
//
void mat3x3(const float *mat33, const float *vec3, float *res3) {
  for (uint32_t i = 0; i < 3; i++) {
    const float * v = vec3;
    *res3 = 0.0f;
    for (uint32_t j = 0; j < 3; j++) {
      *res3 += *mat33++ * *v++;
    }
    res3++;
  }
}

void LightStateClass::RgbToXy(uint8_t i_r, uint8_t i_g, uint8_t i_b, float *r_x, float *r_y) {
  float x = 0.31271f;   // default medium white
  float y = 0.32902f;

  if (i_r + i_b + i_g > 0) {
    float rgb[3] = { (float)i_r, (float)i_g, (float)i_b };
    // https://gist.github.com/popcorn245/30afa0f98eea1c2fd34d
    // Gamma correction
    for (uint32_t i = 0; i < 3; i++) {
      rgb[i] = rgb[i] / 255.0f;
      rgb[i] = (rgb[i] > 0.04045f) ? POW((rgb[i] + 0.055f) / (1.0f + 0.055f), 2.4f) : (rgb[i] / 12.92f);
    }

    // conversion to X, Y, Z
    // Y is also the Luminance
    float XYZ[3];
    static const float XYZ_factors[] = {  0.649926f, 0.103455f, 0.197109f,
                                          0.234327f, 0.743075f, 0.022598f,
                                          0.000000f, 0.053077f, 1.035763f };
    mat3x3(XYZ_factors, rgb, XYZ);

    float XYZ_sum = XYZ[0] + XYZ[1] + XYZ[2];
    x = XYZ[0] / XYZ_sum;
    y = XYZ[1] / XYZ_sum;
    // we keep the raw gamut, one nice thing could be to convert to a narrower gamut
  }
  if (r_x)  *r_x = x;
  if (r_y)  *r_y = y;
}

void LightStateClass::XyToRgb(float x, float y, uint8_t *rr, uint8_t *rg, uint8_t *rb)
{
  float XYZ[3], rgb[3];
  x = (x > 0.99f ? 0.99f : (x < 0.01f ? 0.01f : x));
  y = (y > 0.99f ? 0.99f : (y < 0.01f ? 0.01f : y));
  float z = 1.0f - x - y;
  XYZ[0] = x / y;
  XYZ[1] = 1.0f;
  XYZ[2] = z / y;

  static const float rgb_factors[] = {  3.2406f, -1.5372f, -0.4986f,
                                       -0.9689f,  1.8758f,  0.0415f,
                                        0.0557f, -0.2040f,  1.0570f };
  mat3x3(rgb_factors, XYZ, rgb);
  float max = (rgb[0] > rgb[1] && rgb[0] > rgb[2]) ? rgb[0] : (rgb[1] > rgb[2]) ? rgb[1] : rgb[2];

  for (uint32_t i = 0; i < 3; i++) {
    rgb[i] = rgb[i] / max; // normalize to max == 1.0
    rgb[i] = (rgb[i] <= 0.0031308f) ? 12.92f * rgb[i] : 1.055f * POW(rgb[i], (1.0f / 2.4f)) - 0.055f; // gamma
  }

  int32_t irgb[3];
  for (uint32_t i = 0; i < 3; i++) {
    irgb[i] = rgb[i] * 255.0f + 0.5f;
  }

  if (rr) { *rr = (irgb[0] > 255 ? 255: (irgb[0] < 0 ? 0 : irgb[0])); }
  if (rg) { *rg = (irgb[1] > 255 ? 255: (irgb[1] < 0 ? 0 : irgb[1])); }
  if (rb) { *rb = (irgb[2] > 255 ? 255: (irgb[2] < 0 ? 0 : irgb[2])); }
}

class LightControllerClass {
private:
  LightStateClass *_state;

  // are RGB and CT linked, i.e. if we set CT then RGB channels are off
  bool     _ct_rgb_linked = true;
  bool     _pwm_multi_channels = false;    // treat each channel as independant dimmer

public:
  LightControllerClass(LightStateClass& state) {
    _state = &state;
  }

  void setSubType(uint8_t sub_type) {
    _state->setSubType(sub_type);
  }

  inline bool setCTRGBLinked(bool ct_rgb_linked) {
    bool prev = _ct_rgb_linked;
    if (_pwm_multi_channels) {
      _ct_rgb_linked = false;   // force to false if _pwm_multi_channels is set
    } else {
      _ct_rgb_linked = ct_rgb_linked;
    }
    return prev;
  }

  void setAlexaCTRange(bool alexa_ct_range) {
    // depending on SetOption82, full or limited CT range
    if (alexa_ct_range) {
      _state->setCTRange(CT_MIN_ALEXA, CT_MAX_ALEXA);   // 200..380
    } else {
      _state->setCTRange(CT_MIN, CT_MAX);               // 153..500
    }
  }

  inline bool isCTRGBLinked() {
    return _ct_rgb_linked;
  }

  inline bool setPWMMultiChannel(bool pwm_multi_channels) {
    bool prev = _pwm_multi_channels;
    _pwm_multi_channels = pwm_multi_channels;
    if (pwm_multi_channels)  setCTRGBLinked(false);    // if pwm multi channel, then unlink RGB and CT
    return prev;
  }

  inline bool isPWMMultiChannel(void) {
    return _pwm_multi_channels;
  }

#ifdef DEBUG_LIGHT
  void debugLogs() {
    uint8_t r,g,b,c,w;
    _state->getActualRGBCW(&r,&g,&b,&c,&w);
    AddLog_P2(LOG_LEVEL_DEBUG_MORE, "LightControllerClass::debugLogs rgb (%d %d %d) cw (%d %d)",
      r, g, b, c, w);
    AddLog_P2(LOG_LEVEL_DEBUG_MORE, "LightControllerClass::debugLogs lightCurrent (%d %d %d %d %d)",
      Light.current_color[0], Light.current_color[1], Light.current_color[2],
      Light.current_color[3], Light.current_color[4]);
  }
#endif

  void loadSettings() {
#ifdef DEBUG_LIGHT
    AddLog_P2(LOG_LEVEL_DEBUG_MORE, "LightControllerClass::loadSettings Settings.light_color (%d %d %d %d %d - %d)",
      Settings.light_color[0], Settings.light_color[1], Settings.light_color[2],
      Settings.light_color[3], Settings.light_color[4], Settings.light_dimmer);
    AddLog_P2(LOG_LEVEL_DEBUG_MORE, "LightControllerClass::loadSettings light_type/sub (%d %d)",
      light_type, Light.subtype);
#endif
    if (_pwm_multi_channels) {
      _state->setChannelsRaw(Settings.light_color);
    } else {
      // first try setting CW, if zero, it select RGB mode
      _state->setCW(Settings.light_color[3], Settings.light_color[4], true);
      _state->setRGB(Settings.light_color[0], Settings.light_color[1], Settings.light_color[2]);

      // only if non-multi channel
      // We apply dimmer in priority to RGB
      uint8_t bri = _state->DimmerToBri(Settings.light_dimmer);

      // The default values are #FFFFFFFFFF, in this case we avoid setting all channels
      // at the same time, see #6534 and #8120
      if ((DEFAULT_LIGHT_COMPONENT == Settings.light_color[0]) &&
          (DEFAULT_LIGHT_COMPONENT == Settings.light_color[1]) &&
          (DEFAULT_LIGHT_COMPONENT == Settings.light_color[2]) &&
          (DEFAULT_LIGHT_COMPONENT == Settings.light_color[3]) &&
          (DEFAULT_LIGHT_COMPONENT == Settings.light_color[4]) &&
          (DEFAULT_LIGHT_DIMMER    == Settings.light_dimmer) ) {
        if ((LST_COLDWARM == Light.subtype) || (LST_RGBCW == Light.subtype)) {
          _state->setCW(255, 0);       // avoid having both white channels at 100%, zero second channel (#see 8120)
        }
        _state->setBriCT(bri);
        _state->setBriRGB(bri);
        _state->setColorMode(LCM_RGB);
      }

      if (Settings.light_color[0] + Settings.light_color[1] + Settings.light_color[2] > 0) {
        _state->setBriRGB(bri);
      } else {
        _state->setBriCT(bri);
      }
    }
  }

  void changeCTB(uint16_t new_ct, uint8_t briCT) {
    /* Color Temperature (https://developers.meethue.com/documentation/core-concepts)
     *
     * ct = 153 = 6500K = Cold = CCWW = FF00
     * ct = 500 = 2000K = Warm = CCWW = 00FF
     */
    // don't set CT if not supported
    if ((LST_COLDWARM != Light.subtype) && (LST_RGBW > Light.subtype)) {
      return;
    }
    _state->setCT(new_ct);
    _state->setBriCT(briCT);
    if (_ct_rgb_linked) { _state->setColorMode(LCM_CT); }   // try to force CT
    saveSettings();
    calcLevels();
    //debugLogs();
  }

  void changeDimmer(uint8_t dimmer, uint32_t mode = 0) {
    uint8_t bri = changeUIntScale(dimmer, 0, 100, 0, 255);
    switch (mode) {
      case 1:
        changeBriRGB(bri);
        if (_ct_rgb_linked) { _state->setColorMode(LCM_RGB); }   // try to force CT
        break;
      case 2:
        changeBriCT(bri);
        if (_ct_rgb_linked) { _state->setColorMode(LCM_CT); }   // try to force CT
        break;
      default:
        changeBri(bri);
        break;
    }
  }

  void changeBri(uint8_t bri) {
    _state->setBri(bri);
    saveSettings();
    calcLevels();
  }

  void changeBriRGB(uint8_t bri) {
    _state->setBriRGB(bri);
    saveSettings();
    calcLevels();
  }

  void changeBriCT(uint8_t bri) {
    _state->setBriCT(bri);
    saveSettings();
    calcLevels();
  }

  void changeRGB(uint8_t r, uint8_t g, uint8_t b, bool keep_bri = false) {
    _state->setRGB(r, g, b, keep_bri);
    if (_ct_rgb_linked) { _state->setColorMode(LCM_RGB); }   // try to force RGB
    saveSettings();
    calcLevels();
  }

  // calculate the levels for each channel
  // if no parameter, results are stored in Light.current_color
  void calcLevels(uint8_t *current_color = nullptr) {
    uint8_t r,g,b,c,w,briRGB,briCT;
    if (current_color == nullptr) { current_color = Light.current_color; }

    if (_pwm_multi_channels) { // if PWM multi channel, no more transformation required
      _state->getChannelsRaw(current_color);
      return;
    }

    _state->getActualRGBCW(&r,&g,&b,&c,&w);
    briRGB = _state->getBriRGB();
    briCT = _state->getBriCT();

    current_color[0] = current_color[1] = current_color[2] = 0;
    current_color[3] = current_color[4] = 0;
    switch (Light.subtype) {
      case LST_NONE:
        current_color[0] = 255;
        break;
      case LST_SINGLE:
        current_color[0] = briRGB;
        break;
      case LST_COLDWARM:
        current_color[0] = c;
        current_color[1] = w;
        break;
      case LST_RGBW:
      case LST_RGBCW:
        if (LST_RGBCW == Light.subtype) {
          current_color[3] = c;
          current_color[4] = w;
        } else {
          current_color[3] = briCT;
        }
        // continue
      case LST_RGB:
        current_color[0] = r;
        current_color[1] = g;
        current_color[2] = b;
        break;
    }
  }

  void changeHSB(uint16_t hue, uint8_t sat, uint8_t briRGB) {
    _state->setHS(hue, sat);
    _state->setBriRGB(briRGB);
    if (_ct_rgb_linked) { _state->setColorMode(LCM_RGB); }   // try to force RGB
    saveSettings();
    calcLevels();
  }

  // save the current light state to Settings.
  void saveSettings() {
    if (Light.pwm_multi_channels) {
      // simply save each channel
      _state->getChannelsRaw(Settings.light_color);
      Settings.light_dimmer = 100;    // arbitrary value, unused in this mode
    } else {
      uint8_t cm = _state->getColorMode();

      memset(&Settings.light_color[0], 0, sizeof(Settings.light_color));    // clear all channels
      if (LCM_RGB & cm) {   // can be either LCM_RGB or LCM_BOTH
        _state->getRGB(&Settings.light_color[0], &Settings.light_color[1], &Settings.light_color[2]);
        Settings.light_dimmer = _state->BriToDimmer(_state->getBriRGB());
        // anyways we always store RGB with BrightnessRGB
        if (LCM_BOTH == cm) {
          // then store at actual brightness CW/WW if dual mode
          _state->getActualRGBCW(nullptr, nullptr, nullptr, &Settings.light_color[3], &Settings.light_color[4]);
        }
      } else if (LCM_CT == cm) {    // cm can only be LCM_CT
        _state->getCW(&Settings.light_color[3], &Settings.light_color[4]);
        Settings.light_dimmer = _state->BriToDimmer(_state->getBriCT());
      }
    }
#ifdef DEBUG_LIGHT
    AddLog_P2(LOG_LEVEL_DEBUG_MORE, "LightControllerClass::saveSettings Settings.light_color (%d %d %d %d %d - %d)",
      Settings.light_color[0], Settings.light_color[1], Settings.light_color[2],
      Settings.light_color[3], Settings.light_color[4], Settings.light_dimmer);
#endif
  }

  // set all 5 channels at once.
  // Channels are: R G B CW WW
  // Brightness is automatically recalculated to adjust channels to the desired values
  void changeChannels(uint8_t *channels) {
    if (Light.pwm_multi_channels) {
      _state->setChannelsRaw(channels);
    } else if (LST_COLDWARM == Light.subtype) {
      // remap channels 0-1 to 3-4 if cold/warm
      uint8_t remapped_channels[5] = {0,0,0,channels[0],channels[1]};
      _state->setChannels(remapped_channels);
    } else {
      _state->setChannels(channels);
    }

    saveSettings();
    calcLevels();
  }
};


// the singletons for light state and Light Controller
LightStateClass light_state = LightStateClass();
LightControllerClass light_controller = LightControllerClass(light_state);

/*********************************************************************************************\
 * Change scales from 8 bits to 10 bits and vice versa
\*********************************************************************************************/
// 8 to 10 to 8 is garanteed to give the same result
uint16_t change8to10(uint8_t v) {
  return changeUIntScale(v, 0, 255, 0, 1023);
}
// change from 10 bits to 8 bits, but any non-zero input will be non-zero
uint8_t change10to8(uint16_t v) {
  return (0 == v) ? 0 : changeUIntScale(v, 4, 1023, 1, 255);
}

/*********************************************************************************************\
 * Gamma correction
\*********************************************************************************************/
// Calculate the gamma corrected value for LEDS
uint16_t ledGamma_internal(uint16_t v, const struct gamma_table_t *gt_ptr) {
  uint16_t from_src = 0;
  uint16_t from_gamma = 0;

  for (const gamma_table_t *gt = gt_ptr; ; gt++) {
    uint16_t to_src = gt->to_src;
    uint16_t to_gamma = gt->to_gamma;
    if (v <= to_src) {
      return changeUIntScale(v, from_src, to_src, from_gamma, to_gamma);
    }
    from_src = to_src;
    from_gamma = to_gamma;
  }
}
// Calculate the reverse gamma value for LEDS
uint16_t ledGammaReverse_internal(uint16_t vg, const struct gamma_table_t *gt_ptr) {
  uint16_t from_src = 0;
  uint16_t from_gamma = 0;

  for (const gamma_table_t *gt = gt_ptr; ; gt++) {
    uint16_t to_src = gt->to_src;
    uint16_t to_gamma = gt->to_gamma;
    if (vg <= to_gamma) {
      return changeUIntScale(vg, from_gamma, to_gamma, from_src, to_src);
    }
    from_src = to_src;
    from_gamma = to_gamma;
  }
}

// 10 bits in, 10 bits out
uint16_t ledGamma10_10(uint16_t v) {
  return ledGamma_internal(v, gamma_table);
}
// 10 bits resolution, 8 bits in
uint16_t ledGamma10(uint8_t v) {
  return ledGamma10_10(change8to10(v));
}

// Legacy function
uint8_t ledGamma(uint8_t v) {
  return change10to8(ledGamma10(v));
}

/********************************************************************************************/

void LightPwmOffset(uint32_t offset)
{
  Light.pwm_offset = offset;
}

bool LightModuleInit(void)
{
  light_type = LT_BASIC;                    // Use basic PWM control if SetOption15 = 0

  if (Settings.flag.pwm_control) {          // SetOption15 - Switch between commands PWM or COLOR/DIMMER/CT/CHANNEL
    for (uint32_t i = 0; i < MAX_PWMS; i++) {
      if (PinUsed(GPIO_PWM1, i)) { light_type++; }  // Use Dimmer/Color control for all PWM as SetOption15 = 1
    }
  }

  light_flg = 0;
  if (XlgtCall(FUNC_MODULE_INIT)) {
    // serviced
  }
#ifdef ESP8266
  else if (SONOFF_BN == my_module_type) {   // PWM Single color led (White)
    light_type = LT_PWM1;
  }
  else if (SONOFF_LED == my_module_type) {  // PWM Dual color led (White warm and cold)
    if (!my_module.io[4]) {                 // Fix Sonoff Led instabilities
      pinMode(4, OUTPUT);                   // Stop floating outputs
      digitalWrite(4, LOW);
    }
    if (!my_module.io[5]) {
      pinMode(5, OUTPUT);                   // Stop floating outputs
      digitalWrite(5, LOW);
    }
    if (!my_module.io[14]) {
      pinMode(14, OUTPUT);                  // Stop floating outputs
      digitalWrite(14, LOW);
    }
    light_type = LT_PWM2;
  }
#endif  // ESP8266
#ifdef USE_PWM_DIMMER
#ifdef USE_DEVICE_GROUPS
  else if (PWM_DIMMER == my_module_type) {
    light_type = Settings.pwm_dimmer_cfg.pwm_count + 1;
  }
#endif  // USE_DEVICE_GROUPS
#endif  // USE_PWM_DIMMER

  if (light_type > LT_BASIC) {
    devices_present++;
  }

  // post-process for lights
  uint32_t pwm_channels = (light_type & 7) > LST_MAX ? LST_MAX : (light_type & 7);
  if (Settings.flag3.pwm_multi_channels) {  // SetOption68 - Enable multi-channels PWM instead of Color PWM
    if (0 == pwm_channels) { pwm_channels = 1; }
    devices_present += pwm_channels - 1;    // add the pwm channels controls at the end
  } else if ((Settings.param[P_RGB_REMAP] & 128) && (LST_RGBW <= pwm_channels)) {
    // if RGBW or RGBCW, and SetOption37 >= 128, we manage RGB and W separately, hence adding a device
    devices_present++;
  } else if ((Settings.flag4.virtual_ct) && (LST_RGBW == pwm_channels)) {
    Light.virtual_ct = true;    // enabled
    light_type++;               // create an additional virtual 5th channel
  }

  return (light_type > LT_BASIC);
}

// compute actual PWM min/max values from DimmerRange
// must be called when DimmerRange is changed or LedTable
void LightCalcPWMRange(void) {
  uint16_t pwm_min, pwm_max;

  pwm_min = change8to10(LightStateClass::DimmerToBri(Settings.dimmer_hw_min));   // default 0
  pwm_max = change8to10(LightStateClass::DimmerToBri(Settings.dimmer_hw_max));   // default 100
  if (Settings.light_correction) {
    pwm_min = ledGamma10_10(pwm_min);       // apply gamma correction
    pwm_max = ledGamma10_10(pwm_max);       // 0..1023
  }
  pwm_min = pwm_min > 0 ? changeUIntScale(pwm_min, 1, 1023, 1, Settings.pwm_range) : 0;  // adapt range but keep zero and non-zero values
  pwm_max = changeUIntScale(pwm_max, 1, 1023, 1, Settings.pwm_range);  // pwm_max cannot be zero

  Light.pwm_min = pwm_min;
  Light.pwm_max = pwm_max;
  //AddLog_P2(LOG_LEVEL_DEBUG_MORE, PSTR("LightCalcPWMRange %d %d - %d %d"), Settings.dimmer_hw_min, Settings.dimmer_hw_max, Light.pwm_min, Light.pwm_max);
}

void LightInit(void)
{
  // move white blend mode from deprecated `RGBWWTable` to `SetOption105`
  if (0 == Settings.rgbwwTable[4]) {
    Settings.flag4.white_blend_mode = true;
    Settings.rgbwwTable[4] = 255;       // set RGBWWTable value to its default
  }

  Light.device = devices_present;
  Light.subtype = (light_type & 7) > LST_MAX ? LST_MAX : (light_type & 7); // Always 0 - LST_MAX (5)
  Light.pwm_multi_channels = Settings.flag3.pwm_multi_channels;  // SetOption68 - Enable multi-channels PWM instead of Color PWM

  if (LST_RGBW <= Light.subtype) {
    // only change if RGBW or RGBCW
    // do not allow independant RGB and WC colors
    bool ct_rgb_linked = !(Settings.param[P_RGB_REMAP] & 128);
    light_controller.setCTRGBLinked(ct_rgb_linked);
  }

  if ((LST_SINGLE <= Light.subtype) && Light.pwm_multi_channels) {
    // we treat each PWM channel as an independant one, hence we switch to
    light_controller.setPWMMultiChannel(true);
    Light.device = devices_present - Light.subtype + 1; // adjust if we also have relays
  } else if (!light_controller.isCTRGBLinked()) {
    // if RGBW or RGBCW, and SetOption37 >= 128, we manage RGB and W separately
    Light.device--;   // we take the last two devices as lights
  }
  LightCalcPWMRange();
#ifdef DEBUG_LIGHT
  AddLog_P2(LOG_LEVEL_DEBUG_MORE, "LightInit Light.pwm_multi_channels=%d Light.subtype=%d Light.device=%d devices_present=%d",
    Light.pwm_multi_channels, Light.subtype, Light.device, devices_present);
#endif

  light_controller.setSubType(Light.subtype);
  light_controller.loadSettings();
  light_controller.setAlexaCTRange(Settings.flag4.alexa_ct_range);
  light_controller.calcLevels();    // calculate the initial values (#8058)

  if (LST_SINGLE == Light.subtype) {
    Settings.light_color[0] = 255;      // One channel only supports Dimmer but needs max color
  }
  if (light_type < LT_PWM6) {           // PWM
    for (uint32_t i = 0; i < light_type; i++) {
      Settings.pwm_value[i] = 0;        // Disable direct PWM control
      if (PinUsed(GPIO_PWM1, i)) {
#ifdef ESP8266
        pinMode(Pin(GPIO_PWM1, i), OUTPUT);
#else  // ESP32
        analogAttach(Pin(GPIO_PWM1, i), i);
#endif
      }
    }
    if (PinUsed(GPIO_ARIRFRCV)) {
      if (PinUsed(GPIO_ARIRFSEL)) {
        pinMode(Pin(GPIO_ARIRFSEL), OUTPUT);
        digitalWrite(Pin(GPIO_ARIRFSEL), 1);  // Turn off RF
      }
    }
  }

  uint32_t max_scheme = Light.max_scheme;
  if (Light.subtype < LST_RGB) {
    max_scheme = LS_POWER;
  }
  if ((LS_WAKEUP == Settings.light_scheme) || (Settings.light_scheme > max_scheme)) {
    Settings.light_scheme = LS_POWER;
  }
  Light.power = 0;
  Light.update = true;
  Light.wakeup_active = 0;
  if (Settings.flag4.fade_at_startup) {
    Light.fade_initialized = true;      // consider fade intialized starting from black
  }

  LightUpdateColorMapping();
}

void LightUpdateColorMapping(void)
{
  uint8_t param = Settings.param[P_RGB_REMAP] & 127;
  if (param > 119){ param = 0; }

  uint8_t tmp[] = {0,1,2,3,4};
  Light.color_remap[0] = tmp[param / 24];
  for (uint32_t i = param / 24; i<4; ++i){
    tmp[i] = tmp[i+1];
  }
  param = param % 24;
  Light.color_remap[1] = tmp[(param / 6)];
  for (uint32_t i = param / 6; i<3; ++i){
    tmp[i] = tmp[i+1];
  }
  param = param % 6;
  Light.color_remap[2] = tmp[(param / 2)];
  for (uint32_t i = param / 2; i<2; ++i){
    tmp[i] = tmp[i+1];
  }
  param = param % 2;
  Light.color_remap[3] = tmp[param];
  Light.color_remap[4] = tmp[1-param];

  Light.update = true;
  //AddLog_P2(LOG_LEVEL_DEBUG, PSTR("%d colors: %d %d %d %d %d") ,Settings.param[P_RGB_REMAP], Light.color_remap[0],Light.color_remap[1],Light.color_remap[2],Light.color_remap[3],Light.color_remap[4]);
}

uint8_t LightGetDimmer(uint8_t dimmer) {
  return light_state.getDimmer(dimmer);
}

void LightSetDimmer(uint8_t dimmer) {
  light_controller.changeDimmer(dimmer);
}

void LightGetHSB(uint16_t *hue, uint8_t *sat, uint8_t *bri) {
  light_state.getHSB(hue, sat, bri);
}

void LightGetXY(float *X, float *Y) {
  light_state.getXY(X, Y);
}

void LightHsToRgb(uint16_t hue, uint8_t sat, uint8_t *r_r, uint8_t *r_g, uint8_t *r_b) {
  light_state.HsToRgb(hue, sat, r_r, r_g, r_b);
}

// If SetOption68 is set, get the brightness for a specific device
uint8_t LightGetBri(uint8_t device) {
  uint8_t bri = 254;   // default value if relay
  if (Light.pwm_multi_channels) {
    if ((device >= Light.device) && (device < Light.device + LST_MAX) && (device <= devices_present)) {
      bri = Light.current_color[device - Light.device];
    }
  } else if (light_controller.isCTRGBLinked()) {   // standard behavior
    if (device == Light.device) {
      bri = light_state.getBri();
    }
  } else {    // unlinked
    if (device == Light.device) {
      bri = light_state.getBriRGB();
    } else if (device == Light.device + 1) {
      bri = light_state.getBriCT();
    }
  }
  return bri;
}

// If SetOption68 is set, set the brightness for a specific device
void LightSetBri(uint8_t device, uint8_t bri) {
  if (Light.pwm_multi_channels) {
    if ((device >= Light.device) && (device < Light.device + LST_MAX) && (device <= devices_present)) {
      Light.current_color[device - Light.device] = bri;
      light_controller.changeChannels(Light.current_color);
    }
  } else if (light_controller.isCTRGBLinked()) {  // standard
    if (device == Light.device) {
      light_controller.changeBri(bri);
    }
  } else {  // unlinked
    if (device == Light.device) {
      light_controller.changeBriRGB(bri);
    } else if (device == Light.device + 1) {
      light_controller.changeBriCT(bri);
    }
  }
}

void LightColorOffset(int32_t offset) {
  uint16_t hue;
  uint8_t sat;
  light_state.getHSB(&hue, &sat, nullptr);  // Allow user control over Saturation
  hue += offset;
  if (hue < 0) { hue += 359; }
  if (hue > 359) { hue -= 359; }
  if (!Light.pwm_multi_channels) {
    light_state.setHS(hue, sat);
  } else {
    light_state.setHS(hue, 255);
    light_state.setBri(255);        // If multi-channel, force bri to max, it will be later dimmed to correct value
  }
  light_controller.calcLevels(Light.new_color);
}

bool LightColorTempOffset(int32_t offset) {
  int32_t ct = LightGetColorTemp();
  if (0 == ct) { return false; }  // CT not supported
  ct += offset;
  if (ct < CT_MIN) { ct = CT_MIN; }
  else if (ct > CT_MAX) { ct = CT_MAX; }

  LightSetColorTemp(ct);
  return true;
}

void LightSetColorTemp(uint16_t ct)
{
/* Color Temperature (https://developers.meethue.com/documentation/core-concepts)
 *
 * ct = 153 mirek = 6500K = Cold = CCWW = FF00
 * ct = 500 mirek = 2000K = Warm = CCWW = 00FF
 */
  // don't set CT if not supported
  if ((LST_COLDWARM != Light.subtype) && (LST_RGBCW != Light.subtype)) {
    return;
  }
  light_controller.changeCTB(ct, light_state.getBriCT());
}

uint16_t LightGetColorTemp(void)
{
  // don't calculate CT for unsupported devices
  if ((LST_COLDWARM != Light.subtype) && (LST_RGBCW != Light.subtype)) {
    return 0;
  }
  return (light_state.getColorMode() & LCM_CT) ? light_state.getCT() : 0;
}

void LightSetSignal(uint16_t lo, uint16_t hi, uint16_t value)
{
/* lo - below lo is green
   hi - above hi is red
*/
  if (Settings.flag.light_signal) {  // SetOption18 - Pair light signal with CO2 sensor
    uint16_t signal = changeUIntScale(value, lo, hi, 0, 255);  // 0..255
//    AddLog_P2(LOG_LEVEL_DEBUG, PSTR(D_LOG_DEBUG "Light signal %d"), signal);
    light_controller.changeRGB(signal, 255 - signal, 0, true);  // keep bri
    Settings.light_scheme = 0;
    if (0 == light_state.getBri()) {
      light_controller.changeBri(50);
    }
  }
}

// convert channels to string, use Option 17 to foce decimal, unless force_hex
char* LightGetColor(char* scolor, boolean force_hex = false)
{
  if ((0 == Settings.light_scheme) || (!Light.pwm_multi_channels)) {
    light_controller.calcLevels();      // recalculate levels only if Scheme 0, otherwise we mess up levels
  }
  scolor[0] = '\0';
  for (uint32_t i = 0; i < Light.subtype; i++) {
    if (!force_hex && Settings.flag.decimal_text) {  // SetOption17 - Switch between decimal or hexadecimal output
      snprintf_P(scolor, LIGHT_COLOR_SIZE, PSTR("%s%s%d"), scolor, (i > 0) ? "," : "", Light.current_color[i]);
    } else {
      snprintf_P(scolor, LIGHT_COLOR_SIZE, PSTR("%s%02X"), scolor, Light.current_color[i]);
    }
  }
  return scolor;
}

void LightPowerOn(void)
{
  if (light_state.getBri() && !(Light.power)) {
    ExecuteCommandPower(Light.device, POWER_ON, SRC_LIGHT);
  }
}

void ResponseLightState(uint8_t append)
{
  char scolor[LIGHT_COLOR_SIZE];
  char scommand[33];
  bool unlinked = !light_controller.isCTRGBLinked() && (Light.subtype >= LST_RGBW);  // there are 2 power and dimmers for RGB and White

  if (append) {
    ResponseAppend_P(PSTR(","));
  } else {
    Response_P(PSTR("{"));
  }
  if (!Light.pwm_multi_channels) {
    if (unlinked) {
      // RGB and W are unlinked, we display the second Power/Dimmer
      ResponseAppend_P(PSTR("\"" D_RSLT_POWER "%d\":\"%s\",\"" D_CMND_DIMMER "1\":%d"
                           ",\"" D_RSLT_POWER "%d\":\"%s\",\"" D_CMND_DIMMER "2\":%d"),
                            Light.device, GetStateText(Light.power & 1), light_state.getDimmer(1),
                            Light.device + 1, GetStateText(Light.power & 2 ? 1 : 0), light_state.getDimmer(2));
    } else {
      GetPowerDevice(scommand, Light.device, sizeof(scommand), Settings.flag.device_index_enable);  // SetOption26 - Switch between POWER or POWER1
      ResponseAppend_P(PSTR("\"%s\":\"%s\",\"" D_CMND_DIMMER "\":%d"), scommand, GetStateText(Light.power & 1),
                      light_state.getDimmer());
    }


    if (Light.subtype > LST_SINGLE) {
      ResponseAppend_P(PSTR(",\"" D_CMND_COLOR "\":\"%s\""), LightGetColor(scolor));
      if (LST_RGB <= Light.subtype) {
        uint16_t hue;
        uint8_t  sat, bri;
        light_state.getHSB(&hue, &sat, &bri);
        sat = changeUIntScale(sat, 0, 255, 0, 100);
        bri = changeUIntScale(bri, 0, 255, 0, 100);

        ResponseAppend_P(PSTR(",\"" D_CMND_HSBCOLOR "\":\"%d,%d,%d\""), hue,sat,bri);
      }
      // Add White level
      if ((LST_COLDWARM == Light.subtype) || (LST_RGBW <= Light.subtype)) {
        ResponseAppend_P(PSTR(",\"" D_CMND_WHITE "\":%d"), light_state.getDimmer(2));
      }
      // Add CT
      if ((LST_COLDWARM == Light.subtype) || (LST_RGBCW == Light.subtype)) {
        ResponseAppend_P(PSTR(",\"" D_CMND_COLORTEMPERATURE "\":%d"), light_state.getCT());
      }
      // Add status for each channel
      ResponseAppend_P(PSTR(",\"" D_CMND_CHANNEL "\":[" ));
      for (uint32_t i = 0; i < Light.subtype; i++) {
        uint8_t channel_raw = Light.current_color[i];
        uint8_t channel = changeUIntScale(channel_raw,0,255,0,100);
        // if non null, force to be at least 1
        if ((0 == channel) && (channel_raw > 0)) { channel = 1; }
        ResponseAppend_P(PSTR("%s%d" ), (i > 0 ? "," : ""), channel);
      }
      ResponseAppend_P(PSTR("]"));
    }

    if (append) {
      if (Light.subtype >= LST_RGB) {
        ResponseAppend_P(PSTR(",\"" D_CMND_SCHEME "\":%d"), Settings.light_scheme);
      }
      if (Light.max_scheme > LS_MAX) {
        ResponseAppend_P(PSTR(",\"" D_CMND_WIDTH "\":%d"), Settings.light_width);
      }
      ResponseAppend_P(PSTR(",\"" D_CMND_FADE "\":\"%s\",\"" D_CMND_SPEED "\":%d,\"" D_CMND_LEDTABLE "\":\"%s\""),
        GetStateText(Settings.light_fade), Settings.light_speed, GetStateText(Settings.light_correction));
    }
  } else {  // Light.pwm_multi_channels
    for (uint32_t i = 0; i < Light.subtype; i++) {
      GetPowerDevice(scommand, Light.device + i, sizeof(scommand), 1);
      uint32_t light_power_masked = Light.power & (1 << i);    // the Light.power value for this device
      light_power_masked = light_power_masked ? 1 : 0;                    // convert to on/off
      ResponseAppend_P(PSTR("\"%s\":\"%s\",\"" D_CMND_CHANNEL "%d\":%d,"), scommand, GetStateText(light_power_masked), Light.device + i,
        changeUIntScale(Light.current_color[i], 0, 255, 0, 100));
    }
    ResponseAppend_P(PSTR("\"" D_CMND_COLOR "\":\"%s\""), LightGetColor(scolor));
  }   // Light.pwm_multi_channels

  if (!append) {
    ResponseJsonEnd();
  }
}

void LightPreparePower(power_t channels = 0xFFFFFFFF) {    // 1 = only RGB, 2 = only CT, 3 = both RGB and CT
#ifdef DEBUG_LIGHT
  AddLog_P2(LOG_LEVEL_DEBUG, "LightPreparePower power=%d Light.power=%d", power, Light.power);
#endif
  // If multi-channels, then we only switch off channels with a value of zero
  if (Light.pwm_multi_channels) {
    for (uint32_t i = 0; i < Light.subtype; i++) {
      if (bitRead(channels, i)) {
        // if channel is non-null, channel is supposed to be on, but it is off, do Power On
        if ((Light.current_color[i]) && (!bitRead(Light.power, i))) {
          if (!Settings.flag.not_power_linked) {  // SetOption20 - Control power in relation to Dimmer/Color/Ct changes
            ExecuteCommandPower(Light.device + i, POWER_ON_NO_STATE, SRC_LIGHT);
          }
        } else {
          // if channel is zero and channel is on, set it off
          if ((0 == Light.current_color[i]) && bitRead(Light.power, i)) {
            ExecuteCommandPower(Light.device + i, POWER_OFF_NO_STATE, SRC_LIGHT);
          }
        }
  #ifdef USE_DOMOTICZ
        DomoticzUpdatePowerState(Light.device + i);
  #endif  // USE_DOMOTICZ
      }
    }
  } else {
    if (light_controller.isCTRGBLinked()) {   // linked, standard
      if (light_state.getBri() && !(Light.power)) {
        if (!Settings.flag.not_power_linked) {  // SetOption20 - Control power in relation to Dimmer/Color/Ct changes
          ExecuteCommandPower(Light.device, POWER_ON_NO_STATE, SRC_LIGHT);
        }
      } else if (!light_state.getBri() && Light.power) {
        ExecuteCommandPower(Light.device, POWER_OFF_NO_STATE, SRC_LIGHT);
      }
    } else {
      // RGB
      if (channels & 1) {
        if (light_state.getBriRGB() && !(Light.power & 1)) {
          if (!Settings.flag.not_power_linked) {  // SetOption20 - Control power in relation to Dimmer/Color/Ct changes
            ExecuteCommandPower(Light.device, POWER_ON_NO_STATE, SRC_LIGHT);
          }
        } else if (!light_state.getBriRGB() && (Light.power & 1)) {
          ExecuteCommandPower(Light.device, POWER_OFF_NO_STATE, SRC_LIGHT);
        }
      }
      // White CT
      if (channels & 2) {
        if (light_state.getBriCT() && !(Light.power & 2)) {
          if (!Settings.flag.not_power_linked) {  // SetOption20 - Control power in relation to Dimmer/Color/Ct changes
            ExecuteCommandPower(Light.device + 1, POWER_ON_NO_STATE, SRC_LIGHT);
          }
        } else if (!light_state.getBriCT() && (Light.power & 2)) {
          ExecuteCommandPower(Light.device + 1, POWER_OFF_NO_STATE, SRC_LIGHT);
        }
      }
    }
#ifdef USE_DOMOTICZ
    DomoticzUpdatePowerState(Light.device);
#endif  // USE_DOMOTICZ
  }

  if (Settings.flag3.hass_tele_on_power) {  // SetOption59 - Send tele/%topic%/STATE in addition to stat/%topic%/RESULT
    MqttPublishTeleState();
  }

#ifdef DEBUG_LIGHT
  AddLog_P2(LOG_LEVEL_DEBUG, "LightPreparePower End power=%d Light.power=%d", power, Light.power);
#endif
  Light.power = power >> (Light.device - 1);  // reset next state, works also with unlinked RGB/CT
  ResponseLightState(0);
}

#ifdef USE_LIGHT_PALETTE
void LightSetPaletteEntry(void)
{
  uint8_t bri = light_state.getBri();
  uint8_t * palette_entry = &Light.palette[Light.wheel * LST_MAX];
  for (int i = 0; i < LST_MAX; i++) {
    Light.new_color[i] = changeUIntScale(palette_entry[i], 0, 255, 0, bri);
  }
  light_state.setChannelsRaw(Light.new_color);
  if (!Light.pwm_multi_channels) {
    light_state.setCW(Light.new_color[3], Light.new_color[4], true);
    if (Light.new_color[0] || Light.new_color[1] || Light.new_color[2]) light_state.addRGBMode();
  }
}
#endif  // USE_LIGHT_PALETTE

void LightCycleColor(int8_t direction)
{
//  if (Light.strip_timer_counter % (Settings.light_speed * 2)) { return; }  // Speed 1: 24sec, 2: 48sec, 3: 72sec, etc
  if (Settings.light_speed > 3) {
    if (Light.strip_timer_counter % (Settings.light_speed - 2)) { return; }  // Speed 4: 24sec, 5: 36sec, 6: 48sec, etc
  }

#ifdef USE_LIGHT_PALETTE
  if (Light.palette_count) {
    if (!Light.fade_running) {
      if (0 == direction) {
        Light.wheel = random(Light.palette_count);
      }
      else {
        Light.wheel += direction;
        if (Light.wheel >= Light.palette_count) {
          Light.wheel = 0;
          if (direction < 0) Light.wheel = Light.palette_count - 1;
        }
      }
      LightSetPaletteEntry();
    }
    return;
  }
#endif  // USE_LIGHT_PALETTE

  if (0 == direction) {
    if (Light.random == Light.wheel) {
      Light.random = random(255);

      uint8_t my_dir = (Light.random < Light.wheel -128) ? 1 :
                       (Light.random < Light.wheel     ) ? 0 :
                       (Light.random > Light.wheel +128) ? 0 : 1;  // Increment or Decrement and roll-over
      Light.random = (Light.random & 0xFE) | my_dir;

//      AddLog_P2(LOG_LEVEL_DEBUG, PSTR("LGT: random %d"), Light.random);
    }
//    direction = (Light.random < Light.wheel) ? -1 : 1;
    direction = (Light.random &0x01) ? 1 : -1;
  }

//  if (Settings.light_speed < 3) { direction <<= (3 - Settings.light_speed); }  // Speed 1: 12/4=3sec, 2: 12/2=6sec, 3: 12sec
  if (Settings.light_speed < 3) { direction *= (4 - Settings.light_speed); }  // Speed 1: 12/3=4sec, 2: 12/2=6sec, 3: 12sec
  Light.wheel += direction;
  uint16_t hue = changeUIntScale(Light.wheel, 0, 255, 0, 359);  // Scale to hue to keep amount of steps low (max 255 instead of 359)

//  AddLog_P2(LOG_LEVEL_DEBUG, PSTR("LGT: random %d, wheel %d, hue %d"), Light.random, Light.wheel, hue);

  if (!Light.pwm_multi_channels) {
    uint8_t sat;
    light_state.getHSB(nullptr, &sat, nullptr);  // Allow user control over Saturation
    light_state.setHS(hue, sat);
  } else {
    light_state.setHS(hue, 255);
    light_state.setBri(255);        // If multi-channel, force bri to max, it will be later dimmed to correct value
  }
  light_controller.calcLevels(Light.new_color);
}

void LightSetPower(void)
{
//  Light.power = XdrvMailbox.index;
  Light.old_power = Light.power;
  //Light.power = bitRead(XdrvMailbox.index, Light.device -1);
  uint32_t mask = 1;  // default mask
  if (Light.pwm_multi_channels) {
    mask = (1 << Light.subtype) - 1;   // wider mask
  } else if (!light_controller.isCTRGBLinked()) {
    mask = 3;   // we got 2 devices, for RGB and White
  }
  uint32_t shift = Light.device - 1;
  // If PWM multi_channels
  // Ex: 3 Relays and 4 PWM - devices_present = 7, Light.device = 4, Light.subtype = 4
  // Result: mask = 0b00001111 = 0x0F, shift = 3.
  // Power bits we consider are: 0b01111000 = 0x78
  // If regular situation: devices_present == Light.subtype
  Light.power = (XdrvMailbox.index & (mask << shift)) >> shift;
  if (Light.wakeup_active) {
    Light.wakeup_active--;
  }
#ifdef DEBUG_LIGHT
  AddLog_P2(LOG_LEVEL_DEBUG_MORE, "LightSetPower XdrvMailbox.index=%d Light.old_power=%d Light.power=%d mask=%d shift=%d",
    XdrvMailbox.index, Light.old_power, Light.power, mask, shift);
#endif
  if (Light.power != Light.old_power) {
    Light.update = true;
  }
  LightAnimate();
}

// On entry Light.new_color[5] contains the color to be displayed
// and Light.last_color[5] the color currently displayed
// Light.power tells which lights or channels (SetOption68) are on/off
void LightAnimate(void)
{
  uint16_t light_still_on = 0;
  bool power_off = false;

  // make sure we update CT range in case SetOption82 was changed
  light_controller.setAlexaCTRange(Settings.flag4.alexa_ct_range);
  Light.strip_timer_counter++;

  // set sleep parameter: either settings,
  // or set a maximum of PWM_MAX_SLEEP if light is on or Fade is running
  if (Light.power || Light.fade_running) {
    if (Settings.sleep > PWM_MAX_SLEEP) {
      ssleep = PWM_MAX_SLEEP;      // set a maxumum value of 50 milliseconds to ensure that animations are smooth
    } else {
      ssleep = Settings.sleep;     // or keep the current sleep if it's lower than 50
    }
  } else {
    ssleep = Settings.sleep;
  }

  if (!Light.power) {                   // All channels powered off
    Light.strip_timer_counter = 0;
    if (Settings.light_scheme >= LS_MAX) {
      power_off = true;
    }
  } else {
    switch (Settings.light_scheme) {
      case LS_POWER:
        light_controller.calcLevels(Light.new_color);
        break;
      case LS_WAKEUP:
        {
          if (2 == Light.wakeup_active) {
            Light.wakeup_active = 1;
            for (uint32_t i = 0; i < Light.subtype; i++) {
              Light.new_color[i] = 0;
            }
            Light.wakeup_start_time = millis();
          }
          // which step are we in a range 0..1023
          uint32_t step_10 = ((millis() - Light.wakeup_start_time) * 1023) / (Settings.light_wakeup * 1000);
          if (step_10 > 1023) { step_10 = 1023; }   // sanity check
          uint8_t wakeup_bri = changeUIntScale(step_10, 0, 1023, 0, LightStateClass::DimmerToBri(Settings.light_dimmer));

          if (wakeup_bri != light_state.getBri()) {
            light_state.setBri(wakeup_bri);
            light_controller.calcLevels();
            for (uint32_t i = 0; i < Light.subtype; i++) {
              Light.new_color[i] = Light.current_color[i];
            }
          }
          if (1023 == step_10) {
            Response_P(PSTR("{\"" D_CMND_WAKEUP "\":\"" D_JSON_DONE "\""));
            ResponseLightState(1);
            ResponseJsonEnd();
            MqttPublishPrefixTopicRulesProcess_P(RESULT_OR_STAT, PSTR(D_CMND_WAKEUP));

            Light.wakeup_active = 0;
            Settings.light_scheme = LS_POWER;
          }
        }
        break;
      case LS_CYCLEUP:
      case LS_CYCLEDN:
      case LS_RANDOM:
        if (LS_CYCLEUP == Settings.light_scheme) {
          LightCycleColor(1);
        } else if (LS_CYCLEDN == Settings.light_scheme) {
          LightCycleColor(-1);
        } else {
          LightCycleColor(0);
        }
        if (Light.pwm_multi_channels) {     // See #8058
          Light.new_color[0] = changeUIntScale(Light.new_color[0], 0, 255, 0, Settings.light_color[0]);
          Light.new_color[1] = changeUIntScale(Light.new_color[1], 0, 255, 0, Settings.light_color[1]);
          Light.new_color[2] = changeUIntScale(Light.new_color[2], 0, 255, 0, Settings.light_color[2]);
        }
        break;
      default:
        XlgtCall(FUNC_SET_SCHEME);
    }

#ifdef USE_DEVICE_GROUPS
    if (Settings.light_scheme != Light.last_scheme) {
      Light.last_scheme = Settings.light_scheme;
      SendLocalDeviceGroupMessage(DGR_MSGTYP_UPDATE, DGR_ITEM_LIGHT_SCHEME, Settings.light_scheme);
      Light.devgrp_no_channels_out = false;
    }
#endif  // USE_DEVICE_GROUPS
  }

  if ((Settings.light_scheme < LS_MAX) || power_off) {  // exclude WS281X Neopixel schemes

    // Apply power modifiers to Light.new_color
    LightApplyPower(Light.new_color, Light.power);

    // AddLog_P2(LOG_LEVEL_INFO, PSTR("last_color (%02X%02X%02X%02X%02X) new_color (%02X%02X%02X%02X%02X) power %d"),
    // Light.last_color[0], Light.last_color[1], Light.last_color[2], Light.last_color[3], Light.last_color[4],
    // Light.new_color[0], Light.new_color[1], Light.new_color[2], Light.new_color[3], Light.new_color[4],
    // Light.power
    // );

    if (memcmp(Light.last_color, Light.new_color, Light.subtype)) {
      Light.update = true;
    }
    if (Light.update) {
#ifdef USE_DEVICE_GROUPS
      if (Light.power) LightSendDeviceGroupStatus(false);
#endif  // USE_DEVICE_GROUPS

      uint16_t cur_col_10[LST_MAX];   // 10 bits resolution
      Light.update = false;
      bool rgbwwtable_applied = false;      // did we already applied RGBWWTable (ex: in white_blend_mode or virtual_ct)

      // first set 8 and 10 bits channels
      for (uint32_t i = 0; i < LST_MAX; i++) {
        Light.last_color[i] = Light.new_color[i];
        // Extend from 8 to 10 bits if no correction (in case no gamma correction is required)
        cur_col_10[i] = change8to10(Light.new_color[i]);
      }

      if (Light.pwm_multi_channels) {
        calcGammaMultiChannels(cur_col_10);
      } else {
        calcGammaBulbs(cur_col_10);

        // Now see if we need to mix RGB and True White
        // Valid only for LST_RGBW, LST_RGBCW, rgbwwTable[4] is zero, and white is zero (see doc)
        if ((LST_RGBW <= Light.subtype) && (Settings.flag4.white_blend_mode) && (0 == cur_col_10[3]+cur_col_10[4])) {
          uint32_t min_rgb_10 = min3(cur_col_10[0], cur_col_10[1], cur_col_10[2]);
          for (uint32_t i=0; i<3; i++) {
            // substract white and adjust according to rgbwwTable
            uint32_t adjust10 = change8to10(Settings.rgbwwTable[i]);
            cur_col_10[i] = changeUIntScale(cur_col_10[i] - min_rgb_10, 0, 1023, 0, adjust10);
          }

          // compute the adjusted white levels for 10 and 8 bits
          uint32_t adjust_w_10 = changeUIntScale(Settings.rgbwwTable[3], 0, 255, 0, 1023);
          uint32_t white_10 = changeUIntScale(min_rgb_10, 0, 1023, 0, adjust_w_10);  // set white power down corrected with rgbwwTable[3]
          if (LST_RGBW == Light.subtype) {
            // we simply set the white channel
            cur_col_10[3] = white_10;
          } else {  // LST_RGBCW
            // we distribute white between cold and warm according to CT value
            uint32_t ct = light_state.getCT10bits();
            cur_col_10[4] = changeUIntScale(ct, 0, 1023, 0, white_10);
            cur_col_10[3] = white_10 - cur_col_10[4];
          }
          rgbwwtable_applied = true;
        } else if ((Light.virtual_ct) && (0 == cur_col_10[0]+cur_col_10[1]+cur_col_10[2])) {
          // virtual_ct is on and we don't have any RGB set
          uint16_t sw_white = Settings.flag4.virtual_ct_cw ? cur_col_10[4] : cur_col_10[3];   // white power for virtual RGB
          uint16_t hw_white = Settings.flag4.virtual_ct_cw ? cur_col_10[3] : cur_col_10[4];   // white for hardware LED
          uint32_t adjust_sw = change8to10(Settings.flag4.virtual_ct_cw ? Settings.rgbwwTable[4] : Settings.rgbwwTable[3]);
          uint32_t adjust_hw = change8to10(Settings.flag4.virtual_ct_cw ? Settings.rgbwwTable[3] : Settings.rgbwwTable[4]);
          // set the target channels. Note: Gamma correction was arleady applied
          cur_col_10[3] = changeUIntScale(hw_white, 0, 1023, 0, adjust_hw);
          cur_col_10[4] = 0;          // we don't actually have a 5the channel
          sw_white = changeUIntScale(sw_white, 0, 1023, 0, adjust_sw);          // pre-adjust virtual channel
          for (uint32_t i=0; i<3; i++) {
            uint32_t adjust = change8to10(Settings.rgbwwTable[i]);
            cur_col_10[i] = changeUIntScale(sw_white, 0, 1023, 0, adjust);
          }
          rgbwwtable_applied = true;
        }
      }

      // Apply RGBWWTable only if not Settings.flag4.white_blend_mode
      if (!rgbwwtable_applied) {
        for (uint32_t i = 0; i<Light.subtype; i++) {
          uint32_t adjust = change8to10(Settings.rgbwwTable[i]);
          cur_col_10[i] = changeUIntScale(cur_col_10[i], 0, 1023, 0, adjust);
        }
      }

      // final adjusments for PMW ranges, post-gamma correction
      for (uint32_t i = 0; i < LST_MAX; i++) {
        // scale from 0..1023 to 0..pwm_range, but keep any non-zero value to at least 1
        cur_col_10[i] = (cur_col_10[i] > 0) ? changeUIntScale(cur_col_10[i], 1, 1023, 1, Settings.pwm_range) : 0;
      }

      // apply port remapping on both 8 bits and 10 bits versions
      uint16_t orig_col_10bits[LST_MAX];
      memcpy(orig_col_10bits, cur_col_10, sizeof(orig_col_10bits));
      for (uint32_t i = 0; i < LST_MAX; i++) {
        cur_col_10[i] = orig_col_10bits[Light.color_remap[i]];
      }

      if (!Settings.light_fade || skip_light_fade || power_off || (!Light.fade_initialized)) { // no fade
        // record the current value for a future Fade
        memcpy(Light.fade_start_10, cur_col_10, sizeof(Light.fade_start_10));
        // push the final values at 8 and 10 bits resolution to the PWMs
        LightSetOutputs(cur_col_10);
        Light.fade_initialized = true;      // it is now ok to fade
      } else {  // fade on
        if (Light.fade_running) {
          // if fade is running, we take the curring value as the start for the next fade
          memcpy(Light.fade_start_10, Light.fade_cur_10, sizeof(Light.fade_start_10));
        }
        memcpy(Light.fade_end_10, cur_col_10, sizeof(Light.fade_start_10));
        Light.fade_running = true;
        Light.fade_duration = 0;    // set the value to zero to force a recompute
        Light.fade_start = 0;
        // Fade will applied immediately below
      }
    }
    if (Light.fade_running) {
      if (LightApplyFade()) {
        // AddLog_P2(LOG_LEVEL_INFO, PSTR("LightApplyFade %d %d %d %d %d"),
        //   Light.fade_cur_10[0], Light.fade_cur_10[1], Light.fade_cur_10[2], Light.fade_cur_10[3], Light.fade_cur_10[4]);

        LightSetOutputs(Light.fade_cur_10);
      }
    }
#ifdef USE_PWM_DIMMER
    // If the power is off and the fade is done, turn the relay off.
    if (PWM_DIMMER == my_module_type && !Light.power && !Light.fade_running) PWMDimmerSetPower();
#endif  // USE_PWM_DIMMER
  }
}

bool isChannelGammaCorrected(uint32_t channel) {
  if (!Settings.light_correction) { return false; }   // Gamma correction not activated
  if (channel >= Light.subtype) { return false; }     // Out of range
#ifdef ESP8266
  if ((PHILIPS == my_module_type) || (Settings.flag4.pwm_ct_mode)) {
    if ((LST_COLDWARM == Light.subtype) && (1 == channel)) { return false; }   // PMW reserved for CT
    if ((LST_RGBCW == Light.subtype) && (4 == channel)) { return false; }   // PMW reserved for CT
  }
#endif  // ESP8266
  return true;
}

// is the channel a regular PWM or ColorTemp control
bool isChannelCT(uint32_t channel) {
#ifdef ESP8266
  if ((PHILIPS == my_module_type) || (Settings.flag4.pwm_ct_mode)) {
    if ((LST_COLDWARM == Light.subtype) && (1 == channel)) { return true; }   // PMW reserved for CT
    if ((LST_RGBCW == Light.subtype) && (4 == channel)) { return true; }   // PMW reserved for CT
  }
#endif  // ESP8266
  return false;
}

// Calculate the Gamma correction, if any, for fading, using the fast Gamma curve (10 bits in+out)
uint16_t fadeGamma(uint32_t channel, uint16_t v) {
  if (isChannelGammaCorrected(channel)) {
    return ledGamma_internal(v, gamma_table_fast);
  } else {
    return v;
  }
}
uint16_t fadeGammaReverse(uint32_t channel, uint16_t vg) {
  if (isChannelGammaCorrected(channel)) {
    return ledGammaReverse_internal(vg, gamma_table_fast);
  } else {
    return vg;
  }
}

bool LightApplyFade(void) {   // did the value chanegd and needs to be applied
  static uint32_t last_millis = 0;
  uint32_t now = millis();

  if ((now - last_millis) <= 5) {
    return false;     // the value was not changed in the last 5 milliseconds, ignore
  }
  last_millis = now;

  // Check if we need to calculate the duration
  if (0 == Light.fade_duration) {
    Light.fade_start = now;
    // compute the distance between start and and color (max of distance for each channel)
    uint32_t distance = 0;
    for (uint32_t i = 0; i < Light.subtype; i++) {
      int32_t channel_distance = fadeGammaReverse(i, Light.fade_end_10[i]) - fadeGammaReverse(i, Light.fade_start_10[i]);
      if (channel_distance < 0) { channel_distance = - channel_distance; }
      if (channel_distance > distance) { distance = channel_distance; }
    }
    if (distance > 0) {
      // compute the duration of the animation
      // Note: Settings.light_speed is the number of half-seconds for a 100% fade,
      // i.e. light_speed=1 means 1024 steps in 500ms
      Light.fade_duration = (distance * Settings.light_speed * 500) / 1023;
      if (Settings.save_data) {
        // Also postpone the save_data for the duration of the Fade (in seconds)
        uint32_t delay_seconds = 1 + (Light.fade_duration + 999) / 1000;   // add one more second
        // AddLog_P2(LOG_LEVEL_INFO, PSTR("delay_seconds %d, save_data_counter %d"), delay_seconds, save_data_counter);
        if (save_data_counter < delay_seconds) {
          save_data_counter = delay_seconds;      // pospone
        }
      }
    } else {
      // no fade needed, we keep the duration at zero, it will fallback directly to end of fade
      Light.fade_running = false;
    }
  }

  uint16_t fade_current = now - Light.fade_start;   // number of milliseconds since start of fade
  if (fade_current <= Light.fade_duration) {    // fade not finished
    //Serial.printf("Fade: %d / %d - ", fade_current, Light.fade_duration);
    for (uint32_t i = 0; i < Light.subtype; i++) {
      Light.fade_cur_10[i] = fadeGamma(i,
                                changeUIntScale(fadeGammaReverse(i, fade_current),
                                             0, Light.fade_duration,
                                             fadeGammaReverse(i, Light.fade_start_10[i]),
                                             fadeGammaReverse(i, Light.fade_end_10[i])));
      // Light.fade_cur_10[i] = changeUIntScale(fade_current,
      //                                        0, Light.fade_duration,
      //                                        Light.fade_start_10[i], Light.fade_end_10[i]);
    }
  } else {
    // stop fade
//AddLop_P2(LOG_LEVEL_DEBUG, PSTR("Stop fade"));
    Light.fade_running = false;
    Light.fade_start = 0;
    Light.fade_duration = 0;
    // set light to target value
    memcpy(Light.fade_cur_10, Light.fade_end_10, sizeof(Light.fade_end_10));
    // record the last value for next start
    memcpy(Light.fade_start_10, Light.fade_end_10, sizeof(Light.fade_start_10));
  }
  return true;
}

// On entry we take the 5 channels 8 bits entry, and we apply Power modifiers
// I.e. shut down channels that are powered down
void LightApplyPower(uint8_t new_color[LST_MAX], power_t power) {
  // If SetOption68, multi_channels
  if (Light.pwm_multi_channels) {
    // if multi-channels, specifically apply the Light.power bits
    for (uint32_t i = 0; i < LST_MAX; i++) {
      if (0 == bitRead(power,i)) {  // if power down bit is zero
        new_color[i] = 0;   // shut down this channel
      }
    }
    // #ifdef DEBUG_LIGHT
    // AddLog_P2(LOG_LEVEL_DEBUG_MORE, "Animate>> Light.power=%d Light.new_color=[%d,%d,%d,%d,%d]",
    //   Light.power, Light.new_color[0], Light.new_color[1], Light.new_color[2],
    //   Light.new_color[3], Light.new_color[4]);
    // #endif
  } else {
    if (!light_controller.isCTRGBLinked()) {
      // we have 2 power bits for RGB and White
      if (0 == (power & 1)) {
        new_color[0] = new_color[1] = new_color[2] = 0;
      }
      if (0 == (power & 2)) {
        new_color[3] = new_color[4] = 0;
      }
    } else if (!power) {
      for (uint32_t i = 0; i < LST_MAX; i++) {
        new_color[i] = 0;
      }
    }
  }
}

void LightSetOutputs(const uint16_t *cur_col_10) {
  // now apply the actual PWM values, adjusted and remapped 10-bits range
  if (light_type < LT_PWM6) {   // only for direct PWM lights, not for Tuya, Armtronix...
    for (uint32_t i = 0; i < (Light.subtype - Light.pwm_offset); i++) {
      if (PinUsed(GPIO_PWM1, i)) {
        //AddLog_P2(LOG_LEVEL_DEBUG, PSTR(D_LOG_APPLICATION "Cur_Col%d 10 bits %d"), i, cur_col_10[i]);
        uint16_t cur_col = cur_col_10[i + Light.pwm_offset];
        if (!isChannelCT(i)) {   // if CT don't use pwm_min and pwm_max
          cur_col = cur_col > 0 ? changeUIntScale(cur_col, 0, Settings.pwm_range, Light.pwm_min, Light.pwm_max) : 0;   // shrink to the range of pwm_min..pwm_max
        }
        if (!Settings.flag4.zerocross_dimmer) {
          analogWrite(Pin(GPIO_PWM1, i), bitRead(pwm_inverted, i) ? Settings.pwm_range - cur_col : cur_col);
        }
      }
    }
  }

//  char msg[24];
//  AddLog_P2(LOG_LEVEL_DEBUG, PSTR("LGT: Channels %s"), ToHex_P((const unsigned char *)cur_col_10, 10, msg, sizeof(msg)));

  uint8_t cur_col[LST_MAX];
  for (uint32_t i = 0; i < LST_MAX; i++) {
    cur_col[i] = change10to8(cur_col_10[i]);
  }
  // Some devices need scaled RGB like Sonoff L1
  // TODO, should be probably moved to the Sonoff L1 support code
  uint8_t scale_col[3];
  uint32_t max = (cur_col[0] > cur_col[1] && cur_col[0] > cur_col[2]) ? cur_col[0] : (cur_col[1] > cur_col[2]) ? cur_col[1] : cur_col[2];   // 0..255
  for (uint32_t i = 0; i < 3; i++) {
    scale_col[i] = (0 == max) ? 255 : (255 > max) ? changeUIntScale(cur_col[i], 0, max, 0, 255) : cur_col[i];
  }

  char *tmp_data = XdrvMailbox.data;
  char *tmp_topic = XdrvMailbox.topic;
  XdrvMailbox.data = (char*)cur_col;
  XdrvMailbox.topic = (char*)scale_col;
  if (XlgtCall(FUNC_SET_CHANNELS)) { /* Serviced */ }
  else if (XdrvCall(FUNC_SET_CHANNELS)) { /* Serviced */ }
  XdrvMailbox.data = tmp_data;
  XdrvMailbox.topic = tmp_topic;
}

// Just apply basic Gamma to each channel
void calcGammaMultiChannels(uint16_t cur_col_10[5]) {
  // Apply gamma correction for 8 and 10 bits resolutions, if needed
  if (Settings.light_correction) {
    for (uint32_t i = 0; i < LST_MAX; i++) {
      cur_col_10[i] = ledGamma10_10(cur_col_10[i]);
    }
  }
}

void calcGammaBulbs(uint16_t cur_col_10[5]) {
  // Apply gamma correction for 8 and 10 bits resolutions, if needed

  // First apply combined correction to the overall white power
  if ((LST_COLDWARM == Light.subtype) || (LST_RGBCW == Light.subtype)) {
    // channels for white are always the last two channels
    uint32_t cw1 = Light.subtype - 1;       // address for the ColorTone PWM
    uint32_t cw0 = Light.subtype - 2;       // address for the White Brightness PWM
    uint16_t white_bri10 = cur_col_10[cw0] + cur_col_10[cw1];   // cumulated brightness
    uint16_t white_bri10_1023 = (white_bri10 > 1023) ? 1023 : white_bri10;    // max 1023

#ifdef ESP8266
    if ((PHILIPS == my_module_type) || (Settings.flag4.pwm_ct_mode)) {   // channel 1 is the color tone, mapped to cold channel (0..255)
      // Xiaomi Philips bulbs follow a different scheme:
      cur_col_10[cw1] = light_state.getCT10bits();
      // channel 0=intensity, channel1=temperature
      if (Settings.light_correction) { // gamma correction
        cur_col_10[cw0] = ledGamma10_10(white_bri10_1023);    // 10 bits gamma correction
      } else {
        cur_col_10[cw0] = white_bri10_1023;  // no gamma, extend to 10 bits
      }
    } else
#endif  // ESP8266
    if (Settings.light_correction) {
      // if sum of both channels is > 255, then channels are probably uncorrelated
      if (white_bri10 <= 1031) {      // take a margin of 8 above 1023 to account for rounding errors
        // we calculate the gamma corrected sum of CW + WW
        uint16_t white_bri_gamma10 = ledGamma10_10(white_bri10_1023);
        // then we split the total energy among the cold and warm leds
        cur_col_10[cw0] = changeUIntScale(cur_col_10[cw0], 0, white_bri10_1023, 0, white_bri_gamma10);
        cur_col_10[cw1] = changeUIntScale(cur_col_10[cw1], 0, white_bri10_1023, 0, white_bri_gamma10);
      } else {
        cur_col_10[cw0] = ledGamma10_10(cur_col_10[cw0]);
        cur_col_10[cw1] = ledGamma10_10(cur_col_10[cw1]);
      }
    }
  }

  if (Settings.light_correction) {
    // then apply gamma correction to RGB channels
    if (LST_RGB <= Light.subtype) {
      for (uint32_t i = 0; i < 3; i++) {
        cur_col_10[i] = ledGamma10_10(cur_col_10[i]);
      }
    }
    // If RGBW or Single channel, also adjust White channel
    if ((LST_SINGLE == Light.subtype) || (LST_RGBW == Light.subtype)) {
      cur_col_10[Light.subtype - 1] = ledGamma10_10(cur_col_10[Light.subtype - 1]);
    }
  }
}

#ifdef USE_DEVICE_GROUPS
void LightSendDeviceGroupStatus(bool status)
{
  static uint8_t last_bri;
  uint8_t bri = light_state.getBri();
  bool send_bri_update = (status || bri != last_bri);
  if (Light.subtype > LST_SINGLE && !Light.devgrp_no_channels_out) {
    static uint8_t channels[LST_MAX + 1] = { 0, 0, 0, 0, 0, 0 };
    if (status) {
      light_state.getChannels(channels);
    }
    else {
      memcpy(channels, Light.new_color, LST_MAX);
      channels[LST_MAX]++;
    }
    SendLocalDeviceGroupMessage((send_bri_update ? DGR_MSGTYP_PARTIAL_UPDATE : DGR_MSGTYP_UPDATE), DGR_ITEM_LIGHT_CHANNELS, channels);
  }
  if (send_bri_update) {
    last_bri = bri;
    SendLocalDeviceGroupMessage(DGR_MSGTYP_UPDATE, DGR_ITEM_LIGHT_BRI, light_state.getBri());
  }
}

void LightHandleDevGroupItem(void)
{
  static bool send_state = false;
  static bool restore_power = false;
  bool more_to_come;
  uint32_t value = XdrvMailbox.payload;
#ifdef USE_PWM_DIMMER_REMOTE
  if (*XdrvMailbox.topic) return; // Ignore updates from other device groups
#endif  // USE_PWM_DIMMER_REMOTE
  switch (XdrvMailbox.command_code) {
    case DGR_ITEM_EOL:
      more_to_come = (XdrvMailbox.index & DGR_FLAG_MORE_TO_COME);
      if (restore_power && !more_to_come) {
        restore_power = false;
        Light.power = Light.old_power;
      }

      LightAnimate();

      if (send_state && !more_to_come) {
        light_controller.saveSettings();
        if (Settings.flag3.hass_tele_on_power) {  // SetOption59 - Send tele/%topic%/STATE in addition to stat/%topic%/RESULT
          MqttPublishTeleState();
        }
        send_state = false;
      }
      break;
    case DGR_ITEM_LIGHT_BRI:
      if (light_state.getBri() != value) {
        light_state.setBri(value);
        send_state = true;
      }
      break;
    case DGR_ITEM_LIGHT_SCHEME:
      if (Settings.light_scheme != value) {
        Light.last_scheme = Settings.light_scheme = value;
        Light.devgrp_no_channels_out = (value != 0);
        send_state = true;
      }
      break;
    case DGR_ITEM_LIGHT_CHANNELS:
#ifdef USE_DGR_LIGHT_SEQUENCE
      {
        static uint8_t last_sequence = 0;

        // If a sequence offset is set, set the channels to the ones we received <SequenceOffset>
        // changes ago.
        if (Light.sequence_offset) {
          light_controller.changeChannels(Light.channels_fifo);

          // Shift the fifo down and load the newly received channels at the end for this update and
          // any updates we missed.
          int last_entry = (Light.sequence_offset - 1) * LST_MAX;
          for (uint8_t sequence = (uint8_t)XdrvMailbox.data[LST_MAX]; (uint8_t)(sequence - last_sequence) > 0; last_sequence++) {
            memmove(Light.channels_fifo, &Light.channels_fifo[LST_MAX], last_entry);
            memcpy(&Light.channels_fifo[last_entry], XdrvMailbox.data, LST_MAX);
          }
        }
        else {
#endif  // USE_DGR_LIGHT_SEQUENCE
          light_controller.changeChannels((uint8_t *)XdrvMailbox.data);
#ifdef USE_DGR_LIGHT_SEQUENCE
        }
      }
#endif  // USE_DGR_LIGHT_SEQUENCE
      send_state = true;
      break;
    case DGR_ITEM_LIGHT_FIXED_COLOR:
      if (Light.subtype >= LST_RGBW) {
        send_state = true;
#ifdef USE_LIGHT_PALETTE
        if (Light.palette_count) {
          Light.wheel = value % Light.palette_count;
          LightSetPaletteEntry();
          break;
        }
#endif  // !USE_LIGHT_PALETTE
        value = value % MAX_FIXED_COLOR;
        if (value) {
          bool save_decimal_text = Settings.flag.decimal_text;
          char str[16];
          LightColorEntry(str, sprintf_P(str, PSTR("%u"), value));
          Settings.flag.decimal_text = save_decimal_text;
          uint32_t old_bri = light_state.getBri();
          light_controller.changeChannels(Light.entry_color);
          light_controller.changeBri(old_bri);
          Settings.light_scheme = 0;
          Light.devgrp_no_channels_out = false;
        }
        else {
          light_state.setColorMode(LCM_CT);
        }
        if (!restore_power && !Light.power) {
          Light.old_power = Light.power;
          Light.power = 0xff;
          restore_power = true;
        }
      }
      break;
    case DGR_ITEM_LIGHT_FADE:
      if (Settings.light_fade != value) {
        Settings.light_fade = value;
        send_state = true;
      }
      break;
    case DGR_ITEM_LIGHT_SPEED:
      if (Settings.light_speed != value && value > 0 && value <= 40) {
        Settings.light_speed = value;
        send_state = true;
      }
      break;
    case DGR_ITEM_STATUS:
      SendLocalDeviceGroupMessage(DGR_MSGTYP_PARTIAL_UPDATE, DGR_ITEM_LIGHT_FADE, Settings.light_fade,
        DGR_ITEM_LIGHT_SPEED, Settings.light_speed, DGR_ITEM_LIGHT_SCHEME, Settings.light_scheme);
      LightSendDeviceGroupStatus(true);
      break;
  }
}
#endif  // USE_DEVICE_GROUPS

/*********************************************************************************************\
 * Commands
\*********************************************************************************************/

bool LightColorEntry(char *buffer, uint32_t buffer_length)
{
  char scolor[10];
  char *p;
  char *str;
  uint32_t entry_type = 0;                          // Invalid
  uint8_t value = Light.fixed_color_index;
#ifdef USE_LIGHT_PALETTE
  if (Light.palette_count) value = Light.wheel;
#endif  // USE_LIGHT_PALETTE

  if (buffer[0] == '#') {                           // Optional hexadecimal entry
    buffer++;
    buffer_length--;
  }

  if (Light.subtype >= LST_RGB) {
    char option = (1 == buffer_length) ? buffer[0] : '\0';
    if ('+' == option) {
#ifdef USE_LIGHT_PALETTE
      if (Light.palette_count || Light.fixed_color_index < MAX_FIXED_COLOR) {
#else // USE_LIGHT_PALETTE
      if (Light.fixed_color_index < MAX_FIXED_COLOR) {
#endif  // !USE_LIGHT_PALETTE
        value++;
      }
    }
    else if ('-' == option) {
#ifdef USE_LIGHT_PALETTE
      if (Light.palette_count || Light.fixed_color_index > 1) {
#else // USE_LIGHT_PALETTE
      if (Light.fixed_color_index > 1) {
#endif  // !USE_LIGHT_PALETTE
        value--;
      }
    } else {
      value = atoi(buffer);
    }
#ifdef USE_LIGHT_PALETTE
    if (Light.palette_count) value = value % Light.palette_count;
#endif  // USE_LIGHT_PALETTE
  }

  memset(&Light.entry_color, 0x00, sizeof(Light.entry_color));
  // erase all channels except if the last character is '=', #6799
  while ((buffer_length > 0) && ('=' == buffer[buffer_length - 1])) {
    buffer_length--;  // remove all trailing '='
    memcpy(&Light.entry_color, &Light.current_color, sizeof(Light.entry_color));
  }
  if (strstr(buffer, ",") != nullptr) {             // Decimal entry
    int8_t i = 0;
    for (str = strtok_r(buffer, ",", &p); str && i < 6; str = strtok_r(nullptr, ",", &p)) {
      if (i < LST_MAX) {
        Light.entry_color[i++] = atoi(str);
      }
    }
    entry_type = 2;                                 // Decimal
  }
  else if (((2 * Light.subtype) == buffer_length) || (buffer_length > 3)) {  // Hexadecimal entry
    for (uint32_t i = 0; i < tmin((uint)(buffer_length / 2), sizeof(Light.entry_color)); i++) {
      strlcpy(scolor, buffer + (i *2), 3);
      Light.entry_color[i] = (uint8_t)strtol(scolor, &p, 16);
    }
    entry_type = 1;                                 // Hexadecimal
  }
#ifdef USE_LIGHT_PALETTE
  else if (Light.palette_count) {
    value--;
    Light.wheel = value;
    memcpy_P(&Light.entry_color, &Light.palette[value * LST_MAX], LST_MAX);
    entry_type = 1;                                 // Hexadecimal
  }
#endif  // USE_LIGHT_PALETTE
  else if ((Light.subtype >= LST_RGB) && (value > 0) && (value <= MAX_FIXED_COLOR)) {
    Light.fixed_color_index = value;
    memcpy_P(&Light.entry_color, &kFixedColor[value -1], 3);
    entry_type = 1;                                 // Hexadecimal
  }
  else if ((value > 199) && (value <= 199 + MAX_FIXED_COLD_WARM)) {
    if (LST_RGBW == Light.subtype) {
      memcpy_P(&Light.entry_color[3], &kFixedWhite[value -200], 1);
      entry_type = 1;                               // Hexadecimal
    }
    else if (LST_COLDWARM == Light.subtype) {
      memcpy_P(&Light.entry_color, &kFixedColdWarm[value -200], 2);
      entry_type = 1;                               // Hexadecimal
    }
    else if (LST_RGBCW == Light.subtype) {
      memcpy_P(&Light.entry_color[3], &kFixedColdWarm[value -200], 2);
      entry_type = 1;                               // Hexadecimal
    }
  }
  if (entry_type) {
    Settings.flag.decimal_text = entry_type -1;     // SetOption17 - Switch between decimal or hexadecimal output
  }
  return (entry_type);
}

/********************************************************************************************/

void CmndSupportColor(void)
{
  bool valid_entry = false;
  bool coldim = false;

  if (XdrvMailbox.data_len > 0) {
    valid_entry = LightColorEntry(XdrvMailbox.data, XdrvMailbox.data_len);
    if (valid_entry) {
      if (XdrvMailbox.index <= 2) {    // Color(1), 2
#ifdef USE_LIGHT_PALETTE
        if (Light.palette_count && XdrvMailbox.index == 2) {
          LightSetPaletteEntry();
        }
        else {
#endif  // USE_LIGHT_PALETTE
          uint32_t old_bri = light_state.getBri();
          // change all channels to specified values
          light_controller.changeChannels(Light.entry_color);
          if (2 == XdrvMailbox.index) {
            // If Color2, set back old brightness
            light_controller.changeBri(old_bri);
          }
#ifdef USE_LIGHT_PALETTE
        }
#endif  // USE_LIGHT_PALETTE
        Settings.light_scheme = 0;
        coldim = true;
      } else {             // Color3, 4, 5 and 6
        for (uint32_t i = 0; i < LST_RGB; i++) {
          Settings.ws_color[XdrvMailbox.index -3][i] = Light.entry_color[i];
        }
      }
    }
  }
  char scolor[LIGHT_COLOR_SIZE];
  if (!valid_entry && (XdrvMailbox.index <= 2)) {
    ResponseCmndChar(LightGetColor(scolor));
  }
  if (XdrvMailbox.index >= 3) {
    scolor[0] = '\0';
    for (uint32_t i = 0; i < LST_RGB; i++) {
      if (Settings.flag.decimal_text) {  // SetOption17 - Switch between decimal or hexadecimal output
        snprintf_P(scolor, sizeof(scolor), PSTR("%s%s%d"), scolor, (i > 0) ? "," : "", Settings.ws_color[XdrvMailbox.index -3][i]);
      } else {
        snprintf_P(scolor, sizeof(scolor), PSTR("%s%02X"), scolor, Settings.ws_color[XdrvMailbox.index -3][i]);
      }
    }
    ResponseCmndIdxChar(scolor);
  }
  if (coldim) {
    LightPreparePower();    // no parameter, recalculate Power for all channels
  }
}

void CmndColor(void)
{
  // Color  - Show current RGBWW color state
  // Color1 - Change color to RGBWW
  // Color2 - Change color to RGBWW but retain brightness (=dimmer)
  // Color3 - Change color to RGB of WS2812 Clock Second
  // Color4 - Change color to RGB of WS2812 Clock Minute
  // Color5 - Change color to RGB of WS2812 Clock Hour
  // Color6 - Change color to RGB of WS2812 Clock Marker
  if ((Light.subtype > LST_SINGLE) && (XdrvMailbox.index > 0) && (XdrvMailbox.index <= 6)) {
    CmndSupportColor();
  }
}

void CmndWhite(void)
{
  // White        - Show current White (=Dimmer2) state
  // White 0..100 - Set White colors dimmer state
  if (Light.pwm_multi_channels) { return; }
  if ( ((Light.subtype >= LST_RGBW) || (LST_COLDWARM == Light.subtype)) && (XdrvMailbox.index == 1)) {
    if ((XdrvMailbox.payload >= 0) && (XdrvMailbox.payload <= 100)) {
      light_controller.changeDimmer(XdrvMailbox.payload, 2);
      LightPreparePower(2);
    } else {
      ResponseCmndNumber(light_state.getDimmer(2));
    }
  }
}

void CmndChannel(void)
{
  // Channel<x>        - Show current Channel state
  // Channel<x> 0..100 - Set Channel dimmer state
  // Channel<x> +      - Incerement Channel in steps of 10
  // Channel<x> -      - Decrement Channel in steps of 10
  if ((XdrvMailbox.index >= Light.device) && (XdrvMailbox.index < Light.device + Light.subtype )) {
    uint32_t light_index = XdrvMailbox.index - Light.device;
    power_t coldim = 0;   // bit flag to update

    // Handle +/- special command
    if (1 == XdrvMailbox.data_len) {
      uint8_t channel = changeUIntScale(Light.current_color[light_index],0,255,0,100);
      if ('+' == XdrvMailbox.data[0]) {
        XdrvMailbox.payload = (channel > 89) ? 100 : channel + 10;
      } else if ('-' == XdrvMailbox.data[0]) {
        XdrvMailbox.payload = (channel < 11) ? 1 : channel - 10;
      }
    }

    //  Set "Channel" directly - this allows Color and Direct PWM control to coexist
    if ((XdrvMailbox.payload >= 0) && (XdrvMailbox.payload <= 100)) {
      Light.current_color[light_index] = changeUIntScale(XdrvMailbox.payload,0,100,0,255);
      if (Light.pwm_multi_channels) {
        coldim = 1 << light_index;      // change the specified channel
      } else {
        if (light_controller.isCTRGBLinked()) {
          // if we change channels 1,2,3 then turn off CT mode (unless non-linked)
          if ((light_index < 3) && (light_controller.isCTRGBLinked())) {
            Light.current_color[3] = Light.current_color[4] = 0;
          } else {
            Light.current_color[0] = Light.current_color[1] = Light.current_color[2] = 0;
          }
          coldim = 1;
        } else {
          if (light_index < 3) { coldim = 1; }    // RGB
          else { coldim = 2; }                    // CT
        }
      }
      light_controller.changeChannels(Light.current_color);
    }
    ResponseCmndIdxNumber(changeUIntScale(Light.current_color[light_index],0,255,0,100));
    if (coldim) {
      LightPreparePower(coldim);
    }
  }
}

void CmndHsbColor(void)
{
  // HsbColor             - Show current HSB
  // HsbColor 360,100,100 - Set Hue, Saturation and Brighthness
  // HsbColor 360,100     - Set Hue and Saturation
  // HsbColor 360         - Set Hue
  // HsbColor1 360        - Set Hue
  // HsbColor2 100        - Set Saturation
  // HsbColor3 100        - Set Brightness
  if (Light.subtype >= LST_RGB) {
    if (XdrvMailbox.data_len > 0) {
      uint16_t c_hue;
      uint8_t  c_sat;
      light_state.getHSB(&c_hue, &c_sat, nullptr);
      uint32_t HSB[3];
      HSB[0] = c_hue;
      HSB[1] = c_sat;
      HSB[2] = light_state.getBriRGB();
      if ((2 == XdrvMailbox.index) || (3 == XdrvMailbox.index)) {
        if ((uint32_t)XdrvMailbox.payload > 100) { XdrvMailbox.payload = 100; }
        HSB[XdrvMailbox.index-1] = changeUIntScale(XdrvMailbox.payload, 0, 100, 0, 255);
      } else {
        uint32_t paramcount = ParseParameters(3, HSB);
        if (HSB[0] > 360) { HSB[0] = 360; }
        for (uint32_t i = 1; i < paramcount; i++) {
          if (HSB[i] > 100) { HSB[i] == 100; }
          HSB[i] = changeUIntScale(HSB[i], 0, 100, 0, 255); // change sat and bri to 0..255
        }
      }
      light_controller.changeHSB(HSB[0], HSB[1], HSB[2]);
      LightPreparePower(1);
    } else {
      ResponseLightState(0);
    }
  }
}

void CmndScheme(void)
{
  // Scheme 0..12  - Select one of schemes 0 to 12
  // Scheme 2      - Select scheme 2
  // Scheme 2,0    - Select scheme 2 with color wheel set to 0 (HSB Red)
  // Scheme +      - Select next scheme
  // Scheme -      - Select previous scheme
  if (Light.subtype >= LST_RGB) {
    uint32_t max_scheme = Light.max_scheme;

    if (1 == XdrvMailbox.data_len) {
      if (('+' == XdrvMailbox.data[0]) && (Settings.light_scheme < max_scheme)) {
        XdrvMailbox.payload = Settings.light_scheme + ((0 == Settings.light_scheme) ? 2 : 1);  // Skip wakeup
      }
      else if (('-' == XdrvMailbox.data[0]) && (Settings.light_scheme > 0)) {
        XdrvMailbox.payload = Settings.light_scheme - ((2 == Settings.light_scheme) ? 2 : 1);  // Skip wakeup
      }
    }
    if ((XdrvMailbox.payload >= 0) && (XdrvMailbox.payload <= max_scheme)) {
      uint32_t parm[2];
      if (ParseParameters(2, parm) > 1) {
        Light.wheel = parm[1];
#ifdef USE_LIGHT_PALETTE
        Light.wheel--;
#endif  // USE_LIGHT_PALETTE
      }
      Settings.light_scheme = XdrvMailbox.payload;
      if (LS_WAKEUP == Settings.light_scheme) {
        Light.wakeup_active = 3;
      }
      LightPowerOn();
      Light.strip_timer_counter = 0;
      // Publish state message for Hass
      if (Settings.flag3.hass_tele_on_power) {  // SetOption59 - Send tele/%topic%/STATE in addition to stat/%topic%/RESULT
        MqttPublishTeleState();
      }
    }
    ResponseCmndNumber(Settings.light_scheme);
  }
}

void CmndWakeup(void)
{
  // Wakeup        - Start wakeup light
  // Wakeup 0..100 - Start wakeup light to dimmer value 0..100
  if ((XdrvMailbox.payload >= 0) && (XdrvMailbox.payload <= 100)) {
    light_controller.changeDimmer(XdrvMailbox.payload);
  }
  Light.wakeup_active = 3;
  Settings.light_scheme = LS_WAKEUP;
  LightPowerOn();
  ResponseCmndChar(D_JSON_STARTED);
}

void CmndColorTemperature(void)
{
  // CT          - Show current color temperature
  // CT 153..500 - Set color temperature
  // CT +        - Incerement color temperature in steps of 34
  // CT -        - Decrement color temperature in steps of 34
  if (Light.pwm_multi_channels) { return; }
  if ((LST_COLDWARM == Light.subtype) || (LST_RGBCW == Light.subtype)) { // ColorTemp
    uint32_t ct = light_state.getCT();
    if (1 == XdrvMailbox.data_len) {
      if ('+' == XdrvMailbox.data[0]) {
        XdrvMailbox.payload = (ct > (CT_MAX-34)) ? CT_MAX : ct + 34;
      }
      else if ('-' == XdrvMailbox.data[0]) {
        XdrvMailbox.payload = (ct < (CT_MIN+34)) ? CT_MIN : ct - 34;
      }
    }
    if ((XdrvMailbox.payload >= CT_MIN) && (XdrvMailbox.payload <= CT_MAX)) {  // https://developers.meethue.com/documentation/core-concepts
      light_controller.changeCTB(XdrvMailbox.payload, light_state.getBriCT());
      LightPreparePower(2);
    } else {
      ResponseCmndNumber(ct);
    }
  }
}

void LightDimmerOffset(uint32_t index, int32_t offset) {
  int32_t dimmer = light_state.getDimmer(index) + offset;
  if (dimmer < 1) { dimmer = Settings.flag3.slider_dimmer_stay_on; }  // SetOption77 - Do not power off if slider moved to far left
  if (dimmer > 100) { dimmer = 100; }

  XdrvMailbox.index = index;
  XdrvMailbox.payload = dimmer;
  CmndDimmer();
}

void CmndDimmer(void)
{
  // Dimmer         - Show current Dimmer state
  // Dimmer0 0..100 - Change both RGB and W(W) Dimmers
  // Dimmer1 0..100 - Change RGB Dimmer
  // Dimmer2 0..100 - Change W(W) Dimmer
  // Dimmer3 0..100 - Change both RGB and W(W) Dimmers with no fading
  // Dimmer<x> +    - Incerement Dimmer in steps of 10
  // Dimmer<x> -    - Decrement Dimmer in steps of 10
  uint32_t dimmer;
  if (XdrvMailbox.index == 3) {
    skip_light_fade = true;
    XdrvMailbox.index = 0;
  }
  else if (XdrvMailbox.index > 2) {
    XdrvMailbox.index = 1;
  }

  if ((light_controller.isCTRGBLinked()) || (0 == XdrvMailbox.index)) {
    dimmer = light_state.getDimmer();
  } else {
    dimmer = light_state.getDimmer(XdrvMailbox.index);
  }
  // Handle +/- special command
  if (1 == XdrvMailbox.data_len) {
    if ('+' == XdrvMailbox.data[0]) {
      XdrvMailbox.payload = (dimmer > 89) ? 100 : dimmer + 10;
    } else if ('-' == XdrvMailbox.data[0]) {
      XdrvMailbox.payload = (dimmer < 11) ? 1 : dimmer - 10;
    }
  }
  // If value is ok, change it, otherwise report old value
  if ((XdrvMailbox.payload >= 0) && (XdrvMailbox.payload <= 100)) {
    if (light_controller.isCTRGBLinked()) {
      // normal state, linked RGB and CW
      light_controller.changeDimmer(XdrvMailbox.payload);
      LightPreparePower();
    } else {
      if (0 != XdrvMailbox.index) {
        light_controller.changeDimmer(XdrvMailbox.payload, XdrvMailbox.index);
        LightPreparePower(1 << (XdrvMailbox.index - 1));    // recalculate only the target dimmer
      } else {
        // change both dimmers
        light_controller.changeDimmer(XdrvMailbox.payload, 1);
        light_controller.changeDimmer(XdrvMailbox.payload, 2);
        LightPreparePower();
      }
    }
#if defined(USE_PWM_DIMMER) && defined(USE_DEVICE_GROUPS)
    uint8_t bri = light_state.getBri();
    if (bri != Settings.bri_power_on) {
      Settings.bri_power_on = bri;
      SendLocalDeviceGroupMessage(DGR_MSGTYP_PARTIAL_UPDATE, DGR_ITEM_BRI_POWER_ON, Settings.bri_power_on);
    }
#endif  // USE_PWM_DIMMER && USE_DEVICE_GROUPS
    Light.update = true;
    if (skip_light_fade) LightAnimate();
  } else {
    ResponseCmndNumber(dimmer);
  }
  skip_light_fade = false;
}

void CmndDimmerRange(void)
{
  // DimmerRange       - Show current dimmer range as used by Tuya and PS16DZ Dimmers
  // DimmerRange 0,100 - Set dimmer hardware range from 0 to 100 and restart
  if (XdrvMailbox.data_len > 0) {
    uint32_t parm[2];
    parm[0] = Settings.dimmer_hw_min;
    parm[1] = Settings.dimmer_hw_max;
    ParseParameters(2, parm);
    if (parm[0] < parm[1]) {
      Settings.dimmer_hw_min = parm[0];
      Settings.dimmer_hw_max = parm[1];
    } else {
      Settings.dimmer_hw_min = parm[1];
      Settings.dimmer_hw_max = parm[0];
    }
    LightCalcPWMRange();
    Light.update = true;
  }
  Response_P(PSTR("{\"" D_CMND_DIMMER_RANGE "\":{\"Min\":%d,\"Max\":%d}}"), Settings.dimmer_hw_min, Settings.dimmer_hw_max);
}

void CmndLedTable(void)
{
  // LedTable        - Show current LedTable state
  // LedTable 0      - Turn LedTable Off
  // LedTable On     - Turn LedTable On
  // LedTable Toggle - Toggle LedTable state
  if ((XdrvMailbox.payload >= 0) && (XdrvMailbox.payload <= 2)) {
    switch (XdrvMailbox.payload) {
    case 0: // Off
    case 1: // On
      Settings.light_correction = XdrvMailbox.payload;
      break;
    case 2: // Toggle
      Settings.light_correction ^= 1;
      break;
    }
    LightCalcPWMRange();
    Light.update = true;
  }
  ResponseCmndStateText(Settings.light_correction);
}

void CmndRgbwwTable(void)
{
  // RgbWwTable                     - Show current RGBWW State
  // RgbWwTable 255,255,255,255,255 - Set RGBWW state to maximum
  if ((XdrvMailbox.data_len > 0)) {
    uint32_t parm[LST_RGBCW -1];
    uint32_t parmcount = ParseParameters(LST_RGBCW, parm);
    for (uint32_t i = 0; i < parmcount; i++) {
      Settings.rgbwwTable[i] = parm[i];
    }
    Light.update = true;
  }
  char scolor[LIGHT_COLOR_SIZE];
  scolor[0] = '\0';
  for (uint32_t i = 0; i < LST_RGBCW; i++) {
    snprintf_P(scolor, sizeof(scolor), PSTR("%s%s%d"), scolor, (i > 0) ? "," : "", Settings.rgbwwTable[i]);
  }
  ResponseCmndChar(scolor);
}

void CmndFade(void)
{
  // Fade        - Show current Fade state
  // Fade 0      - Turn Fade Off
  // Fade On     - Turn Fade On
  // Fade Toggle - Toggle Fade state
  switch (XdrvMailbox.payload) {
  case 0: // Off
  case 1: // On
    Settings.light_fade = XdrvMailbox.payload;
    break;
  case 2: // Toggle
    Settings.light_fade ^= 1;
    break;
  }
#ifdef USE_DEVICE_GROUPS
  if (XdrvMailbox.payload >= 0 && XdrvMailbox.payload <= 2) SendLocalDeviceGroupMessage(DGR_MSGTYP_UPDATE, DGR_ITEM_LIGHT_FADE, Settings.light_fade);
#endif  // USE_DEVICE_GROUPS
#ifdef USE_LIGHT
  if (!Settings.light_fade) { Light.fade_running = false; }
#endif  // USE_LIGHT
  ResponseCmndStateText(Settings.light_fade);
}

void CmndSpeed(void)
{
  // Speed 1  - Fast
  // Speed 40 - Very slow
  // Speed +  - Increment Speed
  // Speed -  - Decrement Speed
  if (1 == XdrvMailbox.data_len) {
    if (('+' == XdrvMailbox.data[0]) && (Settings.light_speed > 1)) {
      XdrvMailbox.payload = Settings.light_speed - 1;
    }
    else if (('-' == XdrvMailbox.data[0]) && (Settings.light_speed < 40)) {
      XdrvMailbox.payload = Settings.light_speed + 1;
    }
  }
  if ((XdrvMailbox.payload > 0) && (XdrvMailbox.payload <= 40)) {
    Settings.light_speed = XdrvMailbox.payload;
#ifdef USE_DEVICE_GROUPS
    SendLocalDeviceGroupMessage(DGR_MSGTYP_UPDATE, DGR_ITEM_LIGHT_SPEED, Settings.light_speed);
#endif  // USE_DEVICE_GROUPS
  }
  ResponseCmndNumber(Settings.light_speed);
}

void CmndWakeupDuration(void)
{
  // WakeUpDuration    - Show current Wake Up duration in seconds
  // WakeUpDuration 60 - Set Wake Up duration to 60 seconds
  if ((XdrvMailbox.payload > 0) && (XdrvMailbox.payload < 3001)) {
    Settings.light_wakeup = XdrvMailbox.payload;
    Light.wakeup_active = 0;
  }
  ResponseCmndNumber(Settings.light_wakeup);
}

#ifdef USE_LIGHT_PALETTE
void CmndPalette(void)
{
  uint8_t * palette_entry;
  char * p;

  // Palette Color[ ...]
  if (XdrvMailbox.data_len) {
    Light.wheel = 0;
    Light.palette_count = 0;
    if (Light.palette) {
      free(Light.palette);
      Light.palette = nullptr;
    }
    if (XdrvMailbox.data_len > 1 || XdrvMailbox.data[0] != '0') {
      uint8_t palette_count = 0;
      char * color = XdrvMailbox.data;
      if (!(Light.palette = (uint8_t *)malloc(255 * Light.subtype))) return;
      palette_entry = Light.palette;
      for (;;) {
        p = strchr(color, ' ');
        if (p) *p = 0;
        color = Trim(color);
        if (*color && LightColorEntry(color, strlen(color))) {
          memcpy(palette_entry, Light.entry_color, Light.subtype);
          palette_entry += Light.subtype;
          palette_count++;
        }
        if (!p) break;
        color = p + 1;
      }
      if (!(Light.palette = (uint8_t *)realloc(Light.palette, palette_count * Light.subtype))) return;
      Light.palette_count = palette_count;
    }
  }

  char palette_str[5 * Light.subtype * Light.palette_count + 3];
  p = palette_str;
  *p++ = '[';
  if (Light.palette_count) {
    palette_entry = Light.palette;
    for (int entry = 0; entry < Light.palette_count; entry++) {
      if (Settings.flag.decimal_text) {  // SetOption17 - Switch between decimal or hexadecimal output
        *p++ = '"';
        for (uint32_t i = 0; i < Light.subtype; i++) {
          p += sprintf_P(p, PSTR("%d,"), *palette_entry++);
        }
        *(p - 1) = '"';
      }
      else {
        for (uint32_t i = 0; i < Light.subtype; i++) {
          p += sprintf_P(p, PSTR("%02X"), *palette_entry++);
        }
      }
      *p++ = ',';
    }
    p--;
  }
  *p++ = ']';
  *p = 0;
  ResponseCmndChar(palette_str);
}
#endif  // USE_LIGHT_PALETTE

#ifdef USE_DGR_LIGHT_SEQUENCE
void CmndSequenceOffset(void)
{
  if ((XdrvMailbox.payload >= 0) && (XdrvMailbox.payload <= 255)) {
    if (XdrvMailbox.payload != Light.sequence_offset) {
      if (Light.sequence_offset) free(Light.channels_fifo);
      Light.sequence_offset = XdrvMailbox.payload;
      if (Light.sequence_offset) Light.channels_fifo = (uint8_t *)calloc(Light.sequence_offset, LST_MAX);
    }
  }
  ResponseCmndNumber(Light.sequence_offset);
}
#endif  // USE_DGR_LIGHT_SEQUENCE

void CmndUndocA(void)
{
  // Theos legacy status
  char scolor[LIGHT_COLOR_SIZE];
  LightGetColor(scolor, true);  // force hex whatever Option 17
  scolor[6] = '\0';  // RGB only
  Response_P(PSTR("%s,%d,%d,%d,%d,%d"), scolor, Settings.light_fade, Settings.light_correction, Settings.light_scheme, Settings.light_speed, Settings.light_width);
  MqttPublishPrefixTopic_P(STAT, XdrvMailbox.topic);
  mqtt_data[0] = '\0';
}

/*********************************************************************************************\
 * Interface
\*********************************************************************************************/

bool Xdrv04(uint8_t function)
{
  bool result = false;

  if (FUNC_MODULE_INIT == function) {
      return LightModuleInit();
  }
  else if (light_type) {
    switch (function) {
      case FUNC_SERIAL:
        result = XlgtCall(FUNC_SERIAL);
        break;
      case FUNC_LOOP:
        if (Light.fade_running) {
          if (LightApplyFade()) {
            LightSetOutputs(Light.fade_cur_10);
          }
        }
        break;
      case FUNC_EVERY_50_MSECOND:
        LightAnimate();
        break;
#ifdef USE_DEVICE_GROUPS
      case FUNC_DEVICE_GROUP_ITEM:
        LightHandleDevGroupItem();
        break;
#endif  // USE_DEVICE_GROUPS
      case FUNC_SET_POWER:
        LightSetPower();
        break;
      case FUNC_COMMAND:
        result = DecodeCommand(kLightCommands, LightCommand);
        if (!result) {
          result = XlgtCall(FUNC_COMMAND);
        }
        break;
      case FUNC_PRE_INIT:
        LightInit();
        break;
    }
  }
  return result;
}

#endif  // USE_LIGHT