Commit Graph

529 Commits

Author SHA1 Message Date
Theo Arends 0c90f71e00 Fix ADC initalization sequence
Fix ADC initalization sequence (#9473)
2020-10-06 12:12:14 +02:00
Theo Arends 539ba11690 Add support for inverted NeoPixelBus data
Add support for inverted NeoPixelBus data line by enabling ``#define USE_WS2812_INVERTED`` (#8988)
2020-10-05 19:03:40 +02:00
Theo Arends 0eef729d8f Remove migration support from before 7.0
- Remove support for direct upgrade from Tasmota versions before 7.0
- Remove auto config update for all Friendlynames and Switchtopic from Tasmota versions before 8.0
2020-10-05 18:12:32 +02:00
Theo Arends f0ab0d274d Change NeoPixelBus library from v2.5.0.09 to v2.6.0 2020-10-05 17:32:30 +02:00
Theo Arends 1f49daacd3 Fix light wakeup exception 0
Fix light wakeup exception 0 (divide by zero) when ``WakeupDuration`` is not initialised (#9466)
2020-10-05 15:16:43 +02:00
Theo Arends d442b64d90 Fix shutter timing problem
Fix shutter timing problem due to buffer overflow in calibration matrix (#9458)
2020-10-05 12:56:12 +02:00
Theo Arends 96b2c8010e Change ``Status`` command output for disabled status types
Change ``Status`` command output for disabled status types
2020-10-05 11:45:58 +02:00
Theo Arends 3c9583e1ff Fix exception 28 due to device group buffer overflow
Fix exception 28 due to device group buffer overflow (#9459)
2020-10-04 17:46:45 +02:00
Theo Arends 677bb85ecd Fix ledlink blink when no network connected
Fix ledlink blink when no network connected regression from 8.3.1.4 (#9292)
2020-10-04 17:08:11 +02:00
Theo Arends d100ba3592 Update changelog and releasenotes 2020-10-04 12:48:26 +02:00
Theo Arends ad3cfa6cbb Add SDM630 three phase ImportActive Energy display
Add SDM630 three phase ImportActive Energy display when ``#define SDM630_IMPORT`` is enabled by Janusz Kostorz (#9124)
2020-10-03 12:46:58 +02:00
Theo Arends dab734ad3f Update v9.0.0.1 information 2020-10-03 12:08:43 +02:00
Theo Arends a9630b9d05 Change pulsetime to allow use for all relays
Change pulsetime to allow use for all relays with 8 interleaved so ``Pulsetime1`` is valid for Relay1, Relay9, Relay17 etc. (#9279)
2020-10-02 17:32:45 +02:00
Theo Arends d07fa4b492 Change A4988 optional microstep pin selection 2020-10-02 17:09:09 +02:00
Theo Arends 330109d67c Add optional support for Orno WE517
Add optional support for Orno WE517-Modbus energy meter by Maxime Vincent (#9353)
2020-10-02 16:37:43 +02:00
Theo Arends 6585fc07e8 Change MAX31865 driver to support up to 6 thermocouples
Change MAX31865 driver to support up to 6 thermocouples selected by ``MX31865 CS`` instead of ``SSPI CS`` (#9103)
2020-10-02 16:11:13 +02:00
Theo Arends 72d561e9be Change new IR Raw compact format (#9444) 2020-10-02 14:35:11 +02:00
Theo Arends dcb0b68a21
Merge branch 'development' into dev-gpio16 2020-10-02 12:24:34 +02:00
Theo Arends dd95b4a8cd Bump dev version to 9.0.0.1 2020-10-02 12:22:01 +02:00
Theo Arends c6115a3516 Update changelog and releasenotes 2020-09-30 15:44:37 +02:00
Theo Arends 7b567d23ea Force rebuild 2020-09-29 14:43:11 +02:00
Theo Arends 5cf40fc059 Add support for VL53L1X time of flight sensor
Add support for VL53L1X time of flight sensor by Johann Obermeier
2020-09-29 11:27:53 +02:00
Theo Arends b95a193711 Update changelog 2020-09-27 12:57:49 +02:00
Theo Arends 2b160912f5 Fix Shelly 2.5 higher temperature
Fix Shelly 2.5 higher temperature regression from 8.2.0.1 (#7991)
2020-09-24 12:07:23 +02:00
Theo Arends 2bf98839e8 Update changelog and release notes 2020-09-22 11:47:41 +02:00
Theo Arends afd197d493 Add command ``SetOption111 1``
Add command ``SetOption111 1`` to enable frequency output for buzzer GPIO (#8994)
2020-09-15 11:44:09 +02:00
Theo Arends 26e041ab6e Fix reset BMP sensors
Fix reset BMP sensors when executing command ``SaveData`` and define USE_DEEPSLEEP enabled (#9300)
2020-09-14 12:26:32 +02:00
Theo Arends 9aa18c23f0 Add support for MLX90640
Add support for MLX90640 IR array temperature sensor by Christian Baars
2020-09-14 11:49:33 +02:00
Theo Arends 0e5c1c31ef Update RELEASENOTES.md 2020-09-09 12:44:30 +02:00
Theo Arends 05c153c7b1 Update change log 2020-09-09 11:22:34 +02:00
Theo Arends 5176e3ab02 Bump version to 8.5.0.1 2020-09-07 14:54:31 +02:00
Theo Arends 201bad3eb0 Prep release 8.5 2020-09-06 18:41:39 +02:00
Theo Arends 77375b3d9c Change thehackbox.org to ota.tasmota.com 2020-08-29 17:50:44 +02:00
Theo Arends 0f1e4fc917 Add command ``PowerDelta1`` to ``PowerDelta3``
- Bump version to 8.4.0.3
- Add command ``PowerDelta1`` to ``PowerDelta3`` to trigger on up to three phases (#9134)
2020-08-23 18:29:16 +02:00
Theo Arends 4724fa2c49 Add support for DYP ME007
Add support for DYP ME007 ultrasonic distance sensor by Janusz Kostorz (#9113)
2020-08-17 16:25:24 +02:00
Theo Arends 731ca297b0 Add better config corruption recovery
- Add better config corruption recovery (#9046)
- Remove support for 1-step upgrade from versions before 6.6.0.11 to versions after 8.4.0.1
2020-08-13 13:04:28 +02:00
Theo Arends f268697e54 Add command ``Restart 2`` to halt system
Add command ``Restart 2`` to halt system. Needs hardware reset or power cycle to restart (#9046)
2020-08-10 16:19:44 +02:00
Theo Arends ce388c799f Add ESP32 Analog input support for GPIO32 to GPIO39 2020-08-04 16:33:05 +02:00
Theo Arends 1d990ad091 Fix ESP32 PWM range 2020-08-03 11:52:25 +02:00
Theo Arends 70c7f38a1f Release 8.4.0 2020-07-29 16:58:07 +02:00
Theo Arends ba3856d900 Change IRRemoteESP8266 library
Change IRRemoteESP8266 library from v2.7.6 to v2.7.8.10, fixing Samsung and Pioneer protocols (#8938)
2020-07-29 14:44:45 +02:00
Theo Arends 69e252b7d7 Prep release 8.4.0 2020-07-29 10:31:38 +02:00
Theo Arends b1f98f5711 Add tasmota-zbbridge support 2020-07-28 09:25:48 +02:00
Theo Arends 3acae81fc0 Change Domoticz commands prefix from ``Domoticz`` to ``Dz``
- Change Domoticz commands prefix from ``Domoticz`` to ``Dz``
- Add command ``DzSend<type> <index>,<value1(;value2)|state>`` to send values or state to Domoticz
2020-07-24 15:30:21 +02:00
Theo Arends 72e3765a55 Add command (``S``)``SerialSend6`` \<comma seperated values\>
Add command (``S``)``SerialSend6`` \<comma seperated values\> (#8937)
2020-07-21 12:42:18 +02:00
Theo Arends eb4164e713 Update RELEASENOTES.md 2020-07-21 11:03:03 +02:00
Theo Arends 4584effbce Change all timer references from ``Arm`` to ``Enable``
Change all timer references from ``Arm`` to ``Enable`` in GUI, ``Timer`` command and JSON message
2020-07-21 10:44:45 +02:00
Theo Arends 23da6285c1 Add command ``SetOption100 0/1``
Add command ``SetOption100 0/1`` to remove ``ZbReceived`` value from ``{"ZbReceived":{xxx:yyy}}`` JSON message
2020-07-19 15:57:37 +02:00
Theo Arends 934ca43463 Remove Arduino ESP8266 Core support before 2.7.1
Remove Arduino ESP8266 Core support for versions before 2.7.1
2020-07-17 11:49:56 +02:00
Theo Arends 6b0870343b Change to limited support of Arduino IDE
Change to limited support of Arduino IDE as an increasing amount of features cannot be compiled with Arduino IDE
2020-07-16 18:21:19 +02:00
Theo Arends fec0fa47ca Update RELEASENOTES.md 2020-07-15 12:07:19 +02:00
Theo Arends 6843f58a91 Add support for Schneider Electric iEM3000
Add support for Schneider Electric iEM3000 series Modbus energy meter by Marius Bezuidenhout
2020-07-14 17:37:14 +02:00
Theo Arends 202326c5f3 Update changelog 2020-07-12 15:34:02 +02:00
halfbakery 387800adc5
Update RELEASENOTES.md
More devices supported without additional scripting
2020-07-09 19:39:11 +02:00
Theo Arends 642fa216c2 Merge branch 'development' into pre-release 2020-07-04 12:04:41 +02:00
Theo Arends 0cc1dd957b Add SO98 to control user rotary support 2020-07-02 18:13:14 +02:00
Theo Arends e52961b3b4 Add rotary encoder support
- Add rotary encoder support for light dimmer and optional color temperature if button1 still pressed (#8670)
- Fix Mi Desk Lamp brightness control (#8748)
2020-06-30 16:58:36 +02:00
Theo Arends faecd38006 Add compile time User Template
Add compile time User Template (#8766)
2020-06-24 16:37:02 +02:00
Theo Arends 7c8b06ce16 Add compile time interlock parameters
Add compile time interlock parameters (#8759)
2020-06-22 22:36:54 +02:00
Theo Arends c533eb1186 BLM certify part 2
- Change define USE_TASMOTA_SLAVE into USE_TASMOTA_CLIENT
- Change commands ``SlaveSend`` and ``SlaveReset`` into ``ClientSend`` and ``ClientReset``
2020-06-18 16:05:55 +02:00
Theo Arends 2af506e48b Change ESP32 USER GPIO template representation decreasing template message size
Change ESP32 USER GPIO template representation decreasing template message size
2020-06-18 12:55:10 +02:00
Theo Arends 934526244f Add support for single wire LMT01
Add support for single wire LMT01 temperature Sensor by justifiably (#8713)
2020-06-17 17:22:41 +02:00
Theo Arends 7c785ab056 Add support for Energy sensor (Denky)
Add support for Energy sensor (Denky) for French Smart Metering meter provided by global Energy Providers
2020-06-17 15:00:48 +02:00
Theo Arends 5730ced6b8
Merge pull request #8695 from hallard/teleinfo
Prep for French Metering xnrg_15_teleinfo
2020-06-17 14:42:22 +02:00
Theo Arends 83bbe757db Add command ``Module2``
Add command ``Module2`` to configure fallback module on fast reboot (#8464)
2020-06-17 14:06:46 +02:00
Charles fae80fc9dc
Merge branch 'development' into teleinfo 2020-06-16 19:04:39 +02:00
Theo Arends 715697cb32 Add ESP32 ethernet commands
Add ESP32 ethernet commands ``EthType 0/1``, ``EthAddress 0..31`` and ``EthClockMode 0..3`` (#8503)
2020-06-16 18:36:49 +02:00
Charles 3b8c83deb1
Merge branch 'development' into teleinfo 2020-06-15 22:29:53 +02:00
Charles 93a38e892c @s-hadinger requests before merging PR 2020-06-15 21:52:47 +02:00
Theo Arends ef0b797686 Add basic support for ESP32 ethernet
Add basic support for ESP32 ethernet adding commands ``Wifi 0/1`` and ``Ethernet 0/1`` both default ON (#8503)
2020-06-15 18:27:04 +02:00
Charles ae9e770950
Merge branch 'development' into teleinfo 2020-06-15 10:22:44 +02:00
Theo Arends cdf7aa74bf Add rule trigger ``System#Init``
Add rule trigger ``System#Init`` to allow early rule execution without wifi and mqtt initialized yet (#8673)
2020-06-14 12:36:44 +02:00
Charles 4929d3c8e5 Added French Metering Teleinfo 2020-06-12 21:53:26 +02:00
Theo Arends 03cd543127 Add support for HP303B
Add support for HP303B Temperature and Pressure sensor by Robert Jaakke (#8638)
2020-06-12 12:38:52 +02:00
Theo Arends 4c5b2f37fd Add initial support for Telegram
Add initial support for Telegram bot (#8619)
2020-06-11 17:30:33 +02:00
Theo Arends e54c85f83e Add full support for BL0940
Add support for BL0940 energy monitor as used in Blitzwolf BW-SHP10 (#8175)
2020-06-07 17:59:54 +02:00
Theo Arends 41f77f688c Add command ``SetOption94 0/1``
Add command ``SetOption94 0/1`` to select MAX31855 or MAX6675 thermocouple support (#8616)
2020-06-04 11:36:58 +02:00
device111 8c29ead09d Add support for up to eight MCP9808 temperature sensors 2020-06-02 08:35:49 +02:00
Theo Arends eafaccfcda Add support for up to two BH1750 sensors
Add support for up to two BH1750 sensors controlled by commands ``BH1750Resolution`` and ``BH1750MTime`` (#8139)
2020-06-01 18:00:56 +02:00
Theo Arends 29070f1136 Add ``CpuFrequency`` and ``FlashFrequency`` to status 0
- Add ``CpuFrequency`` to ``status 2``
- Add ``FlashFrequency`` to ``status 4``
2020-05-30 14:59:52 +02:00
Theo Arends 66233b1749 Add support for full MAC address
Add support for unique MQTTClient (and inherited fallback topic) by full Mac address using ``mqttclient DVES_%12X`` (#8300)
2020-05-26 17:08:13 +02:00
Theo Arends bacb730b53 Fix escape of non-JSON received serial data
Fix escape of non-JSON received serial data (#8329)
2020-05-26 12:35:21 +02:00
Theo Arends 90d3cd45c4 Add command ``Time 4``
Add command ``Time 4`` to display timestamp using milliseconds (#8537)
2020-05-25 11:44:17 +02:00
Theo Arends 6073bd9eb6 Update changelog 2020-05-24 11:55:39 +02:00
Theo Arends ca8b38d0d0 Add LedPwm commands
Add commands ``LedPwmOn 0..255``, ``LedPwmOff 0..255`` and ``LedPwmMode1 0/1`` to control led brightness by George (#8491)
2020-05-23 15:17:13 +02:00
Theo Arends 93ca102391 Change ExportActiveTariff to ExportTariff 2020-05-22 18:31:14 +02:00
Theo Arends 855e054db8 Change Energy JSON data
- Bump version 8.3.1.2
- Change Energy JSON Total field from ``"Total":[33.736,11.717,16.978]`` to ``"Total":33.736,"TotalTariff":[11.717,16.978]``
- Change Energy JSON ExportActive field from ``"ExportActive":[33.736,11.717,16.978]`` to ``"ExportActive":33.736,"ExportActiveTariff":[11.717,16.978]``
- Add Three Phase Export Active Energy to SDM630 driver
2020-05-22 17:48:21 +02:00
Theo Arends 86921e60b2 Add support for VEML6075 and VEML7700
- Add support for VEML6075 UVA/UVB/UVINDEX Sensor by device111 (#8432)
- Add support for VEML7700 Ambient light intensity Sensor by device111 (#8432)
2020-05-22 15:16:01 +02:00
Theo Arends e5942df57f Update Change log 2020-05-21 17:06:52 +02:00
Theo Arends cd7f719563 Add more functionality to ``Switchmode`` 11 and 12 (#8450)
Add more functionality to ``Switchmode`` 11 and 12 (#8450)
2020-05-19 15:52:10 +02:00
Theo Arends e1fbf64037 Add command ``Rule0``
Add command ``Rule0`` to change global rule parameters
2020-05-19 11:15:31 +02:00
Theo Arends ebbdb28e48 Bump version to 8.3.1.1 2020-05-18 17:06:11 +02:00
Theo Arends ad427b62ac Update RELEASENOTES.md 2020-05-18 14:23:47 +02:00
Theo Arends 66250a6b97 Merge branch 'development' into pre-release 2020-05-18 14:21:28 +02:00
Theo Arends 7241b9d37c Prep release 8.3.1 2020-05-18 14:12:44 +02:00
Theo Arends 2055d06825 Merge branch 'development' into pre-release 2020-05-18 10:06:12 +02:00
Theo Arends d7f6c78ed9 Add command ``DeviceName``
Add command ``DeviceName`` defaults to FriendlyName1 and replaces FriendlyName1 in GUI
2020-05-17 17:10:17 +02:00
Theo Arends c11952595e Change QPC detection from 4 to 7 power interrupts
Change Quick Power Cycle detection from 4 to 7 power interrupts (#4066)
2020-05-16 11:22:48 +02:00
Theo Arends eed6564405 Merge branch 'development' into pre-release 2020-05-14 15:35:30 +02:00
Theo Arends fff26f6538 Fix button default state
- Fix button default state
- Bump version 8.3.0.1
2020-05-14 15:32:27 +02:00
Jason2866 31fe729649
Core 2.7.1.not 2.7.0 2020-05-14 12:50:47 +02:00
Theo Arends 4e05975b6c Sync with released 8.3.0 2020-05-14 12:40:48 +02:00
Theo Arends 878f3da25c Merge branch 'development' into pre-release 2020-05-10 14:59:41 +02:00
Theo Arends ec045445e6 Enable rule compression in my_user_config.h 2020-05-10 14:39:13 +02:00
Theo Arends 0404adf4a2 Merge branch 'development' into pre-release 2020-05-10 11:28:17 +02:00
Theo Arends 89b130b45a Change root rule trigger
Add rule trigger at root level like ``on loadavg<50 do power 2 endon`` after ``state`` command
2020-05-10 11:09:34 +02:00
Theo Arends bf215b1b9d Update root level triggers
Add rule trigger ``#`` to trigger on any root value like ``on #loadavg<50 do power 2 endon`` after ``state`` command
2020-05-09 19:33:19 +02:00
Theo Arends 92c05faa8b Add root level triggers as discussed on Discord
- Add rule trigger ``root#`` to trigger on any root value like ``on root#loadavg<50 do power 2 endon`` after ``state`` command
2020-05-09 19:22:12 +02:00
Theo Arends 0572644c7f Change PWM Frequencies
- Change default PWM Frequency to 977 Hz from 880 Hz
- Change minimum PWM Frequency from 100 Hz to 40 Hz
2020-05-08 16:06:02 +02:00
Theo Arends b00463900b Merge branch 'development' into pre-release 2020-05-07 18:14:34 +02:00
Theo Arends d78ca09c30 Integrate OpenTherm and WindMeter 2020-05-07 16:03:27 +02:00
Theo Arends e2da3e432e Merge branch 'development' into pre-release 2020-05-05 14:31:43 +02:00
Theo Arends 5d18ad1c74 Add experimental basic support for ESP32
- Add experimental basic support for Tasmota on ESP32 based on work by Jörg Schüler-Maroldt
- Bump version to 8.2.0.6
- This ESP32 upgrade breaks current ESP32 templates
2020-05-01 17:30:09 +02:00
Theo Arends ade7b4b96e Merge branch 'development' into pre-release 2020-04-28 16:05:06 +02:00
Theo Arends 4536746d03 Update Changelog and Release notes 2020-04-28 11:09:56 +02:00
Theo Arends 14040f601c Breaking Change Device Groups multicast address and port
- Breaking Change Device Groups multicast address and port  (#8270)
- Version bump 8.2.0.5
2020-04-25 11:20:48 +02:00
Theo Arends 1af24ddcf5 Update changelog 2020-04-22 16:36:27 +02:00
Theo Arends 6c5e9a89c4 Add command ``SO`` as shortcut for command ``SetOption`` 2020-04-21 09:48:27 +02:00
Theo Arends c977069df5 Merge branch 'development' into pre-release 2020-04-20 18:31:20 +02:00
Theo Arends 0b08c72247 Add command ``SetOption73 1`` for button decoupling
Add command ``SetOption73 1`` for button decoupling and send multi-press and hold MQTT messages by Federico Leoni (#8235)
2020-04-20 17:47:40 +02:00
Theo Arends d3b2f8c489 Add config version tag
- Add config version tag
- Bump version 8.2.0.4
2020-04-17 11:57:09 +02:00
Theo Arends 1c91a3a4f7 Merge branch 'development' into pre-release 2020-04-14 12:39:19 +02:00
Theo Arends 5db2ac1955 Add commands ``GlobalTemp`` and ``GlobalHum``
Add commands ``GlobalTemp`` and ``GlobalHum`` to init sensor data (#8152)
2020-04-13 14:40:29 +02:00
Theo Arends baf3b9b662 Add command ``Palette``
Add command ``Palette`` to add the ability to specify a palette of colors (#8150)
2020-04-13 12:19:16 +02:00
Theo Arends 1972f85616 Merge branch 'development' into pre-release 2020-04-12 14:54:28 +02:00
Theo Arends 42d82fdc97 Fix PMS5003 input range 2020-04-12 14:54:06 +02:00
Theo Arends 0c24651ed0 Add interval to PMS5003 sensor
Add interval to PMS5003 sensor to extend lifetime (#8128)
2020-04-12 12:35:58 +02:00
Theo Arends b5512b6d13 Merge branch 'development' into pre-release 2020-04-11 14:51:32 +02:00
Theo Arends 45e9408b73 Add support for AS3935 Lightning Sensor
Add support for AS3935 Lightning Sensor by device111 (#8130)
2020-04-11 14:51:08 +02:00
Theo Arends 13d7943b58 Add support for Seven Segment display
Add support for Seven Segment display using HT16K33 (#8116)
2020-04-10 16:05:43 +02:00
Theo Arends afb8c60093 Add support for an iAQ sensor (#8107)
Add support for an iAQ sensor (#8107)
2020-04-10 15:13:01 +02:00
Theo Arends 03e61701e4 Merge branch 'development' into pre-release 2020-04-09 12:49:24 +02:00
Theo Arends 6f51fd4763 Update Changelog and Release Notes 2020-04-09 12:47:47 +02:00
Theo Arends d080bb97b8 Prep release 8.3.0 2020-04-09 11:58:35 +02:00
Theo Arends ac7c8c210b Merge branch 'development' into pre-release 2020-04-09 11:54:21 +02:00
Theo Arends e69f103755 Small change to Settings var names 2020-04-09 11:40:26 +02:00
Theo Arends c7aeadcd6b Merge branch 'development' into pre-release 2020-04-07 17:26:01 +02:00
Theo Arends 8b7aca39f2 Update changelog and release notes 2020-04-07 17:25:37 +02:00
Theo Arends 05af60074f Add quick wifi connect using saved AP parameters
Add quick wifi connect using saved AP parameters when ``SetOption56 0`` (#3189)
2020-04-07 12:19:54 +02:00
Theo Arends 7845dae2df Update core info 2020-04-05 14:40:47 +02:00
Theo Arends 4b98e9dfb2 Merge branch 'development' into pre-release 2020-04-05 14:33:47 +02:00
Theo Arends 49febe4a54 Add BH1750 Measurement Time control
Add command ``Sensor10 31..254`` to control BH1750 measurement time which defaults to 69 (#8016)
2020-04-02 15:17:54 +02:00
Theo Arends 4b09af8a36 Add BH1750 resolution control
Add command ``Sensor10 0/1/2`` to control BH1750 resolution - 0 = High (default), 1 = High2, 2 = Low (#8016)
2020-04-01 16:46:12 +02:00
Theo Arends ec899817aa Change some deepsleep wake messages
- Change remove MQTT Info messages on restart for DeepSleep Wake (#8044)
- Add command ``SetOption90 1`` to disable non-json MQTT messages (#8044)
2020-04-01 14:05:30 +02:00
Theo Arends 39d8011c89 Change light scheme 2,3,4 cycle time
Change light scheme 2,3,4 cycle time speed from 24,48,72,... seconds to 4,6,12,24,36,48,... seconds (#8034)
2020-03-31 17:27:33 +02:00
Theo Arends 7ebb5f3cb9 Add commands ``CounterDebounceLow`` and ``CounterDebounceHigh``
Add commands ``CounterDebounceLow`` and ``CounterDebounceHigh`` to control debouncing (#8021)
2020-03-31 16:30:30 +02:00
blakadder dd9f7920de changed links to new docs architecture 2020-03-29 23:28:41 +02:00
Theo Arends d713468c0c Add support for longer template names
Add support for longer template names
2020-03-29 17:41:31 +02:00
Theo Arends 257dd18796 Add console command history (#7483, #8015)
Add console command history (#7483, #8015)
2020-03-29 15:35:58 +02:00
Theo Arends dbc9f16ffc Add support for up to four MQTT GroupTopics
- Bump version to 8.2.0.2
- Add support for up to four MQTT GroupTopics using the same optional Device Group names (#8014)
2020-03-28 16:48:36 +01:00
Theo Arends 0a573bd0d6 Update changelog and releasenotes 2020-03-23 15:19:08 +01:00
Theo Arends 5471de6f1c Change GPIO initialization solving possible Relay toggle on (OTA) restart
Change GPIO initialization solving possible Relay toggle on (OTA) restart
2020-03-22 17:42:32 +01:00
Theo Arends b6fc31ebb0 Bump version 8.2.0.1
- Bump version 8.2.0.1
- Change HM-10 sensor type detection and add features (#7962)
2020-03-21 15:46:28 +01:00
Theo Arends 211520b1c8 Bump version 8.2.0 2020-03-21 11:22:22 +01:00
Theo Arends eb24fc914e Merge branch 'development' into release 2020-03-19 15:59:53 +01:00
Theo Arends ca07ab5417 Prep for release 2020-03-19 15:58:37 +01:00
Theo Arends efc444f729 Merge branch 'development' into release 2020-03-18 16:17:31 +01:00
Theo Arends 18729bcc41 Add support for ElectriQ iQ-wifiMOODL
Add support for ElectriQ iQ-wifiMOODL RGBW light by ianbyte (#7947)
2020-03-18 12:32:13 +01:00
Theo Arends a3cc81bb8a Merge branch 'development' into release 2020-03-17 16:52:28 +01:00
Theo Arends b00baaec53 Update release info 2020-03-17 11:22:55 +01:00
Theo Arends a258296055 Add Dew Point to Temperature and Humidity sensors
Add Dew Point to Temperature and Humidity sensors
2020-03-16 17:09:15 +01:00
Theo Arends 635d769286 Merge branch 'development' into release 2020-03-14 15:44:20 +01:00
Theo Arends 4a8f73aea3 Update changelog and release notes 2020-03-14 15:32:44 +01:00
Theo Arends 18fac98f5b Merge branch 'development' into release 2020-03-14 15:24:47 +01:00
Theo Arends 5d944829cd Update changelog and release notes 2020-03-14 15:24:22 +01:00
Theo Arends d043ac770d Refactor support_switche.ino
- Add commands ``SwitchMode 13`` PushOn and ``SwitchMode 14`` PushOnInverted (#7912)
- Refactor support_switche.ino
2020-03-14 13:13:33 +01:00
Theo Arends 5235ad1757 Add support for HDC1080
Add support for HDC1080 Temperature and Humidity sensor by Luis Teixeira (#7888)
2020-03-14 12:43:02 +01:00
Theo Arends 1be984e5ee Merge branch 'development' into release 2020-03-13 12:21:44 +01:00
Theo Arends c62a0318cd Bump version to 8.1.0.11
- Bump version to 8.1.0.11
- Add HAss Discovery support for Button and Switch triggers by Federico Leoni (#7901)
2020-03-13 12:00:52 +01:00
Theo Arends c65cc9f156 Merge branch 'development' into release 2020-03-08 15:10:47 +01:00
Theo Arends 2603459747 Revert switchmode 6 according to issue 7778
Revert switchmode 6 according to issue 7778 (#7831)
2020-03-08 13:32:20 +01:00
Theo Arends bf86700e90 Consolidate DHT sensor driver 2020-03-08 12:28:14 +01:00
Theo Arends 8d768d421d Merge branch 'development' into release 2020-03-06 15:55:56 +01:00
Theo Arends bd98c1816c Update TEMPLATE and RELEASE info 2020-03-06 15:52:46 +01:00
Theo Arends e3be05756a Merge branch 'development' into release 2020-03-06 12:18:08 +01:00
Theo Arends a8e369e5ce Update feature information 2020-03-05 14:00:47 +01:00
Theo Arends 46e6c3a796 Fix RO compilation 2020-03-04 12:18:32 +01:00
Theo Arends 3343164da9 Add support for MaxBotix HRXL-MaxSonar
Add support for MaxBotix HRXL-MaxSonar ultrasonic range finders by Jon Little (#7814)
2020-03-01 14:20:19 +01:00
Theo Arends 1973bb2474 Add support for Jarolift rollers by Keeloq algorithm
Add support for Jarolift rollers by Keeloq algorithm
2020-02-27 17:48:27 +01:00
Theo Arends 5cfe247611 Change default my_user_config.h driver and sensor support
Change default my_user_config.h driver and sensor support removing most sensors and adding most drivers
2020-02-27 15:10:42 +01:00
Theo Arends b4b5eb878c Add support for PWM dimmer
Add support for Martin Jerry/acenx/Tessan/NTONPOWER SD0x PWM dimmer switches by Paul Diem (#7791)
2020-02-27 11:16:38 +01:00
Theo Arends 9962b311d5 Add support for UDP Group commands
Add commands ``SetOption85 0/1`` and ``DevGroupShare`` supporting UDP Group command using ``GroupTopic`` without MQTT by Paul Diem (#7790)
2020-02-25 12:13:49 +01:00
Theo Arends f706b7c490 Add support for Wemos Motor Shield V1
Add support for Wemos Motor Shield V1 by Denis Sborets (#7764)
2020-02-22 12:18:20 +01:00
Theo Arends 92258703d8
Merge pull request #7761 from device111/development
Add i2c Sensor AHT10/15 support.
2020-02-20 12:03:39 +01:00
Theo Arends 9b1fc4342b Revert wifi connectivity stability introduced in 8.1.0.5
Revert wifi connectivity stability introduced in 8.1.0.5 (#7746, #7602, #7621)
2020-02-20 11:24:35 +01:00
Theo Arends 5e4d8e5641 Fix relation between RSSI and signal strength
Fix relation between RSSI and signal strength
2020-02-20 10:07:00 +01:00
device111 f7d4d5ddb1 Ad release note 2020-02-19 19:49:09 +01:00
Theo Arends 6a84899e10 Eliminating call sntp_get_real_time
Change display of some date and time messages from "Wed Feb 19 10:45:12 2020" to "2020-02-19T10:45:12"
2020-02-19 15:23:59 +01:00
Theo Arends 7cc783a532 Add another new DHT driver based on ESPEasy
Add another new DHT driver based on ESPEasy. The old driver can still be used using define USE_DHT_OLD. The previous new driver can be used with define USE_DHT_V2 (#7717)
2020-02-13 17:02:07 +01:00
Theo Arends 8079ee9749 Change MQTT message size
Change MQTT message size with additional 200 characters
2020-02-12 18:00:53 +01:00
Theo Arends 7d0577eb31 Add new DHT driver
Add new DHT driver. The old driver can still be used using define USE_DHT_OLD (#7468)
2020-02-10 16:29:17 +01:00
Theo Arends edadaa284f Bump version to 8.1.0.7 2020-02-10 15:20:38 +01:00
Theo Arends af63bb363d Add support for FiF LE-01MR energy meter
Add support for FiF LE-01MR energy meter by saper-2 (#7584)
2020-02-10 15:18:11 +01:00
Theo Arends 3de74e8850 Add optional Wifi AccessPoint passphrase
Add optional Wifi AccessPoint passphrase define WIFI_AP_PASSPHRASE in my_user_config.h (#7690)
2020-02-10 13:54:27 +01:00
Theo Arends 504570d5d5 Fix MaxPower functionality
Fix MaxPower functionality (#7647)
2020-02-09 16:21:48 +01:00
Theo Arends 1a074da0b5 Add BootCount Reset Time to Status
Add BootCount Reset Time as BCResetTime to ``Status 1``
2020-02-07 12:38:10 +01:00
Theo Arends 15df54bb07 Add support for HM-10
Add support for MI-BLE sensors using HM-10 Bluetooth 4.0 module by Christian Staars (#7683)
2020-02-07 10:50:06 +01:00
Theo Arends 48d70bc7bb Add Buzzer commands
Add command ``Buzzer -1`` for infinite mode and command ``Buzzer -2`` for following led mode (#7623)
2020-02-06 16:25:37 +01:00
Theo Arends d779a2b9b4 Add switch modes 11 and 12
Add switch modes 11 (PUSHHOLDMULTI) and 12 (PUSHHOLDMULTI_INV) (#7603)
2020-02-06 14:53:35 +01:00
Theo Arends 12f603cc59 Add support for sensor DHT family using Shelly Add-On
- Fix Hass sensor discovery part 1/4 by Federico Leoni (#7582, #7548)
- Add support for sensor DHT family on Shelly 1 and Shelly 1PM using Shelly Add-On adapter (#7469)
2020-02-06 12:42:31 +01:00
Theo Arends df35a54824 Add link to issue 7469
Add support for sensor DS18x20 on Shelly 1 and Shelly 1PM using Shelly Add-On adapter (#7469)
2020-02-05 16:57:19 +01:00
Theo Arends 186d3fcb4d Add support for Shelly Add-On adapter
Add support for sensor DS18x20 on Shelly 1 and Shelly 1PM using Shelly Add-On adapter
2020-02-05 16:28:56 +01:00
Theo Arends 3d00c4f093 Change wifi connectivity stability
Change wifi connectivity stability (#7602)
2020-01-26 14:30:11 +01:00
Theo Arends ff01f934e2 Bump version 8.1.0.5 2020-01-26 14:20:40 +01:00
Theo Arends 9afbf854cf Add rule trigger on one level deeper
Add rule trigger on one level deeper using syntax with two ``#`` like ``on zigbeereceived#vibration_sensor#aqaracubeside=0 do ...``
2020-01-23 13:03:05 +01:00
Theo Arends fb485dabd3 Add optional parameter <startcolor> to command ``Scheme``
Add optional parameter <startcolor> to command ``Scheme <scheme>, <startcolor>`` to control initial start color
2020-01-22 11:55:48 +01:00
Theo Arends a61c028b66 Add SoftwareSerial to CSE7766 driver
Add SoftwareSerial to CSE7766 driver allowing different GPIOs (#7563)
2020-01-21 16:38:55 +01:00
Theo Arends e8ce1eb641 Fix OTA minimal gzipped detection
Fix OTA minimal gzipped detection regression from 8.1.0.3
2020-01-17 15:38:03 +01:00
Theo Arends a6e95211cc Add more web page sliders
Add web page sliders when ``SetOption37 128`` is active allowing control of white(s)
2020-01-16 14:22:39 +01:00
Theo Arends 0755ad488e Bump version to 8.1.0.4 2020-01-16 11:35:48 +01:00
Theo Arends 5b797a8f4e Add new SwitchMode options
Add ``SwitchMode 8`` ToggleMulti, ``SwitchMode 9`` FollowMulti and ``SwitchMode 10`` FollowMultiInverted (#7522)
2020-01-16 10:39:59 +01:00
Theo Arends 0db458c774 Fix exception 9 restart on log message
Fix exception 9 restart on log message in Ticker interrupt service routines NTP, Wemos and Hue emulation (#7496)
2020-01-14 12:47:48 +01:00
Theo Arends 0e0d8190fa Change some commands displaying all items
Change commands ``Prefix``, ``Ssid``, ``StateText``, ``NTPServer``, and ``FriendlyName`` displaying all items
2020-01-12 13:10:21 +01:00
Theo Arends 95fc96d563 Add support for gzipped binaries
Add support for gzipped binaries
2020-01-06 14:52:04 +01:00
Andre Thomas d3d6014139
- Add support to BMP driver to enter reset state (sleep enable)
- Add support to BMP driver to enter reset state (sleep enable) when deep sleep is used in Tasmota
2020-01-02 22:41:16 +02:00
Theo Arends c4f6a359a7 Add experimental support for NRF24L01 as BLE-bridge
Add experimental support for NRF24L01 as BLE-bridge for Mijia Bluetooth sensors by Christian Baars (#7394)
2020-01-02 16:58:20 +01:00
Theo Arends 1e0550e750 Add command ShutterButton <parameters>
Add command ``ShutterButton <parameters>`` to control shutter(s) by to-scho (#7403)
2020-01-02 15:12:59 +01:00
Theo Arends 01b5df9651 Add optional support for Prometheus
Add optional support for Prometheus using file xsns_91_prometheus.ino (#7216)
2020-01-01 17:17:10 +01:00
Theo Arends 287b3b97f1 Fix some display issues
- Fix LCD line and column positioning (#7387)
- Fix Display handling of hexadecimal escape characters (#7387)
2020-01-01 15:13:58 +01:00
Theo Arends a6cecfcb79 Add support for ADC0 Current Transformer
- Bump version to 8.1.0.2
- Add support for ``AdcParam`` parameters to control ADC0 Current Transformer Apparent Power formula by Jodi Dillon (#7100)
2019-12-30 16:42:53 +01:00
Theo Arends df944ed058 Fix Serial initialization regression
Fix Serial initialization regression from previous fix
2019-12-29 13:27:48 +01:00
Theo Arends 6a06d35626 Add command ``SetOption79 0/1``
Add command ``SetOption79 0/1`` to enable reset of counters at teleperiod time by Andre Thomas (#7355)
2019-12-28 16:33:51 +01:00
Theo Arends ab167b0974 Add more crash dump information 2019-12-28 14:54:26 +01:00
Theo Arends 7295b66310 Add DS1624 support 2019-12-28 10:42:00 +01:00
Theo Arends 9ffbf81fea
Merge pull request #7269 from BASM/development
Added support DS1624 and DS1621 termometer sensor (multiply and hotplug)
2019-12-27 21:06:38 +01:00
Leonid Muravjev 782414c35d ds1624: support for ds1621 and ds1624
[x] the I2C address reservation implemented.
[x] multiple sensors any combination with 8 addresses
[x] with and without HotPlug support
2019-12-27 22:56:16 +03:00
Theo Arends 5682675ac9 Fix some serial interface initializations
Fix Sonoff Bridge, Sc, L1, iFan03 and CSE7766 serial interface to forced speed, config and disable logging
2019-12-27 15:13:40 +01:00
Theo Arends 24aff9b415 Add info to Status 0
- Add SerialConfig to ``Status 1``
- Add WifiPower to ``Status 5``
2019-12-27 11:13:22 +01:00
Theo Arends e8626e9cca Fix command processing
Fix commands ``Display`` and ``Counter`` from overruling command processing (#7322)
2019-12-26 12:26:06 +01:00
Theo Arends 15acf8487d Bump version to 8.1.0.1 2019-12-25 13:28:29 +01:00
Theo Arends 23a78e9a93 Merge branch 'development' into release 2019-12-25 13:01:16 +01:00
Theo Arends b07e6b5386 Add fallback information 2019-12-25 12:59:21 +01:00
Theo Arends 8cf7c6fbc2 Bump version to 8.0.0.3 2019-12-24 17:25:21 +01:00
Theo Arends f829b28ef1 Merge branch 'development' into release 2019-12-24 17:12:24 +01:00
Theo Arends b66cc3479f Add support for user defined GUI button text
Add commands ``WebButton1`` until ``WebButton16`` to support user defined GUI button text (#7166)
2019-12-24 17:10:50 +01:00
Theo Arends a2478f9569 Change number of ``FriendlyName``s from 4 to 8
Change number of ``FriendlyName``s from 4 to 8
2019-12-24 15:06:19 +01:00
Theo Arends def4378499 Add support for ADC0 Moisture
Add support for ``AdcParam`` parameters to control ADC0 Moisture formula by Federico Leoni (#7309)
2019-12-24 12:20:04 +01:00
Theo Arends bafd4cd90a Merge branch 'development' into release 2019-12-23 17:42:22 +01:00
Theo Arends 1f20c36ce4 Update migration info 2019-12-23 17:41:36 +01:00
Theo Arends 5c9e090ce2 Merge branch 'development' into release 2019-12-23 16:01:41 +01:00
Theo Arends a10b199808 Version bump to 8.0.0.2 2019-12-23 15:59:00 +01:00
Theo Arends fb8bb1223a Add support for GPS as NTP server
Add support for GPS as NTP server by Christian Baars and Adrian Scillato
2019-12-23 15:39:07 +01:00
Theo Arends cbaf8c9f1d Merge branch 'development' into release 2019-12-23 14:05:47 +01:00
Theo Arends bf1c48c67e Update migration path 2019-12-23 14:05:26 +01:00
Theo Arends aa6f3b8f88 Merge branch 'development' into release 2019-12-22 17:16:48 +01:00
Theo Arends 7695a2c5bf Change max number of rule ``Var``s to 16
Change max number of rule ``Var``s from 5 to 16 (#4933)
2019-12-22 17:15:47 +01:00
Theo Arends 089a6c66bd Merge branch 'development' into release 2019-12-22 15:36:48 +01:00
Theo Arends c806b22e9d Change max number of rule ``Mem``s to 16
Change max number of rule ``Mem``s from 5 to 16 (#4933)
2019-12-22 15:36:20 +01:00
Theo Arends ad4a7e91ac Add support for max 150 characters
Add support for max 150 characters in most command parameter strings (#3686, #4754)
2019-12-22 15:23:52 +01:00
Theo Arends c51c0dca57 Merge branch 'development' into release 2019-12-21 15:49:56 +01:00