mirrors
/
Tasmota
mirror of https://github.com/arendst/Tasmota.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
14,732 Commits 6 Branches 113 Tags 1.2 GiB
Commit Graph

259 Commits

Author SHA1 Message Date
Theo Arends b92b59b2b1 Add command ``SetOption113 1`` 
Add command ``SetOption113 1`` to set dimmer low on rotary dial after power off (#8263)
 2020-10-25 12:59:24 +01:00
Theo Arends 40ad4f7ed0 Final refactor telegram code 2020-10-12 13:44:32 +02:00
stefanbode d3dfe6205c
Prevent crashes on high counter pulse. e.g. AC-Dimmer, Current-Counter... 
I had reproducible Hardware Watchdog resets and hangs with the AC-Dimmer, but only if the 100Hz from the main hammered the device. I found this help and change the code. Now the AC-Dimmer is ON for >3days. I assume this change is responsible because it was the only change.
 2020-10-12 12:08:40 +02:00
Theo Arends fc04c50674 Convert AdcParam parameters from versions before v9.0.0.2 
- Command ``Gpio17`` replaces command ``Adc``
- Command ``Gpios`` replaces command ``Adcs``
 2020-10-11 11:31:46 +02:00
Stephan Hadinger 241843d384 Added `ZbReset 2` 2020-10-10 16:19:37 +02:00
Theo Arends 2ffb04d4da Update comment 2020-10-05 18:24:44 +02:00
Paul C Diem e3cc5df996 Add PWMDimmerPWMs command, Set brightness LEDs in setBriRGB & setBriCT 2020-10-02 12:40:45 -05:00
Theo Arends 7a73dd7019 Merge branch 'development' into dev-gpio16 2020-09-30 14:54:29 +02:00
Theo Arends c00d7035d9 Redesign GPIO to 16-bit 2020-09-29 18:10:21 +02:00
Theo Arends 9cbd2d531d Initial GPIO redesign 2020-09-25 18:15:31 +02:00
nicandris a9af3baea0 Added SetOption112 - Use friendly name in zigbee topic (use with SetOption89) 2020-09-19 13:43:14 +02:00
Federico Leoni 4e84e33103 Prep for new Hass Discovery 2020-09-18 18:45:58 -03:00
Federico Leoni e45a5f3323 TuyaMCU Update 2020-09-16 15:45:56 -03:00
Chris Keydel 51688c18ea Merge remote-tracking branch 'remotes/upstream/development' into development 2020-09-15 09:40:36 +02:00
Stephan Hadinger ecc27aa383 Add Zigbee auto-config when pairing 2020-09-12 10:57:54 +02:00
Chris Keydel cc6a8a1c12 Adding buzzer frequency output again to latest development branch. This should now pass all tests. 2020-09-09 20:00:55 +02:00
stefanbode fb59126f98
Update settings.h 2020-09-09 15:27:43 +02:00
Theo Arends 021ec06553
Update settings.h 2020-09-09 09:40:28 +02:00
stefanbode 68c260d520
Adding 1 byte new shutter mode to set on demand 2020-09-05 20:43:39 +02:00
device111 994081430c AS3935 Refactor 
- Fix Autodisturber
- Fix Event IRQ Flicker when calibrating and on Start up
- Add command `power` on/off
- Add command `noirqevent` (suppress IRQ with no event)
- Add Info Log when no Pin defined
- Add Info Log when SCO and TCO Calibration Fails
- optimize Autotune Caps
- new init procedure (Reset before Start)
- save 128 Bytes of Ram
- update language files
 2020-09-03 09:37:10 +02:00
Stephan Hadinger fa179ee296 Add ``SetOption109 1`` to force gen1 Alexa mode, for Echo Dot 2nd gen devices only 2020-08-27 18:54:53 +02:00
Theo Arends 0f1e4fc917 Add command ``PowerDelta1`` to ``PowerDelta3`` 
- Bump version to 8.4.0.3
- Add command ``PowerDelta1`` to ``PowerDelta3`` to trigger on up to three phases (#9134)
 2020-08-23 18:29:16 +02:00
Charles d90d019dcc
Merge branch 'development' into teleinfo 2020-08-14 19:59:22 +02:00
Charles 6e05a247b7 changed setOption103 to setOption108 taken during dev 2020-08-14 19:55:39 +02:00
Charles f0bb4f10fa add setOption103 2020-08-14 19:46:52 +02:00
Theo Arends 18bf102e4f Prep support for SO114 until SO145 2020-08-13 16:49:11 +02:00
Stephan Hadinger 6ee0137bb8 Reserve SetOptions for Virtual CT 2020-08-13 16:21:11 +02:00
Stephan Hadinger b0188642b1 Change triple-mode TLS via configuration in a single firmware (TLS AWS IoT, Letsencrypt and No-TLS) 2020-08-12 17:20:37 +02:00
Charles 48a346c443 Added SetOption102 to switch between mode 2020-08-11 19:57:39 +02:00
Paul C Diem c3112b20e0 Fix missed merge of device_group_count initialization. Rename remote_device_mode setting to multiple_device_groups. 2020-08-09 10:16:15 -05:00
Theo Arends a3445e5b5f Add ESP32 ADC framework 2020-08-03 18:21:34 +02:00
Norbert Richter 51b9740a5d
Add script usage flags 2020-07-23 13:23:16 +02:00
Stephan Hadinger 2da8f3c393 Added `SO101 1` to suffix commands with source endpoint 2020-07-20 19:30:32 +02:00
Theo Arends 23da6285c1 Add command ``SetOption100 0/1`` 
Add command ``SetOption100 0/1`` to remove ``ZbReceived`` value from ``{"ZbReceived":{xxx:yyy}}`` JSON message
 2020-07-19 15:57:37 +02:00
stefanbode f2e686ab26
Fixes some reboots on change the dimmer 2020-07-07 16:17:43 +02:00
Stephan Hadinger 8bfd753334 Zigbee EZSP milestone 4 2020-07-02 22:56:37 +02:00
Theo Arends 0cc1dd957b Add SO98 to control user rotary support 2020-07-02 18:13:14 +02:00
Federico Leoni 03db100197 TuyaMCU baud rate 2020-06-29 11:01:55 -03:00
Theo Arends 83bbe757db Add command ``Module2`` 
Add command ``Module2`` to configure fallback module on fast reboot (#8464)
 2020-06-17 14:06:46 +02:00
Theo Arends 715697cb32 Add ESP32 ethernet commands 
Add ESP32 ethernet commands ``EthType 0/1``, ``EthAddress 0..31`` and ``EthClockMode 0..3`` (#8503)
 2020-06-16 18:36:49 +02:00
Stephan Hadinger 2181b0c1a4 Add serial to TCP bridge, ``TCPStart`` and ``TCPBaudRate`` (needs #define USE_TCP_BRIDGE) 2020-06-15 19:22:56 +02:00
Theo Arends ef0b797686 Add basic support for ESP32 ethernet 
Add basic support for ESP32 ethernet adding commands ``Wifi 0/1`` and ``Ethernet 0/1`` both default ON (#8503)
 2020-06-15 18:27:04 +02:00
Theo Arends cdf7aa74bf Add rule trigger ``System#Init`` 
Add rule trigger ``System#Init`` to allow early rule execution without wifi and mqtt initialized yet (#8673)
 2020-06-14 12:36:44 +02:00
Alexey Kardashevskiy 5558da527a Add MAX6675 sensor 
This is basically a cut down version of MAX31855 without reference
temperature reading and lower resolution (only positive, 12bit only).

This implements 16bit protocol (31855 uses 32bit). SetOption94 enables
the new behavior.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
---
Changes:
v2:
* treat occasional 0xfff as an error
* do not add new sensor pins, use SetOption94 instead
 2020-06-04 10:00:00 +10:00
Theo Arends eafaccfcda Add support for up to two BH1750 sensors 
Add support for up to two BH1750 sensors controlled by commands ``BH1750Resolution`` and ``BH1750MTime`` (#8139)
 2020-06-01 18:00:56 +02:00
Paul C Diem bc6d7ceb87 Add support for SetOption88 to put each relay in a separate device groups 2020-05-26 22:07:25 -05:00
Theo Arends c333b67669 Fix DisplaySevenSegment compilation error 2020-05-25 10:21:36 +02:00
Norbert Richter eb6de53628
Fix setting addr typo 2020-05-24 20:07:25 +02:00
Theo Arends dc9ce42888 Refactor LedPwm code 2020-05-23 13:04:17 +02:00
George e780f25283 Gamma correction 
Implement changes proposed by @s-hadinger review.
* Use 0-255 range in settings
* Apply gamma correction from xdrv_light & use changuintscale helper fn (as per pwm light routine)
 2020-05-23 17:13:04 +10:00
George 603b628f97 Add pwm mode masking 
* Extra setting & command to set - allows masking of pwm mode. Use case is for leds attached to buttons for seeing at night; this way user can combine both pwm and digital leds (i.e. pwm for the button leds but non-button status leds can stay on/off).
 2020-05-20 13:23:54 +10:00
George bd33574ee7 Align new settings to 2B boundaries 
Attempting to fix settings not working correctly (might have mucked up the boundaries and compiler put a padding byte in).
 2020-05-20 13:23:53 +10:00
George a305f435e8 First pass at led pwm settings 
* Added settings for ledpwm_on and ledpwm_off with defaults that mimic current digitalwrite function
* Changed ledpoweridx from digitalwrite to analogwrite
* Add commands to change new settings
 2020-05-20 13:23:52 +10:00
Stephan Hadinger a2b05399a3 Add automatic compression of Rules to achieve ~60% compression, added ``SetOption93 1`` to control caching of rules 2020-05-08 19:33:20 +02:00
Theo Arends f66a0ee561 Add Webcam commands 2020-05-08 17:17:09 +02:00
Theo Arends d78ca09c30 Integrate OpenTherm and WindMeter 2020-05-07 16:03:27 +02:00
Theo Arends cb1b7739b6
Merge branch 'development' into new-windmeter-sensor 2020-05-07 14:58:23 +02:00
Yury Sannikov 9e6a809ba2 adapt to the latest development branch changes 2020-05-07 11:58:17 +03:00
Matteo Albinola a3455f235b Merge branch 'development' into new-windmeter-sensor 
# Conflicts:
#	tasmota/language/bg_BG.h
#	tasmota/language/cs_CZ.h
#	tasmota/language/de_DE.h
#	tasmota/language/el_GR.h
#	tasmota/language/en_GB.h
#	tasmota/language/es_ES.h
#	tasmota/language/fr_FR.h
#	tasmota/language/he_HE.h
#	tasmota/language/hu_HU.h
#	tasmota/language/it_IT.h
#	tasmota/language/ko_KO.h
#	tasmota/language/nl_NL.h
#	tasmota/language/pl_PL.h
#	tasmota/language/pt_BR.h
#	tasmota/language/pt_PT.h
#	tasmota/language/ro_RO.h
#	tasmota/language/ru_RU.h
#	tasmota/language/sk_SK.h
#	tasmota/language/sv_SE.h
#	tasmota/language/tr_TR.h
#	tasmota/language/uk_UA.h
#	tasmota/language/zh_CN.h
#	tasmota/language/zh_TW.h
 2020-05-06 21:33:07 +02:00
Theo Arends 87f89f0a7d Change max number of supported PCF8574 to four 
Change max number of supported PCF8574 to four (#8355)
 2020-05-06 17:44:44 +02:00
Matteo Albinola 097d51ea72 Merge branch 'development' into new-windmeter-sensor 
# Conflicts:
#	tasmota/language/bg-BG.h
#	tasmota/language/cs-CZ.h
#	tasmota/language/de-DE.h
#	tasmota/language/el-GR.h
#	tasmota/language/en-GB.h
#	tasmota/language/es-ES.h
#	tasmota/language/fr-FR.h
#	tasmota/language/he-HE.h
#	tasmota/language/hu-HU.h
#	tasmota/language/it-IT.h
#	tasmota/language/ko-KO.h
#	tasmota/language/nl-NL.h
#	tasmota/language/pl-PL.h
#	tasmota/language/pt-BR.h
#	tasmota/language/pt-PT.h
#	tasmota/language/ro-RO.h
#	tasmota/language/ru-RU.h
#	tasmota/language/sk-SK.h
#	tasmota/language/sv-SE.h
#	tasmota/language/tr-TR.h
#	tasmota/language/uk-UA.h
#	tasmota/language/zh-CN.h
#	tasmota/language/zh-TW.h
 2020-05-05 09:07:03 +02:00
Theo Arends 8bdd46a965 Start ESP32 webcam on GUI load 2020-05-04 17:13:14 +02:00
Theo Arends 8f9bc1e5f7 Cleanup ESP32 webcam 2020-05-04 12:48:42 +02:00
Matteo Albinola 691e1e9653 Merge branch 'development' into new-windmeter-sensor 2020-05-02 15:10:56 +02:00
Theo Arends 5d18ad1c74 Add experimental basic support for ESP32 
- Add experimental basic support for Tasmota on ESP32 based on work by Jörg Schüler-Maroldt
- Bump version to 8.2.0.6
- This ESP32 upgrade breaks current ESP32 templates
 2020-05-01 17:30:09 +02:00
Theo Arends 7dc7b631d4 Fix ESP32 settings size 
Fix ESP32 settings size as regression from yesterday
 2020-04-29 14:18:38 +02:00
Theo Arends c24de18278 Change ESP32 pin allocation part 1 2020-04-28 18:27:07 +02:00
Matteo Albinola e23b43f979 Add option for triggering a tele update under conditions 2020-04-28 14:02:05 +02:00
Theo Arends 4536746d03 Update Changelog and Release notes 2020-04-28 11:09:56 +02:00
Matteo Albinola bdb5d92d85 Add variable for tele updates 2020-04-27 09:38:39 +02:00
Matteo Albinola dcc4623791 Merge branch 'development' into new-windmeter-sensor 2020-04-26 19:39:14 +02:00
Matteo Albinola b9aa6fe19d Add configuration persistence fixing variable alignment problem 2020-04-26 19:21:10 +02:00
Matteo Albinola 24709b9f6d Add windmeter sensor 2020-04-26 09:43:52 +02:00
dermm 809a377154 Add Option to Activate PWM CT mode without select module 48 
Hello,

I would like to share with you my extension of the code.
I have some new lamps that have 2 PWM channels that are not classically wired. The first one is for brightness and the other channel is for color temperature.
Tasmota has already integrated the possibility to switch between CWWW and CTBRI. I only built the possibility to set it up manually.

greetings,
Jens

PS: This is my first commit. If I did something wrong, please report it.
 2020-04-22 19:43:57 +02:00
Theo Arends c37dde93c2 Add ESP32 QuickPowerCycle control 2020-04-19 15:36:04 +02:00
Theo Arends eab612871c Fix ESP32 bootloop control using RTC memory 2020-04-19 14:18:12 +02:00
Theo Arends 0f3619238f Add ESP32 bootloop control 2020-04-19 13:08:04 +02:00
Theo Arends e1d7416a36 Add features to ESP32 
- Decided to support ONLY flash mode DOUT (no software change but allows for RX1/TX1)
- Add GPIO9 (RX1) and GPIO10 (TX1) for hardware serial support
- Add above two GPIOs to template
- Moved basic ADC0 support from GPIO36 to GPIO33
 2020-04-18 18:10:41 +02:00
Theo Arends d3b2f8c489 Add config version tag 
- Add config version tag
- Bump version 8.2.0.4
 2020-04-17 11:57:09 +02:00
Theo Arends d2b7b4012f More ESP32 compatibility 
More ESP32 compatibility (breaks current ESP32 configuration again!)
 2020-04-16 14:59:01 +02:00
Federico Leoni 0f1cd33323
Update settings.h 2020-04-14 11:51:00 -03:00
Federico Leoni 8cf4a2ca50
Update settings.h 2020-04-14 10:46:22 -03:00
Theo Arends 0c24651ed0 Add interval to PMS5003 sensor 
Add interval to PMS5003 sensor to extend lifetime (#8128)
 2020-04-12 12:35:58 +02:00
gururise 54f7cf475d create new setting pms_wake_interval for PMS sensor interval time 2020-04-11 10:37:12 -07:00
Stephan Hadinger ed4cc8c226 Save 28 bytes in Settings for Zigbee configuration 2020-04-11 10:35:31 +02:00
device111 2f627f98ce support for AS3935, initial commit 2020-04-11 01:48:37 +02:00
Theo Arends 93fd5dd618 Add experimental minimal support for ESP32 
Add experimental minimal support for ESP32 (#8110)
 2020-04-10 18:24:08 +02:00
Theo Arends e69f103755 Small change to Settings var names 2020-04-09 11:40:26 +02:00
Theo Arends 05af60074f Add quick wifi connect using saved AP parameters 
Add quick wifi connect using saved AP parameters when ``SetOption56 0`` (#3189)
 2020-04-07 12:19:54 +02:00
Stephan Hadinger 34fc92d6ca Add command ``SetOption91 1`` to enable fading at startup / power on 2020-04-06 10:46:17 +02:00
Theo Arends 4b09af8a36 Add BH1750 resolution control 
Add command ``Sensor10 0/1/2`` to control BH1750 resolution - 0 = High (default), 1 = High2, 2 = Low (#8016)
 2020-04-01 16:46:12 +02:00
Theo Arends ec899817aa Change some deepsleep wake messages 
- Change remove MQTT Info messages on restart for DeepSleep Wake (#8044)
- Add command ``SetOption90 1`` to disable non-json MQTT messages (#8044)
 2020-04-01 14:05:30 +02:00
Theo Arends bd34db87b1
Merge pull request #8021 from to-scho/feature/counter_debounce_low_high 
Enhanced counter debouncing
 2020-03-31 16:12:03 +02:00
Theo Arends d713468c0c Add support for longer template names 
Add support for longer template names
 2020-03-29 17:41:31 +02:00
to-scho 4a2f3d87c5 Enhanced counter debouncing 
New commands CounterDebounceLow and CounterDebounceHigh to allow individual debounce times for low and high pulse widths to discard non valid falling edges. These are checked before legacy CounterDebounce checks distance between to valid falling edges.
Useful to have robust counter results when using e.g. an TCRT5000 optical sensor to count electromechanical "Ferraris" electricity meters.
 2020-03-29 17:05:52 +02:00
Theo Arends e5a44e6326 Refactor template 2020-03-28 18:08:43 +01:00
Federico Leoni 5ba26780e9 Humidity Offset 2020-03-16 14:29:55 -03:00
Hadinger 8855d2a218 Add Zigbee use distinct MQTT topics per device for SENSOR, allowing retained messages (#7835) 2020-03-04 21:00:57 +01:00
Theo Arends 669f88a5aa Add Settings.flag2.speed_conversion 2020-03-02 14:00:57 +01:00
Theo Arends 1973bb2474 Add support for Jarolift rollers by Keeloq algorithm 
Add support for Jarolift rollers by Keeloq algorithm
 2020-02-27 17:48:27 +01:00
he.so 3657cda425 resolved merge conflict 2020-02-27 17:22:28 +01:00
Theo Arends 5cfe247611 Change default my_user_config.h driver and sensor support 
Change default my_user_config.h driver and sensor support removing most sensors and adding most drivers
 2020-02-27 15:10:42 +01:00
Paul C Diem 1f1c956b26 Use newly allocated settings and flags 2020-02-26 21:27:09 -06:00
Theo Arends 878d93ebdb Prepare for PWM Dimmer 
Prepare for PWM Dimmer (#7791)
 2020-02-26 15:29:14 -06:00
Theo Arends f2074932f7 Clean up wifi connection / disconnection 2020-02-26 15:29:13 -06:00
Theo Arends 1655c1b3aa Add some wifi debug options 2020-02-26 15:29:12 -06:00
he.so 71340dc8b6 push travis, since it had an environment issue during last build 2020-02-26 20:10:29 +01:00
he.so bc584468af Using macro to exclude debug logs from code when compiling for production 2020-02-26 19:17:36 +01:00
Theo Arends f57a4d217c Prepare for PWM Dimmer 
Prepare for PWM Dimmer (#7791)
 2020-02-26 14:39:27 +01:00
Theo Arends 407334be6b Clean up wifi connection / disconnection 2020-02-26 13:45:46 +01:00
he-so c1aedfc4c7
Merge branch 'development' into dev-arendst 2020-02-25 18:22:05 +01:00
Theo Arends 3146bcf23a Add some wifi debug options 2020-02-25 16:49:19 +01:00
Paul C Diem d0bb1b36e4 Merge branch 'device-groups' of https://github.com/pcdiem/Tasmota into pwm-dimmer 2020-02-24 20:06:47 -06:00
Paul C Diem fd610738ea Merge branch 'development' of https://github.com/pcdiem/Tasmota into pwm-dimmer 2020-02-24 19:26:08 -06:00
he-so dd3d9f3b21
Merge branch 'development' into dev-arendst 2020-02-24 19:41:12 +01:00
he.so e25f14f37a Jarolift shutter working with keeloq 2020-02-24 19:23:57 +01:00
Theo Arends 9682da603a Add Device Group storage 
Add Device Group storage (#7786)
 2020-02-24 16:47:41 +01:00
Paul C Diem c0a5156d8f Initial pwm dimmer support 2020-02-24 07:19:15 -06:00
Paul C Diem f409d7258e Initial device groups support (power and light) 2020-02-21 09:09:21 -06:00
Theo Arends 1a074da0b5 Add BootCount Reset Time to Status 
Add BootCount Reset Time as BCResetTime to ``Status 1``
 2020-02-07 12:38:10 +01:00
Hadinger fab03d8173 Add ``SetOption84 1`` sends AWS IoT device shadow updates (alternative to retained) 2020-01-26 23:08:52 +01:00
Theo Arends 3b71173a09 Add precision to Moisture sensor 
Add precision to Moisture sensor (#7402)
 2020-01-23 18:13:32 +01:00
Hadinger 18ce64f813 Add Zigbee persistence and friendly names 2020-01-18 00:02:01 +01:00
to-scho 8cf411a1c3 New command ShutterLock 
Command shutterlock<x> 1 locks shutter <x> movement. Any ongoing movement is still finished when called. Subsequent calls of shutter commands about movement, web buttons and shutter buttons  are blocked when shutter is locked. shutterlock<x> 0 unlocks shutter <x>.
 2020-01-12 14:18:15 +01:00
Hadinger aa665c1439 Add SetOption82 to limit the CT range for Alexa to 200..380 2020-01-04 11:01:44 +01:00
Theo Arends 1e0550e750 Add command ShutterButton <parameters> 
Add command ``ShutterButton <parameters>`` to control shutter(s) by to-scho (#7403)
 2020-01-02 15:12:59 +01:00
Theo Arends 044fae2a6e
Update settings.h 2020-01-02 14:47:33 +01:00
to-scho 406a5a15f5 Initial support for shutter button control 
New command "ShutterButton<x> <a> <b> <c> <d> <e> <f> <g> <h> <i> <j>" added that allows to assign a tasmota button <x> to control shutter <a>.

Single press button shutter is set to position <b>.  Double press button shutter is set to position <c>. Tripple press button shutter is set to position <d>. Hold button shutter is set to position <e>. Disabling any button action is given by <b> ... <e> equal to "-". Any press of the button while the shutter is moving will immediately stop that shutter.

Global steering of all your shutters at home is supported by MQTT. By any button action an MQTT command can be initiated to the <grouptopic> of the device. For single press button this can be enabled by <f> equal to "1". Disabling is indicated by <f> equal to "0". Double to hold actions are given by <g> ... <i>, correspondingly. When <j> is equal to "0" only "cmnd/<grouptopic>/Shutterposition<y> ..." with <y>=<x> is fired. When <j> is equal to "1" <y>=1...4 is used to control any shutter number of a tasmota device having same <grouptopic>.

Easy setup for an "up" button:
ShutterButton<x> <a> up (same as ShutterButton<x> <a> 100 50 74 100 0 0 0 1 1)
Single press will move shutter up to 100%, double press to 50% and tripple press to 74%. Holding the button for more than the hold time (SetOption32) moves all shutters with same <grouptopic> up to 100%.

Easy setup for an "down" button:
ShutterButton<x> <a> down (same as ShutterButton<x> <a> 0 50 24 0 0 0 0 1 1)
Single press will move shutter down to 0%, double press to 50% and tripple press to 24%. Holding the button for more than the hold time (SetOption32) moves all shutters with same <grouptopic> down to 0%.

Easy setup for an "updown" button:
ShutterButton<x> <a> updown (same as ShutterButton<x> <a> 100 0 50 - 0 0 0 0 0)
Single press will move shutter up to 100%, double press down to 0% and tripple press to 50%. No hold action and no other shutter control by MQTT.
 2020-01-02 11:23:11 +01:00
Theo Arends 8aa9109656 Happy New Year 
Happy New Year
 2019-12-31 14:23:34 +01:00
Leonid Muravjev ed5330169a HotPlug for sensors support added 2019-12-29 23:10:53 +03:00
Andre Thomas aefb3fb9de
Reserve SetOption79 
Used to enable resetting of the counter values to zero after telemetry data was transmitted.
 2019-12-28 16:47:30 +02:00
Theo Arends a2478f9569 Change number of ``FriendlyName``s from 4 to 8 
Change number of ``FriendlyName``s from 4 to 8
 2019-12-24 15:06:19 +01:00
Theo Arends 35e51918e3 Document Settings changes 2019-12-22 16:53:51 +01:00
Theo Arends ad4a7e91ac Add support for max 150 characters 
Add support for max 150 characters in most command parameter strings (#3686, #4754)
 2019-12-22 15:23:52 +01:00
Theo Arends f55e02e800 Bump version to 8.0.0.1 
Change Settings text handling allowing variable length text within a total text pool of 699 characters
 2019-12-21 15:37:36 +01:00
Theo Arends 7e24ed9c2c Fix error message 2019-12-20 18:24:20 +01:00
Theo Arends 3d59de5d1d Bump version to 7.1.2.6 
- Change some more Settings locations freeing up space for future single char allowing variable length text
- Add Zigbee support for Xiaomi Aqara Vibration Sensor and Presence Sensor by Stefan Hadinger
- Add Shutter functions ramp up/down and MQTT reporting by Stefan Bode
 2019-12-14 13:16:55 +01:00
Theo Arends 21fa1fa04e Bump version to 7.1.2.5 
Change some Settings locations freeing up space for future single char allowing variable length text
 2019-12-13 12:05:07 +01:00
Theo Arends bfe2dc68cb Fix statistics 2019-12-11 19:30:52 +01:00
Theo Arends eccc9f20f5 Add weight_change for #7170 
Add weight_change for #7170
 2019-12-11 11:54:27 +01:00
Theo Arends dfee90bd61 Changelog update 2019-12-09 15:15:16 +01:00
Shantur Rathore 6c3d029286 Implement capability for setting CORS to a specific website instead of just enable for all websites 2019-12-08 21:07:39 +00:00
Theo Arends 00fd7f2f7c Bump version to 7.1.2.2 
Add command ``SerialConfig 0..23`` or ``SerialConfig 8N1`` to select Serial Config (#7108)
 2019-12-06 15:02:05 +01:00
Theo Arends ac065867d3 Add command ``SetOption77 0/1`` 
Add command ``SetOption77 0/1`` to keep power on when slider is far left
 2019-11-29 13:11:35 +01:00
Theo Arends 14f6f6f22b Add command TempOffset -12.6 .. 12.6 
Add command TempOffset -12.6 .. 12.6 to set global temperature sensor offset (#6958)
 2019-11-18 12:15:49 +01:00
stefanbode 1cf4152747
Update settings.h 2019-11-18 09:31:39 +01:00
Theo Arends 5c324357e6 Add command SetOption76 0/1 
Add command SetOption76 0/1 to enable incrementing bootcount when deepsleep is enabled (#6930)
 2019-11-15 11:50:41 +01:00
Theo Arends e099ebe7b6 Bump version to 7.0.0.4 
Add command WifiPower 0 .. 20.5 to set Wifi Output Power which will be default set to 17dB
 2019-11-08 13:00:32 +01:00
Theo Arends 1e29593469 Bump version 7.0.0.3 
Initial support for I2C driver runtime control using command I2CDriver and document I2CDEVICES.md
 2019-11-03 17:54:39 +01:00
Theo Arends 4b49979274 Add SetOption comments to code 2019-11-03 13:51:22 +01:00