5.10.0f
* Differentiate between JSON text defines and other text
defines to allow for English JSON while using different locale (#1449)
* Fix display of build date and time in non-english locale (#1465)
5.10.0d
* Renamed commands Color2,3,4 to Color3,4,5
* Add command
Color2 to set color while keeping same dimmer value
* Add led signal to
Carbon Dioxide (CO2) sensors (see user_config.h)
* Fix Wemo Emulation
again (#1357)
* Updated German translation (#1438)
* Add support for SenseAir S8 CO2 sensor to be enabled with define
USE_SENSEAIR in user_config.h
* Add support for Domoticz Air Quality
sensor to be used by MH-Z19(B) and SenseAir sensors
5.10.0b
* Change Sonoff Pow Energy MQTT data JSON message and
consolidate Status 8 into Status 10
* Add optional support for PZEM004T
energy sensor to enable with define USE_PZEM004T in user_config.h (#614)
* Add alternative support for SHT3x enabled with define USE_SHT3X_V2 in
user_config.h (#1314)
* Add alternative support for SHT3x enabled with
define USE_SHT3X_V3 in user_config.h (#1314)
5.10.0a
* Add (experimental) support for sensor SHT3x
* Add support
for sensor MH-Z19(B) using serial interface to be enabled with define
USE_MHZ19_HARD_SERIAL in user_config.h (#561, #1248)
* Add
(experimental) support for sensor MH-Z19(B) using SoftwareSerial to be
enabled with define USE_MHZ19_SOFT_SERIAL_OBSOLETE in user_config.h
(#561, #1248)
* Add (experimental) support for sensor MH-Z19(B) using
stripped SoftwareSerial to be enabled with define USE_MHZ19_SOFT_SERIAL
in user_config.h (#561, #1248)
* Add support for iTead SI7021
temperature and humidity sensor by consolidating DHT22 into AM2301 and
using former DHT22 as SI7021 (#735)
* Fix BME280 calculation (#1051)
*
Add support for BME680 using adafruit libraries (#1212)
* Change
ADS1115 default voltage range from +/-2V to +/-6V (#1289)
* Add
multipress support and more user configurable options to Sonoff Dual R2
(#1291)
* Fix Sonoff Bridge missed learned key if learned data contains
0x55 (End of Transmission) flag (#1095, #1294)
* Add support for
TSL2561 using adafruit library (#661, #1311)
* Add alternative support
for SHT3x (#1314)
5.10.0a
* Add (experimental) support for sensor SHT3x
* Add support
for sensor MH-Z19(B) using serial interface to be enabled with define
USE_MHZ19 in user_config.h (#561, #1248)
* Add (experimental) support
for sensor MH-Z19(B) using SoftwareSerial to be enabled with define
USE_MHZ19 in user_config.h (#561, #1248)
* Add support for iTead SI7021
temperature and humidity sensor by consolidating DHT22 into AM2301 and
using former DHT22 as SI7021 (#735)
* Fix BME280 calculation (#1051)
*
Add support for BME680 using adafruit libraries (#1212)
* Change
ADS1115 default voltage range from +/-2V to +/-6V (#1289)
* Add
multipress support and more user configurable options to Sonoff Dual R2
(#1291)
* Fix Sonoff Bridge missed learned key if learned data contains
0x55 (End of Transmission) flag (#1095, #1294)
* Add support for
TSL2561 using adafruit library (#661, #1311)
* Add alternative support
for SHT3x (#1314)
* Add (experimental) support for iTead SI7021 temperature and humidity
sensor (#735)
* Change ADS1115 default voltage range from +/-2V to
+/-6V (#1289)
5.10.0a
* Add (experimental) support for sensor SHT3x
* Change ADS1115
default voltage range from +/-2V to +/-4V (#1289)
* Add multipress
support and more user configurable options to Sonoff Dual R2 (#1291)
5.10.0a
* Add (experimental) support for sensor SHT3x
* Change ADS1115
default voltage range from +/-2V to +/-4V (#1289)
* Add multipress
support and more user configurable options to Sonoff Dual R2 (#1291)
5.9.1j
* Revert changes to xsns_05_ds18x20.ino and rename to
xsns_05_ds18x20_legacy.ino still needing library OneWire and providing
legacy JSON message:
*
"DS18x20":{"DS1":{"Type":"DS18B20","Address":"284CC48E04000079","Temperature":19.5},"DS2":{"Type":"DS18B20","Address":"283AC28304000052","Temperature":19.6}}
* Add new xdrv_05_ds18x20.ino free from library OneWire and add the
following features:
* Add support for DS1822
* Add forced setting of
12-bit resolution for selected device types (#1222)
* Add read
temperature retry counter (#1215)
* Fix lost sensors by performing
sensor probe at restart only thereby removing dynamic sensor probe
(#1215)
* Fix sensor address sorting using ascending sort on sensor
type followed by sensor address
* Rewrite JSON resulting in shorter
message allowing more sensors in default firmware image:
*
"DS18B20-1":{"Id":"00000483C23A","Temperature":19.5},"DS18B20-2":{"Id":"0000048EC44C","Temperature":19.6}
* Add additional define in user_config.h to select either single sensor
(defines disabled), new multi sensor (USE_DS18X20) or legacy multi
sensor (USE_DS18X20_LEGACY)
* Add support for Sonoff Dual R2 (#1249)
*
Fix ADS1115 detection (#1258)
5.9.1i
* Fix Arilux LC11 restart exception 0 after OTA upgrade
*
Disabled CRC lookup-table in OneWire.h (#define ONEWIRE_CRC8_TABLE 0) to
save some code space
* Rewrite xsns_05_ds18x20.ino adding support for
DS1822, correct address calculation and force setting 12-bit resolution
(#1222)
* DS18x20 sensor reconfiguration now only probed at restart
removing dynamic connection and intermittent sensor loss (#1215)
5.9.1g
* Fix typo ALIRFRCV into ARIRFRCV
* Add nicer clock support for
larger hand widths
* Add better clock support for different pixel
counts (#1226)
* Remove command EnergyReset 1..3
* Add commands
EnergyReset1 0..42500, EnergyReset2 0..42500 and EnergyReset3
0..42500000
* to (Re)set Energy Today, Yesterday or Total respectively
in Wh (#406, #685, #1202)
* Add SettingsSaveAll routine to command
SaveData to be used before controlled power down (#1202)
5.9.1f
* Upgrade library ArduinoJson to 5.11.2
* Upgrade library
IRRemoteEsp8266 to 2.2.1 + 2 commits but tweaked some protocols to keep
code usage small
* Upgrade library NeoPixelBus to 2.2.9
* Upgrade
library OneWire to 2.3.3 + 6 commits
* Formalize library PubSubClient
to 2.6 + 9 commits and additional delay
* Add optional ADS1115 driver
as alternative for unsupported I2Cdevlib in esp8266-core 2.4.0-rc2
*
Fix wrong response name for command HlwISet (#1214)
5.9.1e
* Add + (plus) and - (minus) to command color to select 1 out of
12 preset colors
* Add + (plus) and - (minus) to command ct to control
ColdWarm led ColorTemperature (+34/-34)
* Tune Arilux RF code
* Fix
possible iram1_0_seg compile error by shrinking ICACHE_RAM_ATTR code
*
Update core_esp8266_wiring_digital.c to latest (staged) level
*
Workaround Sonoff Bridge Learn Mode hang caused by unrecognised RF code
(#1181)
* Fix blank console log window by using XML character encoding
(#1187)
5.9.1d
* Add support for Arilux LC11 (CLearing RF home code when
selecting no Arilux module)
* Add fixed color options 1..12 to command
Color
* Add + (plus) and - (minus) to commands Dimmer (+10/-10), Speed
and Scheme
5.9.0b
* Add support for ADS1115 to be enabled in user_config.h and
needs libraries i2cdevlib-Core and i2cdevlib-ADS1115 (#338, #660)
* Fix
Exception 26 and empty console screen after usage of command
WakeupDuration (#1133)
* Fix some changed iTead web links in README.md
(#1137)
5.8.0o
* Remove max string length of 14 for Domoticz sensor
descriptions
* Add light scheme options (Color cycle Up, Down, Random)
and moving WS2812 schemes up by 3
* Add support for VEML6070 I2C Ultra
Violet level sensor (#1053)
5.8.0n
* Fix minimum TelePeriod of 10 seconds set by web page
* Shrink
information web page by 1k code space
* Removed Arduino IDE version too
low warning as it interferes with platformio.ini platform =
espressif8266_stage
* Add commands Color2, Color3, Color4, Width2,
Width3, Width4 and SetOption16 to set Ws2812 Clock parameters (#1019)
*
Add Polish language file (#1044, #1047)
* Add support for KMC 70011
Power Monitoring Smart Plug (#1045)
* Corrected German language file
(#1054)
5.8.0m
* Rewrite code (partly) using Google C++ Style Guide
(https://google.github.io/styleguide/cppguide.html)
* Allow empty
MqttHost name by using option 0
* Allow Mqtt server mDNS lookup only
when MqttHost name is empty (#1026)
* Change Ws2812 clock with more
flexible version (#1019)
* Add German language file (#1022)
* Support
connecting to MQTT brokers without userid and/or password (#1023)
* Add
commands PwmRange 1,255..1023 and PwmFrequency 1,100..4000 (#1025)
5.8.0l
* Update HTML/CSS to enable nicer form field entry
* Fix inverted relay status after restart or power on as regression from
5.8.0d (#909)
* Add send protocol Panasonic to IRsend (#1014)
* Fix relay power control when light power control is also configured as
regression from 5.8.0 (#1016)
5.8.0j
* Set default altitude to 0 to be used with pressure sensors
*
Document flash settings area for future use
* Prepare for 32-bit power
control (#995)
* Introduce sonoff.h master header
* Fix TLS MQTT SSL
fingerprint test (#808, #970)
* Fix pressure calculation for some BMP
versions regression introduced with version 5.8.0i (#974)
* Fix
Domoticz Dimmer set to same level not powering on (#945)
5.8.0i
* Add Domoticz counter sensor to IrReceive representing Received
IR Protocol and Data
* Fix Southern Hemisphere TIME_STD/TIME_DST
(#968)
* Add Sea level pressure calculation (#974)
* Fix virtual relay
status message used with Color/Dimmer control (#989)
* Fix command
IRSend and IRHvac case sensitive parameter regression introduced with
version 5.8.0 (#993)
5.8.0h
* Rename command IRRemote to IRSend (#956)
* Add IR Receiver
support. Disable in user_config.h (#956)
* Change default PWM
assignment for Witty Cloud to support optional Color/Dimmer control
(#976)
* GPIO12 (Green) from GPIO_PWM4 to GPIO_PWM2
* GPIO13
(Blue) from GPIO_PWM5 to GPIO_PWM3
* GPIO15 (Red) from GPIO_PWM3
to GPIO_PWM1
5.8.0f
* Set all saved power settings to Off when SetOption0
(SaveState) = 0 (#955)
* Allow PWM initialization after restart (#955)
* Add support for inverted PWM (#960)
5.8.0d
* Remove previous GPIO configuration when another module is
selected
* Fix inverted relay power on state (#909)
* Change default
PWM assignments for H801 RGB(CW) led controller to support optional
Color/Dimmer control
* GPIO04 (W2) from GPIO_PWM2 to GPIO_USER to
be user configurable for GPIO_PWM5 (second White - Warm if W1 is Cold)
* GPIO12 (Blue) GPIO_PWM3 no change
* GPIO13 (Green) from
GPIO_PWM4 to GPIO_PWM2
* GPIO14 (W1) from GPIO_PWM1 to GPIO_USER
to be user configurable for GPIO_PWM4 (first White - Cold or Warm)
*
GPIO15 (Red) from GPIO_PWM5 to GPIO_PWM1
* Change default PWM
assignments for MagicHome RGB(W) led controller to support optional
Color/Dimmer control
* GPIO05 (Green) from GPIO_PWM4 to GPIO_PWM2
*
GPIO12 (Blue) from GPIO_PWM5 to GPIO_PWM3
* GPIO13 (White) GPIO_USER
to be user configurable for GPIO_PWM4 (White - Cold or Warm)
* GPIO14
(Red) from GPIO_PWM3 to GPIO_PWM1
* Add command SetOption15 0
(default) for command PWM control or SetOption15 1 for commands
Color/Dimmer control to PWM RGB(CW) leds (#941)
5.8.0c
* Add warning to webpage when USE_MINIMAL is selected (#929)
*
Fix compile error when DOMOTICZ_UPDATE_TIMER is not defined (#930)
*
Fix alignment of web page items in some browsers (#935)
* Add smoother
movement of hour hand in WS2812 led clock (#936)
* Add support for
Magic Home RGBW Led controller (#940)
5.8.0b
* Fix command FullTopic entry when using serial or console
interface
* Fix possible UDP syslog blocking
* Add debug information
to MQTT subscribe
* Add Domoticz sensors for Voltage and Current (#903)
5.7.1j
* Remove the need for NeoPixelBus library for Hue support
*
Reintroduce xdrv_ws2812 for flexible future library changes
* Fix basic
On, Off, Toggle, Blink and BlinkOff commands when other language is
selected (#874)
5.7.1f
* Reduce code and string length for output of commands Modules
and GPIOs
* Add optional dimmer parameter to command Wakeup for
AiLight, Sonoff B1, Led and BN-SZ01 (#867)
5.7.1d
* Fix watchdog timeout caused by lack of stack space by now
using global buffers (#853)
* Removed webserver syslog disable as now
no longer needed
* Increased default MQTT message size from 368 to 405
bytes while keeping DMQTT_MAX_PACKET_SIZE = 512 (because we can)
* Fix
MQTT Offline or Remove MQTT retained topic code
* Allow command
SwitchTopic in group mode (#861)
* Allow command SwitchMode if no
switches are defined (#861)
5.7.1 20170909
* Remove leading spaces from MQTT data
* Fix webconsole
special character entry
* Allow # as prefix for color value
* Fix
Alexa detection and Hue App Update Request (#698, #854)
5.7.0 20170907
* Shrink module configuration webpage
* Fix settings order during startup to allow for displaying debug
messages
* Fix some string length issues
* Add more string length tests by using strncpy
* Add Ai-Thinker RGBW led (AiLight)
* Add Power check and add PulseTime to power check at startup (#526)
* Add Supla Espablo support (#755)
* Add more precision to Sonoff Pow period and power results using
command WattRes 0|1 (#759)
* Add basic internationalization and localization (#763)
* Add more Sonoff Pow range checking (#772)
* Fix invalid JSON (#786, #822)
* Add duplicate check to received RF signal within 2 seconds for Sonoff
Bridge (#810)
5.6.1 20170818
* Change module list order in webpage
* Fix Sonoff T1 1CH and 2CH configuration (#751)
*
* 5.6.0 20170818
* Fix Sonoff Pow intermittent exception 0
* Change Sonoff Pow sending Domoticz telemetry data only
* Add Ai-Thinker RGBW led (AiLight) (experimental)
* Add NeoPixelBus library to Sonoff Led for Hue support
* Add user configurable GPIO4 and GPIO5 to module Sonoff Bridge
* Add Sonoff B1 RGBCW led support with command Color RRGGBBCCWW (#676)
* Add command CT 152..500 to Sonoff Led and Sonoff B1 to control Color
Temperature
* Add Cold-Warm slider to web page for Sonoff Led and Sonoff B1
* Add CT parameter to Hue
* Add Sonoff T1 support (#582)
* Add AnalogInput0 if configured as Analog Input to webpage (#697, #746)
* Add command SetOption14 0|1 to enable interlock mode (#719, #721)
* Fix Mitsubishi HVAC IR power controll (#740)
5.6.0 20170818
* Fix Sonoff Pow intermittent exception 0
* Change Sonoff Pow sending Domoticz telemetry data only
* Add Ai-Thinker RGBW led (AiLight) (experimental)
* Add NeoPixelBus library to Sonoff Led for Hue support
* Add user configurable GPIO4 and GPIO5 to module Sonoff Bridge
* Add Sonoff B1 RGBCW led support with command Color RRGGBBCCWW (#676)
* Add command CT 152..500 to Sonoff Led and Sonoff B1 to control Color
Temperature
* Add Cold-Warm slider to web page for Sonoff Led and Sonoff B1
* Add CT parameter to Hue
* Add Sonoff T1 support (#582)
* Add AnalogInput0 if configured as Analog Input to webpage (#697, #746)
* Add command SetOption14 0|1 to enable interlock mode (#719, #721)
* Fix Mitsubishi HVAC IR power controll (#740)
5.5.2i
* Fix Sonoff Pow intermittent exception 0
* Change Sonoff Pow sending Domoticz telemetry data only
* Add Sonoff B1 RGBCW led support with command Color RRGGBBCCWW (#676)
* Add command CT 152..500 to Sonoff Led and Sonoff B1 to control Color
Temperature
* Add Cold-Warm slider to web page for Sonoff Led and Sonoff B1
* Add CT parameter to Hue
* Add Ai-Thinker RGBW led (AiLight) (experimental)
* Add NeoPixelBus library to Sonoff Led for Hue support (saves 1k code
space)
* Add user configurable GPIO4 and GPIO5 to module Sonoff Bridge
* Fix Mitsubishi HVAC IR power controll (#740)
* Add Sonoff T1 support (#582)
5.5.2 20170808
* Extent max number of WS2812 pixels from 256 to 512 (#667)
* Add OTA handling if server responds with no update available (#695)
* Removed undocumented command FlashMode (#696)
* Fix compile time error message due to increased message buffer size
(#703)
5.5.1b
* Extent max number of WS2812 pixels from 256 to 512 (#667)
* Add OTA handling if server responds with no update available (#695)
* Removed undocumented command FlashMode (#696)
* Fix compile time error message due to increased message buffer size (#703)
5.5.1 20170805
* Fix Sonoff Rf Bridge issues
* Add Sonoff RF Bridge MQTT messages on received and learned RF signal
* Add command VoltRes 0|1 to select voltage resolution to 0.1 V (#654)
* Add averaging to Analog input (#686)
* Add Energy tele data on Sonoff Pow Threshold change (#688)
* Fix inconsistent property names in Messages (#690)
5.5.0 20170730
* Reduce code space by removing the following commands as they are
replaced by SetOption alternatives:
* SaveState = SetOption0
* ButtonRestrict = SetOption1
* Units = SetOption2
* MQTT = SetOption3
* MQTTResponse = SetOption4
* TempUnit = SetOption8
* Smoothing WS2812 animation poll, invert fade speed and max allowed
wakeup time down to 3000 seconds
* Fix initial button press detection
* Add support for Sonoff RF Bridge 433 using command RfKey
* Fix regression from 5.0.7 by increasing message buffer size from 360
to 368 to accomodate 4 x DS18x20 sensors (#637)
* Add GroupTopic to Topic test when using ButtonTopic/SwitchTopic to
send either ON/OFF or TOGGLE (#642)
* Adjust HLW calibration limits to accomodate HuaFan device and add
commands HlwPSet, HlwUSet and HlwISet (#654)
5.4.0 20170725
* Fix command reset regression introduced in 5.2.0
* Increase polling from 0.1 second to 0.05 second
* Add multipress to all buttons
* Fix button 1 double press behaviour on multi relay devices
* Add support for Hua Fan Smart Socket (#479)
* Add support for Sonoff 4ch Pro (#565)
* Add command SetOption13 1 to allow immediate action on single button
press
* (disables multipress, hold and unrestricted commands) (#587)
5.3.0 20170715
* Major Hue rewrite which might introduce Alexa problems. If so,
initiate an issue
* Add support for Sonoff Led and BN-SZ01 Ceiling Led brightness control
to Hue
* Fix Sonoff Led Power, Dimmer and Color MQTT response (#176)
* Add commands Delay and Backlog to allow multiple commands at once
separated by ";" (#593)
* Use default flashmode DOUT to solve restart hangs on esp8285 chips
(#453, #598)
* Change Web console column width from 99 to 300 (#599)
5.2.4 20170703
* Removed flash mode update after selecting different module solving
esp8285 related problems
* Add device type flag to sonoff_template.ino
* Change Sonoff Led Wakeup and add support for Sonoff BN-SZ01 Led (#567)
5.2.4 20170703
* Removed flash mode update after selecting different module solving
esp8285 related problems
* Add device type flag to sonoff_template.ino
* Change Sonoff Led Wakeup and add support for Sonoff BN-SZ01 Led
5.2.3 20170630
* Change Sonoff Led color conversion code
* Fix SetOption12 handling
* Simplify auto configuration upgrade
* Add option Upgrade <version_number> to only upgrade to any higher
version (Old PR #213)
* Change FallbackTopic to cmnd/<MQTTClient>/<command> <parameter>
bypassing FullTopic and Prefix (#538)
5.2.2 20170625
* Add configuration SaveAddress to Status 1 and Information Page
* Change Sonoff Led Color conversion from AtoH to strtol
* Fix possible wrong uploads due to configuration overwrites (#542)
* Fix payload negative numbers (#547)
5.2.2 20170625
* Add configuration SaveAddress to Status 1 and Information Page
* Change Sonoff Led Color conversion from AtoH to strtol
* Fix possible wrong uploads due to configuration overwrites (#542)
* Fix payload negative numbers (#547)
5.2.1 20170622
* Fix Restore Configuration in case of lower version
* Revert auto configuration upgrade allowing easy upgrade which was
removed in version 5.2.0
* Fix config auto upgrade from versions below version 4.1.1 (#530)
5.2.0 20170619
* Add command SetOption12 1 to disable newly released configuration
flash rotate to reduce flash wear
* Fix command CounterDebounce by removing test for active GPIO (#524)
* Add command SetOption33 1..250 to allow user configure POW
Max_Power_Retry count (#525)
5.1.7 20170616
* Prep removal of SetOptions alternatives
* Restore webpage upgrade error messages removed in 5.1.5
* Add hold button functionality to buttons 2 to 4
* Add command SetOption32 1..100 to set Key Hold Time from 0.1 seconds
to 10 seconds (#200)
* Allow slashes in Topic, GroupTopic, ButtonTopic and SwitchTopic (#507)
* Changed webpage form actions from post to get and use relative path
url (#434, #522)
5.1.6 20170606
* Shrink code
* Removed online configuration of Domoticz In and Domoticz Out MQTT
strings
* Removed commands DomoticzInTopic and DomoticzOutTopic
* Add define KEY_HOLD_TIME to configure button hold threshold before
sending MQTT Hold message
* Add command StateText4 to configure button MQTT Hold text (=
MQTT_CMND_HOLD)
* Add command SetOption11 0|1 to swap pushbutton single and double press
functionality (#200)
* Add command SwitchMode<x> 5 (PUSHBUTTONHOLD) and 6
(PUSHBUTTONHOLD_INV) (#489)
5.1.4 20170601
* Removed pre-compiled versions from repository as they are available
within the release
* Changed HUE Device type to color supporting version (#464)
* Fix compile error when BE_MINIMAL is selected (#467, #476)
* Add multiple compiled versions to release using updated Travis script
and platformio.ini (#467)
arendst
altelch
Don Willingham