Theo Arends
a59b6b2720
Add abort to UfsRun
2021-02-17 11:06:48 +01:00
Theo Arends
e16ba61dea
Add command UfsRun
2021-02-16 12:19:40 +01:00
Theo Arends
6fa53b85ef
Basic support for filesystem ``autoexec.bat``
2021-02-15 17:29:31 +01:00
Theo Arends
e59174c6a8
Change NeoPixelBus library from v2.6.0 to v2.6.1.4
2021-02-14 14:59:38 +01:00
Theo Arends
99b832cb7b
Update release notes
2021-02-12 15:02:55 +01:00
Theo Arends
27ebcec409
Bump version to 9.2.0.7
2021-02-10 14:45:57 +01:00
Theo Arends
e05b77c372
Increase ESP32 SwitchText to 28
2021-02-05 16:36:25 +01:00
Theo Arends
19ef735c08
ESP32 Increase number of interlock groups from 4 to 14
...
- Removed migration support for versions before v8.1.0 (Doris)
- ESP32 Increase number of interlock groups from 4 to 14
2021-02-05 15:21:06 +01:00
Theo Arends
6836455bbe
Increase number of button GPIOs from 4 to 8
2021-02-05 12:27:59 +01:00
Theo Arends
8b0e45a58b
Increase number of switch GPIOs from 8 to 28
2021-02-05 11:58:24 +01:00
Theo Arends
d5542b1a66
ESP32 increase number of relay GPIOs from 8 to 28
2021-02-04 17:06:45 +01:00
Theo Arends
bfde36e954
Add fragmentation translations
2021-02-04 15:19:59 +01:00
Theo Arends
6084180419
Update changelog
2021-01-29 15:05:47 +01:00
Theo Arends
4c79b24336
Update changelog
2021-01-29 11:14:00 +01:00
Theo Arends
ac8d26982d
Add Sonoff L1 Music Sync control
...
Add command ``L1MusicSync <0|Off>|<1|On>|<2|Toggle>, 1..10, 1..100>`` to control Sonoff L1 Music Sync mode sensitivity and speed (#10722 )
2021-01-28 17:52:17 +01:00
Theo Arends
a3f5d5ce2c
Add commands ``BuzzerActive``, ``BuzzerPwm`` as synonyms for ``SetOption67, 111`` respectively
...
Add commands ``BuzzerActive``, ``BuzzerPwm`` as synonyms for ``SetOption67, 111`` respectively
2021-01-27 16:58:33 +01:00
Theo Arends
f083233b09
Support trailing silence in buzzer tune
...
Support trailing silence in buzzer tune (#10694 )
2021-01-27 16:09:56 +01:00
Theo Arends
12e262d337
Add support for ESP32 ``Module 5`` Wireless Tag Eth01
...
Add support for ESP32 ``Module 5`` Wireless Tag Eth01 (#9496 )
2021-01-27 14:27:05 +01:00
Theo Arends
ff2e1196b5
Update changelog
2021-01-27 10:00:25 +01:00
Theo Arends
b4ceb9e5e9
Add light synonyms
...
Add commands ``ChannelRemap``, ``MultiPWM``, ``AlexaCTRange``, ``PowerOnFade``, ``PWMCT``, ``WhiteBlend``, ``VirtualCT`` as synonyms for ``SetOption37, 68, 82, 91, 92, 105 and 106`` respectively
2021-01-26 14:56:58 +01:00
Theo Arends
bc384a3858
Restore AddLog_P to max 700 chars
...
Changed maximum chars in ``AddLog_P`` logging restored from 128 to 700 (MAX_LOGSZ) to solve broken error messages
2021-01-23 13:21:17 +01:00
Theo Arends
c934a20b4f
Add support for TOF10120
...
Add support for TOF10120 time of flight sensor by Cyril Pawelko (#10190 )
2021-01-22 16:48:41 +01:00
Theo Arends
47ce7c7312
Add rule trigger string comparisons
...
Add rule trigger string comparisons for EndsWith ``$>``, StartsWith ``$<`` and Contains ``$|`` (#10538 )
2021-01-21 14:54:38 +01:00
Theo Arends
4d83b54fda
Update changelog
2021-01-21 14:18:09 +01:00
Theo Arends
15b41881d8
Changed PubSubClient MQTT_SOCKET_TIMEOUT
...
Changed PubSubClient MQTT_SOCKET_TIMEOUT from 15 to 4 seconds
2021-01-20 17:34:47 +01:00
Theo Arends
5561de02fa
Add support for Sugar Valley NeoPool Controller
...
Add support for Sugar Valley NeoPool Controller by Norbert Richter (#10637 )
2021-01-20 17:03:53 +01:00
Theo Arends
35bc095e00
Add support for SM2135 current selection
...
Add support for SM2135 current selection using GPIO ``SM2135 DAT`` index (#10634 )
2021-01-20 11:20:56 +01:00
Theo Arends
47e23082cc
Update changelog
2021-01-17 17:01:52 +01:00
Theo Arends
2dbd1ef973
Add support for 24/26/32/34 bit RFID Wiegand
...
Add support for 24/26/32/34 bit RFID Wiegand interface (D0/D1) by Sigurd Leuther (#3647 , #10565 )
2021-01-16 15:39:33 +01:00
Theo Arends
fdbd1dcc0a
Changed command ``Sleep 0``
...
Changed command ``Sleep 0`` removes any sleep from wifi modem except when ESP32 BLE is active
2021-01-14 17:03:01 +01:00
Theo Arends
f6d7c5c578
Update changelog
2021-01-11 14:13:20 +01:00
Theo Arends
106d30397a
Update RELEASENOTES.md
2021-01-07 18:03:14 +01:00
Theo Arends
696c4ca0e8
Add command ``SetOption43 1..100``
...
Add command ``SetOption43 1..100`` to control Rotary step (#10407 )
2021-01-07 18:01:53 +01:00
Theo Arends
d319bc8ecb
Support rotary encoder on Shelly Dimmer
...
Support rotary encoder on Shelly Dimmer (#10407 )
2021-01-07 17:53:48 +01:00
Theo Arends
23cb8ac559
Support for time proportioned relays
...
Support for time proportioned (``#define USE_TIMEPROP``) and optional PID (``#define USE_PID``) relay control (#10412 )
2021-01-07 15:07:14 +01:00
Theo Arends
d6a24c6fe7
Breaking change ESP32 file system
...
Breaking change ESP32 switch from default SPIFFS to default LittleFS file system loosing current (zigbee) files
2021-01-06 15:28:56 +01:00
Theo Arends
f8de9150d0
Add rotary No Pullup GPIO selection
...
Add rotary No Pullup GPIO selection ``Rotary A/B_n`` (#10407 )
2021-01-06 12:51:12 +01:00
Theo Arends
204316bf1b
Change force initial default state ``SetOption57 1``
...
Change force initial default state ``SetOption57 1`` to scan wifi network every 44 minutes for strongest signal (#10395 )
2021-01-05 17:14:01 +01:00
Theo Arends
fb2c10cb97
Add SPI display driver SSD1331 Color oled
...
Add SPI display driver SSD1331 Color oled by Jeroen Vermeulen (#10376 )
2021-01-04 14:26:27 +01:00
Theo Arends
619e4bbfb5
Add command ``RuleTimer0`` to access all RuleTimers at once
...
Add command ``RuleTimer0`` to access all RuleTimers at once (#10352 )
2021-01-03 17:31:44 +01:00
Theo Arends
d028e5c847
Update changelog
2021-01-03 17:04:14 +01:00
Theo Arends
54c1a2d029
Add support for SPI display driver for ST7789 TFT
...
Add support for SPI display driver for ST7789 TFT by Gerhard Mutz (#9037 )
2021-01-01 15:05:58 +01:00
Theo Arends
58e6ec55f1
Breaking change replacing SPI CS and SPI DC
...
Breaking change replacing SPI CS and SPI DC by device specific CS and DC
2020-12-31 16:17:30 +01:00
Theo Arends
9c2b8040f1
Revert "Breaking change replaced NRF24L01 GPIO selection"
...
This reverts commit 01f3a7da19
.
2020-12-30 17:52:05 +01:00
Theo Arends
01f3a7da19
Breaking change replaced NRF24L01 GPIO selection
...
Breaking change replaced NRF24L01 GPIO selection from ``GPIO_SPI_CS`` by ``GPIO_NRF24_CS`` and ``GPIO_SPI_DC`` by ``GPIO_NRF24_DC``
2020-12-30 17:49:52 +01:00
Theo Arends
37bd2a99f6
Add basic support for ESP32 Odroid Go 16MB binary tasmota32-odroidgo.bin
...
Add basic support for ESP32 Odroid Go 16MB binary tasmota32-odroidgo.bin (#8630 )
2020-12-29 18:03:05 +01:00
Theo Arends
f004cfea60
Breaking change regarding MFRC522 and ILI9341
...
- Replaced MFRC522 13.56MHz rfid card reader GPIO selection from ``GPIO_SPI_CS`` by ``GPIO_RC522_CS``
- Replaced ILI9341 GPIO selection from ``GPIO_SPI_CS`` by ``GPIO_ILI9341_CS`` and ``GPIO_SPI_DC`` by ``GPIO_ILI9341_DC``
2020-12-29 17:42:53 +01:00
Theo Arends
c4410a9823
Update changelog
2020-12-29 10:59:36 +01:00
Theo Arends
d161026534
Add support for Afrikaans language translations by Christiaan Heerze
2020-12-28 11:53:02 +01:00
Theo Arends
83b3aa576d
Add BSSID and Signal Strength Indicator to GUI wifi scan result ( #10253 )
...
Add BSSID and Signal Strength Indicator to GUI wifi scan result (#10253 )
2020-12-27 16:25:34 +01:00
Theo Arends
d75beb92f3
Add support character `#` to be replaced by `space`-character
...
Add support character `#` to be replaced by `space`-character in command ``Publish`` topic (#10258 )
2020-12-26 12:18:16 +01:00
Theo Arends
fbdb0aae0d
Update changelogs
2020-12-24 13:58:32 +01:00
Theo Arends
59992d1954
Add support for FTC532 8-button touch controller
...
Add support for FTC532 8-button touch controller by Peter Franck (#10222 )
2020-12-22 16:47:24 +01:00
Theo Arends
6ea7359821
Update changelog
2020-12-21 15:23:37 +01:00
Theo Arends
85ed1bebca
Fix compile error when ``#ifdef USE_IR_RECEIVE`` is disabled regression from 9.1.0.2
...
Fix compile error when ``#ifdef USE_IR_RECEIVE`` is disabled regression from 9.1.0.2
2020-12-20 17:22:48 +01:00
Theo Arends
09bb1ecb8e
Fix ESP32 LoadStoreError when using ``#define USER_TEMPLATE``
...
Fix ESP32 LoadStoreError when using ``#define USER_TEMPLATE`` (#9506 )
2020-12-20 16:40:49 +01:00
Theo Arends
7599dab36d
Fix Wyze bulb option
2020-12-20 15:25:13 +01:00
Theo Arends
dcfb74f457
Support for GPIO option selection
...
- Support for GPIO option selection
- Gpio ``Option_a1`` enabling PWM1 high impedance if powered off and no fading as used by Wyze bulbs (#10196 )
2020-12-20 13:22:01 +01:00
Theo Arends
9153746d5d
Update changelog
2020-12-19 12:25:55 +01:00
Theo Arends
9fb2f18169
Update changelog
2020-12-19 12:25:02 +01:00
Theo Arends
b7af08c03b
Redesign syslog and mqttlog using log buffer
...
Redesign syslog and mqttlog using log buffer (#10164 )
2020-12-18 15:37:20 +01:00
Theo Arends
0a7d441e65
Add support for P9813 RGB Led MOSFET controller
...
Add support for P9813 RGB Led MOSFET controller (#10104 )
2020-12-17 16:33:26 +01:00
Theo Arends
078a9a258a
Add milliseconds to console output
...
Add milliseconds to console output (#10152 )
2020-12-17 14:16:53 +01:00
Theo Arends
eaa9da7d11
Bump version to v9.2.0.1
2020-12-17 14:03:02 +01:00
Theo Arends
694a675ddf
Update changelog
2020-12-16 14:39:37 +01:00
Jason2866
294a72760c
Update RELEASENOTES.md
2020-12-15 20:18:25 +01:00
Jason2866
5156db1221
Remove mDNS note since it is disabled by default
2020-12-15 20:11:59 +01:00
Theo Arends
b41248eb23
Update changelog
2020-12-15 16:45:25 +01:00
Theo Arends
80434500da
mDNS has been disabled from all pre-compiled binaries to allow new features
...
mDNS has been disabled from all pre-compiled binaries to allow new features
2020-12-08 11:49:11 +01:00
Theo Arends
821270adc1
Update changelog
2020-12-08 11:06:19 +01:00
Theo Arends
d7ed311587
Update changelog
2020-12-07 12:34:09 +01:00
Theo Arends
931929c952
Add support for MFRC522
...
Add support for SPI connected MFRC522 13.56MHz rfid card reader (#9916 )
2020-12-06 16:32:07 +01:00
Theo Arends
80ab642076
Add command ``RfProtocol`` to control RcSwitch
...
Add command ``RfProtocol`` to control RcSwitch receive protocols by BBBits (#10063 )
2020-12-06 14:58:00 +01:00
Theo Arends
75d35d407e
Removed PN532 define USE_PN532_CAUSE_EVENTS
...
Removed PN532 define USE_PN532_CAUSE_EVENTS replaced by generic rule trigger `on pn532#uid=`
2020-12-02 18:01:38 +01:00
Theo Arends
c85dba8c1e
Update changelog
2020-12-02 14:26:40 +01:00
Theo Arends
0c95f2ec8e
Update changelog
2020-11-28 16:10:19 +01:00
Theo Arends
bb85fa95b0
Update changelog
2020-11-27 18:26:56 +01:00
Theo Arends
4b5dbe7a86
Fix reset to defaults after 6 hours of DeepSleep
...
Fix reset to defaults after 6 hours of DeepSleep (#9993 )
2020-11-27 16:43:56 +01:00
Theo Arends
742171ca5e
Add support for multiple WeMo devices
...
Add support for multiple WeMo devices by Magic73 (#9208 )
2020-11-25 18:17:44 +01:00
Theo Arends
3f597001d1
Add support for common anode sevenseg displays
...
Add support for common anode sevenseg displays by adding ``#define USE_DISPLAY_SEVENSEG_COMMON_ANODE`` by Ken Sanislo (#9963 )
2020-11-25 17:30:25 +01:00
Theo Arends
9433b691a4
Fix ESP32 TasmotaClient firmware upgrade
...
Fix ESP32 TasmotaClient firmware upgrade (#9218 )
2020-11-25 14:58:18 +01:00
Theo Arends
547e5d9c5d
Fix command ``gpio``
...
Fix command ``gpio`` using non-indexed functions regression from v9.1.0 (#9962 )
2020-11-24 15:14:22 +01:00
Theo Arends
17c94a2b62
Changed MQTT Wifi connection timeout
...
Changed MQTT Wifi connection timeout from 5000 to 200 mSec (#9886 )
2020-11-17 16:44:00 +01:00
Theo Arends
ab886db6b2
Update change log
2020-11-17 13:56:07 +01:00
Theo Arends
e1963e98dc
Breaking change KNX DPT9 to DPT14
...
- Version bump to 9.1.0.2
- Breaking change KNX DPT9 (16-bit float) to DPT14 (32-bit float) by Adrian Scillato (#9811 , #9888 )
2020-11-17 10:36:57 +01:00
Theo Arends
c02770ce96
Add support for Shelly Dimmer 1 and 2
...
Add support for Shelly Dimmer 1 and 2 by James Turton (#9854 )
2020-11-14 16:43:32 +01:00
Theo Arends
abb56854f5
Update changelog
2020-11-14 13:34:39 +01:00
Theo Arends
203124d678
Add command ``SetOption115 1`` to enable ESP32 MiBle
...
Add command ``SetOption115 1`` to enable ESP32 MiBle
2020-11-13 17:00:44 +01:00
Theo Arends
846da7b6ca
Fix GUI MqttUser and MqttPassword updates
...
Fix GUI MqttUser and MqttPassword updates when TLS is compiled in (#9825 )
2020-11-13 13:54:51 +01:00
Theo Arends
14034ee9d1
Fix KNX buttons, switches and sensors detection
...
Fix KNX buttons, switches and sensors detection regression from v9.1.0 (#9811 )
2020-11-13 11:21:28 +01:00
Theo Arends
9915c9e731
Fixed Telegram group chatid not supported
...
Fixed Telegram group chatid not supported (#9831 )
2020-11-13 09:54:01 +01:00
Theo Arends
4b6465fd10
Add support for fingerprint sensor
...
Add support for AS608 optical and R503 capacitive fingerprint sensor
2020-11-11 17:31:48 +01:00
Theo Arends
75201df20f
Add OTA download path to migration data
2020-11-10 10:39:36 +01:00
Theo Arends
371b00823e
Change Sonoff L1 color up scaling and color margin detection
...
Change Sonoff L1 color up scaling and color margin detection (#9545 )
2020-11-09 15:04:22 +01:00
Theo Arends
85612776f6
Add Tuya commands
...
Add commands ``TuyaRGB``, ``TuyaEnum`` and ``TuyaEnumList`` (#9769 )
2020-11-08 12:51:08 +01:00
Theo Arends
138ddfb16e
Removed version compatibility check
...
Removed version compatibility check
2020-11-07 15:43:52 +01:00
Theo Arends
e498b28864
Add support for EZO PMP sensors
...
Add support for EZO PMP sensors by Christopher Tremblay (#9760 )
2020-11-07 11:35:33 +01:00
Theo Arends
780db5271c
Update changelog
2020-11-07 11:09:16 +01:00
Theo Arends
488a360d5b
Fixed NTP fallback server functionality
...
Fixed NTP fallback server functionality (#9739 )
2020-11-06 15:22:03 +01:00
Theo Arends
cc69244a8f
Changed platformio compiler option
...
Changed platformio compiler option `no target align` enabled for stage
2020-11-05 13:55:17 +01:00
Theo Arends
cdf66b6eff
Version bump
2020-11-05 13:33:17 +01:00
Theo Arends
4d8fab75a8
Add command ``DimmerStep 1..50``
...
Add command ``DimmerStep 1..50`` to change default dimmer up and down step of 10% by James Turton (#9733 )
2020-11-05 10:01:15 +01:00
Theo Arends
78196f0391
Removed auto output selection
...
Removed auto output selection of decimal or hexadecimal data based on user input. Now only based on ``SetOption17``
2020-11-04 17:42:30 +01:00
Theo Arends
8376dd8982
Fix switches
2020-11-04 16:31:53 +01:00
Theo Arends
7915e82cb0
Prep release 9.1
2020-11-04 15:57:40 +01:00
Theo Arends
9f191d9214
Breaking change when ``SetOption73 1``
...
Breaking change when ``SetOption73 1`` JSON result from `{"ACTION":"SINGLE"}` to `{"Button1":{"Action":"SINGLE"}}`
2020-11-03 15:42:55 +01:00
Theo Arends
54f9532919
Add command ``SetOption114 1``
...
Add command ``SetOption114 1`` to detach Swiches from Relays and enable MQTT action state for all the SwitchModes
2020-11-03 14:34:02 +01:00
Theo Arends
b869abb0b6
Fix rule handling of JSON ``null``
...
Fix rule handling of JSON ``null`` regression from v8.5.0.1 (#9685 )
2020-11-02 14:35:19 +01:00
Theo Arends
67bd5daf45
Update changelog
2020-11-02 11:58:23 +01:00
Theo Arends
c2482e9913
Add command ``SwitchText``
...
Add command ``SwitchText`` to change JSON switch names by barbudor (#9691 )
2020-11-01 13:26:35 +01:00
Theo Arends
0057a1dd34
Update template information
2020-11-01 12:01:51 +01:00
Theo Arends
31e5617043
Add command ``Gpios 255``
...
Add command ``Gpios 255`` to show all possible GPIO configurations
2020-10-30 16:08:38 +01:00
Theo Arends
6f7a20e2ec
Add support for EZO PRS sensors
...
Add support for EZO PRS sensors by Christopher Tremblay (#9659 )
2020-10-29 11:53:25 +01:00
Jason2866
187067ee88
Ota url changed to .gz
2020-10-28 18:46:12 +01:00
Theo Arends
d5a71000ea
Change default otaurl
...
Change default otaurl in my_user_config.h to http://ota.tasmota.com/tasmota/release/tasmota.bin.gz
2020-10-28 14:17:45 +01:00
Theo Arends
85d2626e84
Refactor feature list build
2020-10-28 11:37:59 +01:00
Theo Arends
e030b9fece
Fix rule expressions using mems corrupts character pool
...
Fix rule expressions using mems corrupts character pool (#9301 )
2020-10-26 16:42:44 +01:00
Theo Arends
8d71ade035
Fixed rule Break not working as expected
...
Fixed rule Break not working as expected when ONCE is enabled (#9245 )
2020-10-25 17:38:06 +01:00
Theo Arends
a96218fc1c
v9.0.0.3
...
- Add TLS in binary tasmota-zbbridge (#9620 )
- Add support for EZO CO2 sensors by Christopher Tremblay (#9619 )
2020-10-25 14:46:13 +01:00
Theo Arends
b92b59b2b1
Add command ``SetOption113 1``
...
Add command ``SetOption113 1`` to set dimmer low on rotary dial after power off (#8263 )
2020-10-25 12:59:24 +01:00
Theo Arends
582c32f5b9
Add support for EZO EC sensor
...
Add support for EZO EC sensors by Christopher Tremblay (#9613 )
2020-10-24 12:41:08 +02:00
Theo Arends
1021cf3ca5
Update changelog and releasenotes
2020-10-23 16:56:03 +02:00
Theo Arends
0f805014e6
Support WT32-ETH01
...
- Support for fixed output Hi or Lo GPIO
- Support for ESP32 based Wireless-Tag WT32-ETH01 (#9496 )
2020-10-23 15:18:58 +02:00
blakadder
a9c56f7b1c
Update RELEASENOTES.md
2020-10-22 11:30:20 +02:00
Theo Arends
eea472f1fc
Tasmota Arduino Core v2.7.4.5
...
Tasmota Arduino Core v2.7.4.5 allowing webpassword over 47 characters (#9687 )
2020-10-22 11:25:05 +02:00
Theo Arends
83a090b5a9
Rotary driver adjusted for MiDesk if selected
...
Rotary driver adjusted accordingly if Mi Desk Lamp module is selected (#9399 )
2020-10-20 15:13:12 +02:00
Theo Arends
500fb147c4
Add Breaking Changed to Release Notes
...
- Support for EZO RTD sensors by Christopher Tremblay (#9585 )
- On ZigbeeBridge support for glowing led when permit join is active (#9581 )
- Support for PWM Dimmer multi-press and ledmask (#9584 )
2020-10-20 14:04:29 +02:00
Theo Arends
54383f77c4
Change ``#define MQTT_FINGERPRINT``
...
Change ``#define MQTT_FINGERPRINT`` from string to hexnumbers (#9570 )
2020-10-19 12:15:11 +02:00
Theo Arends
38e2638f07
Add support for EZO Ph and ORP sensors
...
Add support for EZO Ph and ORP sensors by Christopher Tremblay (#9567 )
2020-10-18 15:36:17 +02:00
Theo Arends
d9dfaf88f3
Add command ``SwitchMode 15``
...
Add command ``SwitchMode 15`` sending only MQTT message on switch change (#9596 )
2020-10-18 12:17:31 +02:00
Theo Arends
f13f7355f4
Fix TuyaMcu energy display
...
Fix TuyaMcu energy display regression from v8.5.0.1 (#9547 )
2020-10-17 12:48:45 +02:00
Theo Arends
7bc8956d86
Changed management of serial baudrate
...
Changed management of serial baudrate (#9554 )
2020-10-16 15:18:16 +02:00
Theo Arends
98d2dd8f39
Fix rule handling of Var or Mem using text
...
Fix rule handling of Var or Mem using text regression from v8.5.0.1 (#9540 )
2020-10-15 14:42:46 +02:00
Theo Arends
29e73dae9b
Add command ``NoDelay``
...
Add command ``NoDelay`` for immediate backlog command execution by Erik Montnemery (#9544 )
2020-10-15 12:32:40 +02:00
Theo Arends
fc524dff75
Support for Vietnamese language translations
2020-10-12 11:29:36 +02:00
Theo Arends
3264acfffe
Fix Telegram message decoding error regression from v8.5.0.1
2020-10-11 14:23:56 +02:00
Theo Arends
fc04c50674
Convert AdcParam parameters from versions before v9.0.0.2
...
- Command ``Gpio17`` replaces command ``Adc``
- Command ``Gpios`` replaces command ``Adcs``
2020-10-11 11:31:46 +02:00
Theo Arends
b8e55203b6
Fix Thermostat sensor status corruption
...
Fix Thermostat sensor status corruption regression from 8.5.0.1 (#9449 )
2020-10-10 15:19:11 +02:00
Theo Arends
0949dda650
Update changelog/releasenotes
2020-10-10 12:21:04 +02:00
Theo Arends
f0bcd6eb3d
Move (partly) rewritten CHANGELOG.md to root
2020-10-09 16:40:10 +02:00
Theo Arends
d5b8d6ae24
Add support for analog buttons
...
Add support for analog buttons indexed within standard button range
2020-10-08 18:27:12 +02:00
Theo Arends
e8c1e44069
Add PWMD and IRremote features
...
- Add PWM dimmer color/trigger on tap, SO88 led, DGR WITH_LOCAL flag by Paul Diem (#9474 )
- Add support for stateful ACs using ``StateMode`` in tasmota-ir.bin by Arik Yavilevich (#9472 )
2020-10-07 10:07:17 +02:00
Theo Arends
0c90f71e00
Fix ADC initalization sequence
...
Fix ADC initalization sequence (#9473 )
2020-10-06 12:12:14 +02:00
Theo Arends
539ba11690
Add support for inverted NeoPixelBus data
...
Add support for inverted NeoPixelBus data line by enabling ``#define USE_WS2812_INVERTED`` (#8988 )
2020-10-05 19:03:40 +02:00
Theo Arends
0eef729d8f
Remove migration support from before 7.0
...
- Remove support for direct upgrade from Tasmota versions before 7.0
- Remove auto config update for all Friendlynames and Switchtopic from Tasmota versions before 8.0
2020-10-05 18:12:32 +02:00
Theo Arends
f0ab0d274d
Change NeoPixelBus library from v2.5.0.09 to v2.6.0
2020-10-05 17:32:30 +02:00
Theo Arends
1f49daacd3
Fix light wakeup exception 0
...
Fix light wakeup exception 0 (divide by zero) when ``WakeupDuration`` is not initialised (#9466 )
2020-10-05 15:16:43 +02:00
Theo Arends
d442b64d90
Fix shutter timing problem
...
Fix shutter timing problem due to buffer overflow in calibration matrix (#9458 )
2020-10-05 12:56:12 +02:00
Theo Arends
96b2c8010e
Change ``Status`` command output for disabled status types
...
Change ``Status`` command output for disabled status types
2020-10-05 11:45:58 +02:00
Theo Arends
3c9583e1ff
Fix exception 28 due to device group buffer overflow
...
Fix exception 28 due to device group buffer overflow (#9459 )
2020-10-04 17:46:45 +02:00
Theo Arends
677bb85ecd
Fix ledlink blink when no network connected
...
Fix ledlink blink when no network connected regression from 8.3.1.4 (#9292 )
2020-10-04 17:08:11 +02:00
Theo Arends
d100ba3592
Update changelog and releasenotes
2020-10-04 12:48:26 +02:00
Theo Arends
ad3cfa6cbb
Add SDM630 three phase ImportActive Energy display
...
Add SDM630 three phase ImportActive Energy display when ``#define SDM630_IMPORT`` is enabled by Janusz Kostorz (#9124 )
2020-10-03 12:46:58 +02:00
Theo Arends
dab734ad3f
Update v9.0.0.1 information
2020-10-03 12:08:43 +02:00
Theo Arends
a9630b9d05
Change pulsetime to allow use for all relays
...
Change pulsetime to allow use for all relays with 8 interleaved so ``Pulsetime1`` is valid for Relay1, Relay9, Relay17 etc. (#9279 )
2020-10-02 17:32:45 +02:00
Theo Arends
d07fa4b492
Change A4988 optional microstep pin selection
2020-10-02 17:09:09 +02:00
Theo Arends
330109d67c
Add optional support for Orno WE517
...
Add optional support for Orno WE517-Modbus energy meter by Maxime Vincent (#9353 )
2020-10-02 16:37:43 +02:00
Theo Arends
6585fc07e8
Change MAX31865 driver to support up to 6 thermocouples
...
Change MAX31865 driver to support up to 6 thermocouples selected by ``MX31865 CS`` instead of ``SSPI CS`` (#9103 )
2020-10-02 16:11:13 +02:00
Theo Arends
72d561e9be
Change new IR Raw compact format ( #9444 )
2020-10-02 14:35:11 +02:00
Theo Arends
dcb0b68a21
Merge branch 'development' into dev-gpio16
2020-10-02 12:24:34 +02:00
Theo Arends
dd95b4a8cd
Bump dev version to 9.0.0.1
2020-10-02 12:22:01 +02:00
Theo Arends
c6115a3516
Update changelog and releasenotes
2020-09-30 15:44:37 +02:00
Theo Arends
7b567d23ea
Force rebuild
2020-09-29 14:43:11 +02:00
Theo Arends
5cf40fc059
Add support for VL53L1X time of flight sensor
...
Add support for VL53L1X time of flight sensor by Johann Obermeier
2020-09-29 11:27:53 +02:00
Theo Arends
b95a193711
Update changelog
2020-09-27 12:57:49 +02:00
Theo Arends
2b160912f5
Fix Shelly 2.5 higher temperature
...
Fix Shelly 2.5 higher temperature regression from 8.2.0.1 (#7991 )
2020-09-24 12:07:23 +02:00
Theo Arends
2bf98839e8
Update changelog and release notes
2020-09-22 11:47:41 +02:00
Theo Arends
afd197d493
Add command ``SetOption111 1``
...
Add command ``SetOption111 1`` to enable frequency output for buzzer GPIO (#8994 )
2020-09-15 11:44:09 +02:00
Theo Arends
26e041ab6e
Fix reset BMP sensors
...
Fix reset BMP sensors when executing command ``SaveData`` and define USE_DEEPSLEEP enabled (#9300 )
2020-09-14 12:26:32 +02:00
Theo Arends
9aa18c23f0
Add support for MLX90640
...
Add support for MLX90640 IR array temperature sensor by Christian Baars
2020-09-14 11:49:33 +02:00
Theo Arends
0e5c1c31ef
Update RELEASENOTES.md
2020-09-09 12:44:30 +02:00
Theo Arends
05c153c7b1
Update change log
2020-09-09 11:22:34 +02:00
Theo Arends
5176e3ab02
Bump version to 8.5.0.1
2020-09-07 14:54:31 +02:00
Theo Arends
201bad3eb0
Prep release 8.5
2020-09-06 18:41:39 +02:00
Theo Arends
77375b3d9c
Change thehackbox.org to ota.tasmota.com
2020-08-29 17:50:44 +02:00
Theo Arends
0f1e4fc917
Add command ``PowerDelta1`` to ``PowerDelta3``
...
- Bump version to 8.4.0.3
- Add command ``PowerDelta1`` to ``PowerDelta3`` to trigger on up to three phases (#9134 )
2020-08-23 18:29:16 +02:00
Theo Arends
4724fa2c49
Add support for DYP ME007
...
Add support for DYP ME007 ultrasonic distance sensor by Janusz Kostorz (#9113 )
2020-08-17 16:25:24 +02:00
Theo Arends
731ca297b0
Add better config corruption recovery
...
- Add better config corruption recovery (#9046 )
- Remove support for 1-step upgrade from versions before 6.6.0.11 to versions after 8.4.0.1
2020-08-13 13:04:28 +02:00
Theo Arends
f268697e54
Add command ``Restart 2`` to halt system
...
Add command ``Restart 2`` to halt system. Needs hardware reset or power cycle to restart (#9046 )
2020-08-10 16:19:44 +02:00
Theo Arends
ce388c799f
Add ESP32 Analog input support for GPIO32 to GPIO39
2020-08-04 16:33:05 +02:00
Theo Arends
1d990ad091
Fix ESP32 PWM range
2020-08-03 11:52:25 +02:00
Theo Arends
70c7f38a1f
Release 8.4.0
2020-07-29 16:58:07 +02:00
Theo Arends
ba3856d900
Change IRRemoteESP8266 library
...
Change IRRemoteESP8266 library from v2.7.6 to v2.7.8.10, fixing Samsung and Pioneer protocols (#8938 )
2020-07-29 14:44:45 +02:00
Theo Arends
69e252b7d7
Prep release 8.4.0
2020-07-29 10:31:38 +02:00
Theo Arends
b1f98f5711
Add tasmota-zbbridge support
2020-07-28 09:25:48 +02:00
Theo Arends
3acae81fc0
Change Domoticz commands prefix from ``Domoticz`` to ``Dz``
...
- Change Domoticz commands prefix from ``Domoticz`` to ``Dz``
- Add command ``DzSend<type> <index>,<value1(;value2)|state>`` to send values or state to Domoticz
2020-07-24 15:30:21 +02:00
Theo Arends
72e3765a55
Add command (``S``)``SerialSend6`` \<comma seperated values\>
...
Add command (``S``)``SerialSend6`` \<comma seperated values\> (#8937 )
2020-07-21 12:42:18 +02:00
Theo Arends
eb4164e713
Update RELEASENOTES.md
2020-07-21 11:03:03 +02:00
Theo Arends
4584effbce
Change all timer references from ``Arm`` to ``Enable``
...
Change all timer references from ``Arm`` to ``Enable`` in GUI, ``Timer`` command and JSON message
2020-07-21 10:44:45 +02:00
Theo Arends
23da6285c1
Add command ``SetOption100 0/1``
...
Add command ``SetOption100 0/1`` to remove ``ZbReceived`` value from ``{"ZbReceived":{xxx:yyy}}`` JSON message
2020-07-19 15:57:37 +02:00
Theo Arends
934ca43463
Remove Arduino ESP8266 Core support before 2.7.1
...
Remove Arduino ESP8266 Core support for versions before 2.7.1
2020-07-17 11:49:56 +02:00
Theo Arends
6b0870343b
Change to limited support of Arduino IDE
...
Change to limited support of Arduino IDE as an increasing amount of features cannot be compiled with Arduino IDE
2020-07-16 18:21:19 +02:00
Theo Arends
fec0fa47ca
Update RELEASENOTES.md
2020-07-15 12:07:19 +02:00
Theo Arends
6843f58a91
Add support for Schneider Electric iEM3000
...
Add support for Schneider Electric iEM3000 series Modbus energy meter by Marius Bezuidenhout
2020-07-14 17:37:14 +02:00
Theo Arends
202326c5f3
Update changelog
2020-07-12 15:34:02 +02:00
halfbakery
387800adc5
Update RELEASENOTES.md
...
More devices supported without additional scripting
2020-07-09 19:39:11 +02:00
Theo Arends
642fa216c2
Merge branch 'development' into pre-release
2020-07-04 12:04:41 +02:00
Theo Arends
0cc1dd957b
Add SO98 to control user rotary support
2020-07-02 18:13:14 +02:00
Theo Arends
e52961b3b4
Add rotary encoder support
...
- Add rotary encoder support for light dimmer and optional color temperature if button1 still pressed (#8670 )
- Fix Mi Desk Lamp brightness control (#8748 )
2020-06-30 16:58:36 +02:00
Theo Arends
faecd38006
Add compile time User Template
...
Add compile time User Template (#8766 )
2020-06-24 16:37:02 +02:00
Theo Arends
7c8b06ce16
Add compile time interlock parameters
...
Add compile time interlock parameters (#8759 )
2020-06-22 22:36:54 +02:00
Theo Arends
c533eb1186
BLM certify part 2
...
- Change define USE_TASMOTA_SLAVE into USE_TASMOTA_CLIENT
- Change commands ``SlaveSend`` and ``SlaveReset`` into ``ClientSend`` and ``ClientReset``
2020-06-18 16:05:55 +02:00
Theo Arends
2af506e48b
Change ESP32 USER GPIO template representation decreasing template message size
...
Change ESP32 USER GPIO template representation decreasing template message size
2020-06-18 12:55:10 +02:00
Theo Arends
934526244f
Add support for single wire LMT01
...
Add support for single wire LMT01 temperature Sensor by justifiably (#8713 )
2020-06-17 17:22:41 +02:00
Theo Arends
7c785ab056
Add support for Energy sensor (Denky)
...
Add support for Energy sensor (Denky) for French Smart Metering meter provided by global Energy Providers
2020-06-17 15:00:48 +02:00
Theo Arends
5730ced6b8
Merge pull request #8695 from hallard/teleinfo
...
Prep for French Metering xnrg_15_teleinfo
2020-06-17 14:42:22 +02:00
Theo Arends
83bbe757db
Add command ``Module2``
...
Add command ``Module2`` to configure fallback module on fast reboot (#8464 )
2020-06-17 14:06:46 +02:00
Charles
fae80fc9dc
Merge branch 'development' into teleinfo
2020-06-16 19:04:39 +02:00
Theo Arends
715697cb32
Add ESP32 ethernet commands
...
Add ESP32 ethernet commands ``EthType 0/1``, ``EthAddress 0..31`` and ``EthClockMode 0..3`` (#8503 )
2020-06-16 18:36:49 +02:00
Charles
3b8c83deb1
Merge branch 'development' into teleinfo
2020-06-15 22:29:53 +02:00
Charles
93a38e892c
@s-hadinger requests before merging PR
2020-06-15 21:52:47 +02:00
Theo Arends
ef0b797686
Add basic support for ESP32 ethernet
...
Add basic support for ESP32 ethernet adding commands ``Wifi 0/1`` and ``Ethernet 0/1`` both default ON (#8503 )
2020-06-15 18:27:04 +02:00
Charles
ae9e770950
Merge branch 'development' into teleinfo
2020-06-15 10:22:44 +02:00
Theo Arends
cdf7aa74bf
Add rule trigger ``System#Init``
...
Add rule trigger ``System#Init`` to allow early rule execution without wifi and mqtt initialized yet (#8673 )
2020-06-14 12:36:44 +02:00
Charles
4929d3c8e5
Added French Metering Teleinfo
2020-06-12 21:53:26 +02:00
Theo Arends
03cd543127
Add support for HP303B
...
Add support for HP303B Temperature and Pressure sensor by Robert Jaakke (#8638 )
2020-06-12 12:38:52 +02:00
Theo Arends
4c5b2f37fd
Add initial support for Telegram
...
Add initial support for Telegram bot (#8619 )
2020-06-11 17:30:33 +02:00
Theo Arends
e54c85f83e
Add full support for BL0940
...
Add support for BL0940 energy monitor as used in Blitzwolf BW-SHP10 (#8175 )
2020-06-07 17:59:54 +02:00
Theo Arends
41f77f688c
Add command ``SetOption94 0/1``
...
Add command ``SetOption94 0/1`` to select MAX31855 or MAX6675 thermocouple support (#8616 )
2020-06-04 11:36:58 +02:00
device111
8c29ead09d
Add support for up to eight MCP9808 temperature sensors
2020-06-02 08:35:49 +02:00
Theo Arends
eafaccfcda
Add support for up to two BH1750 sensors
...
Add support for up to two BH1750 sensors controlled by commands ``BH1750Resolution`` and ``BH1750MTime`` (#8139 )
2020-06-01 18:00:56 +02:00
Theo Arends
29070f1136
Add ``CpuFrequency`` and ``FlashFrequency`` to status 0
...
- Add ``CpuFrequency`` to ``status 2``
- Add ``FlashFrequency`` to ``status 4``
2020-05-30 14:59:52 +02:00
Theo Arends
66233b1749
Add support for full MAC address
...
Add support for unique MQTTClient (and inherited fallback topic) by full Mac address using ``mqttclient DVES_%12X`` (#8300 )
2020-05-26 17:08:13 +02:00
Theo Arends
bacb730b53
Fix escape of non-JSON received serial data
...
Fix escape of non-JSON received serial data (#8329 )
2020-05-26 12:35:21 +02:00
Theo Arends
90d3cd45c4
Add command ``Time 4``
...
Add command ``Time 4`` to display timestamp using milliseconds (#8537 )
2020-05-25 11:44:17 +02:00
Theo Arends
6073bd9eb6
Update changelog
2020-05-24 11:55:39 +02:00
Theo Arends
ca8b38d0d0
Add LedPwm commands
...
Add commands ``LedPwmOn 0..255``, ``LedPwmOff 0..255`` and ``LedPwmMode1 0/1`` to control led brightness by George (#8491 )
2020-05-23 15:17:13 +02:00
Theo Arends
93ca102391
Change ExportActiveTariff to ExportTariff
2020-05-22 18:31:14 +02:00
Theo Arends
855e054db8
Change Energy JSON data
...
- Bump version 8.3.1.2
- Change Energy JSON Total field from ``"Total":[33.736,11.717,16.978]`` to ``"Total":33.736,"TotalTariff":[11.717,16.978]``
- Change Energy JSON ExportActive field from ``"ExportActive":[33.736,11.717,16.978]`` to ``"ExportActive":33.736,"ExportActiveTariff":[11.717,16.978]``
- Add Three Phase Export Active Energy to SDM630 driver
2020-05-22 17:48:21 +02:00
Theo Arends
86921e60b2
Add support for VEML6075 and VEML7700
...
- Add support for VEML6075 UVA/UVB/UVINDEX Sensor by device111 (#8432 )
- Add support for VEML7700 Ambient light intensity Sensor by device111 (#8432 )
2020-05-22 15:16:01 +02:00
Theo Arends
e5942df57f
Update Change log
2020-05-21 17:06:52 +02:00
Theo Arends
cd7f719563
Add more functionality to ``Switchmode`` 11 and 12 ( #8450 )
...
Add more functionality to ``Switchmode`` 11 and 12 (#8450 )
2020-05-19 15:52:10 +02:00
Theo Arends
e1fbf64037
Add command ``Rule0``
...
Add command ``Rule0`` to change global rule parameters
2020-05-19 11:15:31 +02:00
Theo Arends
ebbdb28e48
Bump version to 8.3.1.1
2020-05-18 17:06:11 +02:00
Theo Arends
ad427b62ac
Update RELEASENOTES.md
2020-05-18 14:23:47 +02:00
Theo Arends
66250a6b97
Merge branch 'development' into pre-release
2020-05-18 14:21:28 +02:00
Theo Arends
7241b9d37c
Prep release 8.3.1
2020-05-18 14:12:44 +02:00
Theo Arends
2055d06825
Merge branch 'development' into pre-release
2020-05-18 10:06:12 +02:00
Theo Arends
d7f6c78ed9
Add command ``DeviceName``
...
Add command ``DeviceName`` defaults to FriendlyName1 and replaces FriendlyName1 in GUI
2020-05-17 17:10:17 +02:00
Theo Arends
c11952595e
Change QPC detection from 4 to 7 power interrupts
...
Change Quick Power Cycle detection from 4 to 7 power interrupts (#4066 )
2020-05-16 11:22:48 +02:00
Theo Arends
eed6564405
Merge branch 'development' into pre-release
2020-05-14 15:35:30 +02:00
Theo Arends
fff26f6538
Fix button default state
...
- Fix button default state
- Bump version 8.3.0.1
2020-05-14 15:32:27 +02:00
Jason2866
31fe729649
Core 2.7.1.not 2.7.0
2020-05-14 12:50:47 +02:00
Theo Arends
4e05975b6c
Sync with released 8.3.0
2020-05-14 12:40:48 +02:00
Theo Arends
878f3da25c
Merge branch 'development' into pre-release
2020-05-10 14:59:41 +02:00
Theo Arends
ec045445e6
Enable rule compression in my_user_config.h
2020-05-10 14:39:13 +02:00
Theo Arends
0404adf4a2
Merge branch 'development' into pre-release
2020-05-10 11:28:17 +02:00
Theo Arends
89b130b45a
Change root rule trigger
...
Add rule trigger at root level like ``on loadavg<50 do power 2 endon`` after ``state`` command
2020-05-10 11:09:34 +02:00
Theo Arends
bf215b1b9d
Update root level triggers
...
Add rule trigger ``#`` to trigger on any root value like ``on #loadavg<50 do power 2 endon`` after ``state`` command
2020-05-09 19:33:19 +02:00
Theo Arends
92c05faa8b
Add root level triggers as discussed on Discord
...
- Add rule trigger ``root#`` to trigger on any root value like ``on root#loadavg<50 do power 2 endon`` after ``state`` command
2020-05-09 19:22:12 +02:00
Theo Arends
0572644c7f
Change PWM Frequencies
...
- Change default PWM Frequency to 977 Hz from 880 Hz
- Change minimum PWM Frequency from 100 Hz to 40 Hz
2020-05-08 16:06:02 +02:00
Theo Arends
b00463900b
Merge branch 'development' into pre-release
2020-05-07 18:14:34 +02:00
Theo Arends
d78ca09c30
Integrate OpenTherm and WindMeter
2020-05-07 16:03:27 +02:00
Theo Arends
e2da3e432e
Merge branch 'development' into pre-release
2020-05-05 14:31:43 +02:00
Theo Arends
5d18ad1c74
Add experimental basic support for ESP32
...
- Add experimental basic support for Tasmota on ESP32 based on work by Jörg Schüler-Maroldt
- Bump version to 8.2.0.6
- This ESP32 upgrade breaks current ESP32 templates
2020-05-01 17:30:09 +02:00
Theo Arends
ade7b4b96e
Merge branch 'development' into pre-release
2020-04-28 16:05:06 +02:00
Theo Arends
4536746d03
Update Changelog and Release notes
2020-04-28 11:09:56 +02:00
Theo Arends
14040f601c
Breaking Change Device Groups multicast address and port
...
- Breaking Change Device Groups multicast address and port (#8270 )
- Version bump 8.2.0.5
2020-04-25 11:20:48 +02:00
Theo Arends
1af24ddcf5
Update changelog
2020-04-22 16:36:27 +02:00
Theo Arends
6c5e9a89c4
Add command ``SO`` as shortcut for command ``SetOption``
2020-04-21 09:48:27 +02:00
Theo Arends
c977069df5
Merge branch 'development' into pre-release
2020-04-20 18:31:20 +02:00
Theo Arends
0b08c72247
Add command ``SetOption73 1`` for button decoupling
...
Add command ``SetOption73 1`` for button decoupling and send multi-press and hold MQTT messages by Federico Leoni (#8235 )
2020-04-20 17:47:40 +02:00
Theo Arends
d3b2f8c489
Add config version tag
...
- Add config version tag
- Bump version 8.2.0.4
2020-04-17 11:57:09 +02:00
Theo Arends
1c91a3a4f7
Merge branch 'development' into pre-release
2020-04-14 12:39:19 +02:00
Theo Arends
5db2ac1955
Add commands ``GlobalTemp`` and ``GlobalHum``
...
Add commands ``GlobalTemp`` and ``GlobalHum`` to init sensor data (#8152 )
2020-04-13 14:40:29 +02:00
Theo Arends
baf3b9b662
Add command ``Palette``
...
Add command ``Palette`` to add the ability to specify a palette of colors (#8150 )
2020-04-13 12:19:16 +02:00
Theo Arends
1972f85616
Merge branch 'development' into pre-release
2020-04-12 14:54:28 +02:00
Theo Arends
42d82fdc97
Fix PMS5003 input range
2020-04-12 14:54:06 +02:00
Theo Arends
0c24651ed0
Add interval to PMS5003 sensor
...
Add interval to PMS5003 sensor to extend lifetime (#8128 )
2020-04-12 12:35:58 +02:00
Theo Arends
b5512b6d13
Merge branch 'development' into pre-release
2020-04-11 14:51:32 +02:00
Theo Arends
45e9408b73
Add support for AS3935 Lightning Sensor
...
Add support for AS3935 Lightning Sensor by device111 (#8130 )
2020-04-11 14:51:08 +02:00
Theo Arends
13d7943b58
Add support for Seven Segment display
...
Add support for Seven Segment display using HT16K33 (#8116 )
2020-04-10 16:05:43 +02:00
Theo Arends
afb8c60093
Add support for an iAQ sensor ( #8107 )
...
Add support for an iAQ sensor (#8107 )
2020-04-10 15:13:01 +02:00
Theo Arends
03e61701e4
Merge branch 'development' into pre-release
2020-04-09 12:49:24 +02:00
Theo Arends
6f51fd4763
Update Changelog and Release Notes
2020-04-09 12:47:47 +02:00
Theo Arends
d080bb97b8
Prep release 8.3.0
2020-04-09 11:58:35 +02:00
Theo Arends
ac7c8c210b
Merge branch 'development' into pre-release
2020-04-09 11:54:21 +02:00
Theo Arends
e69f103755
Small change to Settings var names
2020-04-09 11:40:26 +02:00
Theo Arends
c7aeadcd6b
Merge branch 'development' into pre-release
2020-04-07 17:26:01 +02:00
Theo Arends
8b7aca39f2
Update changelog and release notes
2020-04-07 17:25:37 +02:00
Theo Arends
05af60074f
Add quick wifi connect using saved AP parameters
...
Add quick wifi connect using saved AP parameters when ``SetOption56 0`` (#3189 )
2020-04-07 12:19:54 +02:00
Theo Arends
7845dae2df
Update core info
2020-04-05 14:40:47 +02:00
Theo Arends
4b98e9dfb2
Merge branch 'development' into pre-release
2020-04-05 14:33:47 +02:00
Theo Arends
49febe4a54
Add BH1750 Measurement Time control
...
Add command ``Sensor10 31..254`` to control BH1750 measurement time which defaults to 69 (#8016 )
2020-04-02 15:17:54 +02:00
Theo Arends
4b09af8a36
Add BH1750 resolution control
...
Add command ``Sensor10 0/1/2`` to control BH1750 resolution - 0 = High (default), 1 = High2, 2 = Low (#8016 )
2020-04-01 16:46:12 +02:00
Theo Arends
ec899817aa
Change some deepsleep wake messages
...
- Change remove MQTT Info messages on restart for DeepSleep Wake (#8044 )
- Add command ``SetOption90 1`` to disable non-json MQTT messages (#8044 )
2020-04-01 14:05:30 +02:00
Theo Arends
39d8011c89
Change light scheme 2,3,4 cycle time
...
Change light scheme 2,3,4 cycle time speed from 24,48,72,... seconds to 4,6,12,24,36,48,... seconds (#8034 )
2020-03-31 17:27:33 +02:00
Theo Arends
7ebb5f3cb9
Add commands ``CounterDebounceLow`` and ``CounterDebounceHigh``
...
Add commands ``CounterDebounceLow`` and ``CounterDebounceHigh`` to control debouncing (#8021 )
2020-03-31 16:30:30 +02:00
blakadder
dd9f7920de
changed links to new docs architecture
2020-03-29 23:28:41 +02:00
Theo Arends
d713468c0c
Add support for longer template names
...
Add support for longer template names
2020-03-29 17:41:31 +02:00
Theo Arends
257dd18796
Add console command history ( #7483 , #8015 )
...
Add console command history (#7483 , #8015 )
2020-03-29 15:35:58 +02:00
Theo Arends
dbc9f16ffc
Add support for up to four MQTT GroupTopics
...
- Bump version to 8.2.0.2
- Add support for up to four MQTT GroupTopics using the same optional Device Group names (#8014 )
2020-03-28 16:48:36 +01:00
Theo Arends
0a573bd0d6
Update changelog and releasenotes
2020-03-23 15:19:08 +01:00
Theo Arends
5471de6f1c
Change GPIO initialization solving possible Relay toggle on (OTA) restart
...
Change GPIO initialization solving possible Relay toggle on (OTA) restart
2020-03-22 17:42:32 +01:00
Theo Arends
b6fc31ebb0
Bump version 8.2.0.1
...
- Bump version 8.2.0.1
- Change HM-10 sensor type detection and add features (#7962 )
2020-03-21 15:46:28 +01:00
Theo Arends
211520b1c8
Bump version 8.2.0
2020-03-21 11:22:22 +01:00
Theo Arends
eb24fc914e
Merge branch 'development' into release
2020-03-19 15:59:53 +01:00
Theo Arends
ca07ab5417
Prep for release
2020-03-19 15:58:37 +01:00
Theo Arends
efc444f729
Merge branch 'development' into release
2020-03-18 16:17:31 +01:00
Theo Arends
18729bcc41
Add support for ElectriQ iQ-wifiMOODL
...
Add support for ElectriQ iQ-wifiMOODL RGBW light by ianbyte (#7947 )
2020-03-18 12:32:13 +01:00