2337 Commits

Author	SHA1	Message	Date
Theo Arends	e5942df57f	Update Change log	2020-05-21 17:06:52 +02:00
Theo Arends	1edc02b64f	Merge pull request #8501 from gemu2015/scripter-fix ... fix scripter unishox error	2020-05-21 08:36:39 +02:00
Theo Arends	9e804c7ef8	Merge pull request #8500 from pcdiem/pwm-dimmer-11 ... Publish state when dimmer button tapped	2020-05-21 08:36:23 +02:00
Theo Arends	bae652280d	Merge pull request #8499 from effelle/development ... HAss: Fix slider for PWM_MODULE	2020-05-21 08:35:53 +02:00
Theo Arends	f3a577d0fc	Merge pull request #8497 from arijav/new_branch ... Update thermostat controller with 2 new commands	2020-05-21 08:35:26 +02:00
gemu2015	fca5dc9471	Update xdrv_10_scripter.ino	2020-05-21 08:13:26 +02:00
gemu2015	edaf6c493e	fix scripter unishox error, add 2 y axes line graph to google charts	2020-05-21 06:06:42 +02:00
Paul C Diem	9b519700c1	Publish state when dimmer button tapped	2020-05-20 20:55:02 -05:00
Federico Leoni	5e6010d1d0	Fix slider for PWM_MODULE	2020-05-20 22:11:07 -03:00
Javier Arigita	f880d058ed	Bugfix	2020-05-20 22:21:25 +02:00
Javier Arigita	7b42e6f338	Duty cycle output added, as well as possibility to disable physical output	2020-05-20 22:10:49 +02:00
Stephan Hadinger	b7f932391a	Change IRremoteESP8266 library updated to v2.7.7	2020-05-20 12:42:34 +02:00
George	833d89203f	Fix settings delta fail ... bugfix - settings always default on boot *Moved block to right scope *Got version number right duh	2020-05-20 13:25:11 +10:00
George	603b628f97	Add pwm mode masking ... * Extra setting & command to set - allows masking of pwm mode. Use case is for leds attached to buttons for seeing at night; this way user can combine both pwm and digital leds (i.e. pwm for the button leds but non-button status leds can stay on/off).	2020-05-20 13:23:54 +10:00
George	e21cbfdc5d	More sensible behaviour ... * When setting PWM values, updates all the LEDs (instant response). Uses led_power values. * If LEDLINK not set, but LED1 is, LED1 is the status led. When turning on/off, setledlink uses digitalwrite (which does not respect the new pwm operation). In this case only, we will use the setledpoweridx instead of digitalwrite - costly (every 250ms this runs), but edge case / legacy. Allows more intuitive operation - if we blink an LED with the max and min PWM limits, we'd expect it to respect these. In this case, blink will also now update the led_power status, which keeps this accurate e.g. if ledpower 1 cmnd was sent, then blink occurred, led_state would read a 1 for that bit but the led would be off (but nothing was reading it for status so it didn't cause any trouble). Leaving digitalwrite when LEDLINK is defined as this is more efficient and the use case for pwm leds is to find buttons - link indicator would become more ambiguous for no benefit.	2020-05-20 13:23:53 +10:00
George	bea58f223f	Oops ... Compile error. Forgot bracket.	2020-05-20 13:23:53 +10:00
George	fb179c27af	Fixes ... * Setting commands don't update if no data is sent * Didn't understand how pin mapping worked duh. Fixed.	2020-05-20 13:23:53 +10:00
George	bd33574ee7	Align new settings to 2B boundaries ... Attempting to fix settings not working correctly (might have mucked up the boundaries and compiler put a padding byte in).	2020-05-20 13:23:53 +10:00
George	ce2696fef0	Fix compile errors ... Missing brackets and semicolons of course. Blame python.	2020-05-20 13:23:53 +10:00
George	a305f435e8	First pass at led pwm settings ... * Added settings for ledpwm_on and ledpwm_off with defaults that mimic current digitalwrite function * Changed ledpoweridx from digitalwrite to analogwrite * Add commands to change new settings	2020-05-20 13:23:52 +10:00
gemu2015	5921055e2f	scripter update ... script compression option more google charts (histogram, tables, gauges) smal bug fixes	2020-05-19 16:44:01 +02:00
Theo Arends	cd7f719563	Add more functionality to ``Switchmode`` 11 and 12 (#8450) ... Add more functionality to ``Switchmode`` 11 and 12 (#8450)	2020-05-19 15:52:10 +02:00
Theo Arends	e1fbf64037	Add command ``Rule0`` ... Add command ``Rule0`` to change global rule parameters	2020-05-19 11:15:31 +02:00
Theo Arends	ebbdb28e48	Bump version to 8.3.1.1	2020-05-18 17:06:11 +02:00
Theo Arends	d8d9e334f6	Add ValidTemplate function	2020-05-18 17:02:24 +02:00
bovirus	6c99b89788	Italian language update	2020-05-18 16:17:22 +02:00
Theo Arends	a63d703a88	Merge branch 'development' into pre-release	2020-05-18 15:32:15 +02:00
Theo Arends	d61c1b001d	Merge pull request #8473 from gemu2015/ra8876_esp32 ... ra8876 esp32	2020-05-18 15:29:52 +02:00
gemu2015	769f69d049	remove debug print	2020-05-18 15:02:27 +02:00
Adrian Scillato	6ab98e5e16	Update Spanish Translation	2020-05-18 09:45:17 -03:00
Theo Arends	66250a6b97	Merge branch 'development' into pre-release	2020-05-18 14:21:28 +02:00
Theo Arends	9d15381f11	Merge branch 'development' of https://github.com/arendst/Tasmota into development	2020-05-18 14:12:58 +02:00
Theo Arends	7241b9d37c	Prep release 8.3.1	2020-05-18 14:12:44 +02:00
gemu2015	e043788de8	scripter support for google charts in WEBUI	2020-05-18 10:29:32 +02:00
gemu2015	88627a5a41	support for jpeg pictures on color lcds	2020-05-18 10:25:18 +02:00
gemu2015	21656fdd81	ra8876 esp32	2020-05-18 10:19:13 +02:00
Theo Arends	2055d06825	Merge branch 'development' into pre-release	2020-05-18 10:06:12 +02:00
Theo Arends	dcde10eac4	Merge pull request #8470 from effelle/development ... HA Discovery: Oops! New DeviceName	2020-05-17 19:23:02 +02:00
Federico Leoni	950a4dc998	HA Discovery: Oops! New DeviceName	2020-05-17 13:42:14 -03:00
Stephan Hadinger	1460f81490	Zigbee allow zero shortaddr	2020-05-17 18:33:42 +02:00
Theo Arends	80ad999a38	Merge pull request #8468 from s-hadinger/unishox_class ... Unishox code optimized	2020-05-17 18:24:00 +02:00
Stephan Hadinger	20b2257c8c	Unishox code optimized	2020-05-17 18:05:17 +02:00
Theo Arends	4e38cb7ba9	Allow empty DeviceName	2020-05-17 17:55:36 +02:00
Theo Arends	90e833238f	Allow no DeviceName	2020-05-17 17:38:28 +02:00
Theo Arends	d7f6c78ed9	Add command ``DeviceName`` ... Add command ``DeviceName`` defaults to FriendlyName1 and replaces FriendlyName1 in GUI	2020-05-17 17:10:17 +02:00
Theo Arends	1c441f9059	Free unused buffer	2020-05-17 12:04:55 +02:00
Theo Arends	63d15b68a6	Merge pull request #8458 from nagyrobi/patch-1 ... Add SetOption59 capability to MCP230XX	2020-05-16 17:52:10 +02:00
Theo Arends	80c8bf675c	Publish teleperiod data on command TelePeriod ... Publish teleperiod data on command ``TelePeriod`` (#2567)	2020-05-16 17:44:29 +02:00
nagyrobi	29177652dd	Add SetOption59 capability to MCP230XX	2020-05-16 17:30:43 +02:00
Theo Arends	c11952595e	Change QPC detection from 4 to 7 power interrupts ... Change Quick Power Cycle detection from 4 to 7 power interrupts (#4066)	2020-05-16 11:22:48 +02:00
Stephan Hadinger	d7bcfefa31	Size code reduction for XY calculations	2020-05-15 22:10:02 +02:00
gemu2015	1bbc77e6a7	sml update ... fix SML ESP32 uart handling add replace cmd vars to SML section add * option to SML WeBGUI scripter add optional ws2812 array offset scripter negative for next loops	2020-05-15 15:30:32 +02:00
Theo Arends	b9a4e7beda	Merge pull request #8448 from arijav/new_branch ... Thermostat: Small bugfix and PI autotune feature added (disabled by define, as experimental and un…	2020-05-15 12:22:19 +02:00
Javier Arigita	187bc9d23e	Added source reference for Autotune	2020-05-14 23:42:01 +02:00
Javier Arigita	b1fd316876	Further dev. of PI autotuning	2020-05-14 23:35:45 +02:00
Javier Arigita	ee25e6e637	Bugfix and autotune added (disabled by define, as experimental and untested)	2020-05-14 22:44:32 +02:00
Theo Arends	fd8b85ee4b	Merge branch 'development' into pre-release	2020-05-14 15:42:51 +02:00
Theo Arends	3fa1cbdd5a	Oops, wrong button	2020-05-14 15:42:15 +02:00
Theo Arends	eed6564405	Merge branch 'development' into pre-release	2020-05-14 15:35:30 +02:00
Theo Arends	fff26f6538	Fix button default state ... - Fix button default state - Bump version 8.3.0.1	2020-05-14 15:32:27 +02:00
Theo Arends	4e05975b6c	Sync with released 8.3.0	2020-05-14 12:40:48 +02:00
device111	88136168bb	Update tasmota_configurations.h	2020-05-13 12:52:20 +02:00
Theo Arends	b9dcca2f69	Merge branch 'development' into pre-release	2020-05-13 12:47:48 +02:00
Theo Arends	9b9b9e7d35	Merge pull request #8431 from malbinola/fix/wmtelejson ... WindMeter sensor: hide unsupported wind direction in tele messages	2020-05-12 23:06:32 +02:00
device111	47a8df84be	Support for VEML6075 and VEML 7700 ... Add support for VEML6075. -Shows UVA, UVB, UVIndex supported Commands are: | Command | Description | |----------------|------------------| |VEML6075power | Power up/down | |VEML6075dynamic | HD Mode | |VEML6075inttime | Integration Time | Add initial Support for VEML7700 (#8260) - the implementation based on Adafruit VEML7700 Libary. - Shows Illuminance and White Content of Light.	2020-05-12 21:24:44 +02:00
Stephan Hadinger	75591fb201	Zigbee optimized state machine and support for better ZCL Step commands	2020-05-12 21:13:46 +02:00
Matteo Albinola	632a8decec	Hide unsupported wind direction in tele messages	2020-05-12 21:12:16 +02:00
Federico Leoni	ae5970c107	HA Discovery : minor optimizations	2020-05-12 14:06:35 -03:00
Theo Arends	0b1ff7d62a	Merge branch 'development' into pre-release	2020-05-12 16:24:26 +02:00
Theo Arends	af32b3f5e5	Add ESP32 configuration webcam	2020-05-12 15:42:16 +02:00
Theo Arends	7078466e7c	Refactor webcam	2020-05-12 14:30:07 +02:00
gemu2015	d182817892	add psram to info page ESP32	2020-05-12 14:19:10 +02:00
gemu2015	a6aad08a5e	webcam bugfix and some cleanup	2020-05-12 08:14:58 +02:00
Stephan Hadinger	2ff5a1ccb6	Add Zigbee support for router and end-device mode	2020-05-11 21:16:17 +02:00
gemu2015	6d7f3843ce	scripter bug fix	2020-05-11 19:19:59 +02:00
Theo Arends	7e66cb0c34	Merge branch 'development' into pre-release	2020-05-11 16:51:23 +02:00
Theo Arends	4aa1c18d82	Revert uart buffer size increase ... Revert uart buffer size increase but visit uart buffer reads more often to solve possible uart buffer overrun caused by sleep	2020-05-11 16:45:22 +02:00
Theo Arends	ae7193d72c	Merge branch 'development' into pre-release	2020-05-11 16:00:23 +02:00
Theo Arends	001b6e4895	Fix Dew Point is null ... Fix Dew Point is null if either or both Temperature and/ot Humidity is null (#8411)	2020-05-11 15:38:59 +02:00
Theo Arends	125ee62ff3	Add Serial buffer overrun detection ... Add Serial buffer overrun detection and fix serial corruption by increasing uart serial buffer to 520	2020-05-11 15:27:29 +02:00
Javier Arigita	b31455c8eb	Minor correction	2020-05-10 23:34:53 +02:00
Javier Arigita	5062dc2c33	Optimizations, correction of comments and update of readme	2020-05-10 23:00:57 +02:00
Stephan Hadinger	e1def09a1b	Change Philips Hue emulation now exposes modelId and manufacturerId	2020-05-10 19:10:00 +02:00
Theo Arends	650aca898d	Merge pull request #8409 from gemu2015/scripter-fix ... Scripter fix	2020-05-10 18:26:52 +02:00
gemu2015	39a92c2767	Update xdrv_10_scripter.ino	2020-05-10 18:00:37 +02:00
Theo Arends	4d84a02b5f	Add /snapshot.jpg link to webcam	2020-05-10 17:52:28 +02:00
gemu2015	9b0aa51515	scripter fix create task	2020-05-10 17:51:22 +02:00
Stephan Hadinger	1b682d3564	Add rule length, truncates rules too long and add escape JSON	2020-05-10 15:24:10 +02:00
Theo Arends	878f3da25c	Merge branch 'development' into pre-release	2020-05-10 14:59:41 +02:00
Theo Arends	93a4700552	Cleanup default defines	2020-05-10 14:58:38 +02:00
Theo Arends	ec045445e6	Enable rule compression in my_user_config.h	2020-05-10 14:39:13 +02:00
Theo Arends	bdc0934cb8	Fix init of Energy Offset after power cycle ... Fix init of Energy Offset after power cycle (#8356)	2020-05-10 12:59:13 +02:00
Theo Arends	0404adf4a2	Merge branch 'development' into pre-release	2020-05-10 11:28:17 +02:00
Theo Arends	02f61a5259	Allow rule processing on single Status command ... Allow rule processing on single Status command only	2020-05-10 11:10:55 +02:00
Theo Arends	89b130b45a	Change root rule trigger ... Add rule trigger at root level like ``on loadavg<50 do power 2 endon`` after ``state`` command	2020-05-10 11:09:34 +02:00
Theo Arends	2dac2836d8	Merge pull request #8405 from s-hadinger/fix_batterypercentage ... Fix BatteryPercentage calculation	2020-05-10 10:42:37 +02:00
Stephan Hadinger	de40260f3e	Fix BatteryPercentage calculation	2020-05-10 10:18:23 +02:00
Theo Arends	cc2f7cbf5a	Oops remove debug message	2020-05-09 19:35:16 +02:00
Theo Arends	bf215b1b9d	Update root level triggers ... Add rule trigger ``#`` to trigger on any root value like ``on #loadavg<50 do power 2 endon`` after ``state`` command	2020-05-09 19:33:19 +02:00
Theo Arends	92c05faa8b	Add root level triggers as discussed on Discord ... - Add rule trigger ``root#`` to trigger on any root value like ``on root#loadavg<50 do power 2 endon`` after ``state`` command	2020-05-09 19:22:12 +02:00
Stephan Hadinger	64c71970cb	Fix clearing rules	2020-05-09 18:05:13 +02:00
Michael Ingraham	860db1b1d3	FIRMWARE_BASIC remnant	2020-05-09 10:41:56 -04:00
Adrian Scillato	1d42267ced	Merge pull request #8398 from bovirus/patch-1 ... Update Italian language	2020-05-08 17:59:05 -03:00
bovirus	d9c9eeca78	Update Italian language	2020-05-08 19:45:39 +02:00
Stephan Hadinger	a2b05399a3	Add automatic compression of Rules to achieve ~60% compression, added ``SetOption93 1`` to control caching of rules	2020-05-08 19:33:20 +02:00
Stephan Hadinger	87a1cd0ea0	Change PWM updated to the latest version of Arduino PR #7231	2020-05-08 17:52:24 +02:00
Theo Arends	f66a0ee561	Add Webcam commands	2020-05-08 17:17:09 +02:00
Theo Arends	0572644c7f	Change PWM Frequencies ... - Change default PWM Frequency to 977 Hz from 880 Hz - Change minimum PWM Frequency from 100 Hz to 40 Hz	2020-05-08 16:06:02 +02:00
Theo Arends	8c153c9ce7	Merge pull request #8394 from s-hadinger/pwmfreq_min_40 ... Lower minimum PWMFrequency to 40Hz	2020-05-08 15:57:40 +02:00
Stephan Hadinger	b53dee396e	Lower minimum PWMFrequency to 40Hz	2020-05-08 15:42:44 +02:00
Theo Arends	33acbd1a8b	Fix Domoticz range check	2020-05-08 12:04:52 +02:00
Theo Arends	82ccd7ed37	Fix compilation error	2020-05-08 11:17:18 +02:00
Theo Arends	d70ce6a767	Merge pull request #8389 from Theosakamg/language_unit ... Language Unit Translate	2020-05-08 11:03:36 +02:00
Mickael Gaillard	b6165d5a18	Add Translate Fahrenheit ... Signed-off-by: Mickael Gaillard <mick.gaillard@gmail.com>	2020-05-08 00:53:13 +02:00
Mickael Gaillard	2ddfb2da07	Add extra translate ... Signed-off-by: Mickael Gaillard <mick.gaillard@gmail.com>	2020-05-08 00:34:25 +02:00
znanev	1387866397	Update bg_BG.h	2020-05-07 22:57:23 +01:00
Stephan Hadinger	9dfc8f8785	Shrink the Sunrise/Sunset code	2020-05-07 19:48:43 +02:00
Theo Arends	b00463900b	Merge branch 'development' into pre-release	2020-05-07 18:14:34 +02:00
Theo Arends	2a6de09396	Change ESP32 GUI GPIO index display	2020-05-07 18:10:54 +02:00
Theo Arends	5bbcc4f969	Merge pull request #8383 from effelle/development ... Hass Discovery: fix missing trigger for toggle	2020-05-07 18:03:13 +02:00
Federico Leoni	4e2edb83d2	Hass Discovery: fix wrong trigger state	2020-05-07 12:58:39 -03:00
Theo Arends	19d8592978	Merge branch 'development' into new_branch	2020-05-07 17:02:22 +02:00
Theo Arends	247bd0b44e	Merge branch 'development' of https://github.com/arendst/Tasmota into development	2020-05-07 16:54:09 +02:00
Theo Arends	2fbad7b389	Change webcam driver number ... Change webcam driver number as ESP32 driver only starting now from 81.	2020-05-07 16:53:56 +02:00
Theo Arends	0ffd28bf21	Merge pull request #8375 from gemu2015/scripter-tasks ... Scripter tasks	2020-05-07 16:50:41 +02:00
gemu2015	eb758d49d3	scripter tasks	2020-05-07 16:16:46 +02:00
Theo Arends	0ca5bf4e41	Merge pull request #8243 from ctc/development ... Restore tilt of venetian blinds after movement	2020-05-07 16:12:50 +02:00
Theo Arends	d78ca09c30	Integrate OpenTherm and WindMeter	2020-05-07 16:03:27 +02:00
Theo Arends	cb1b7739b6	Merge branch 'development' into new-windmeter-sensor	2020-05-07 14:58:23 +02:00
Theo Arends	6da16b5665	Update my_user_config.h	2020-05-07 14:43:55 +02:00
Yury Sannikov	cc1fffe7c4	fix ESP32 build	2020-05-07 12:43:47 +03:00
Yury Sannikov	9e6a809ba2	adapt to the latest development branch changes	2020-05-07 11:58:17 +03:00
Yury Sannikov	049ddad17b	update languages	2020-05-07 11:54:29 +03:00
Yury Sannikov	af98b26ef1	Porting OT implementation from my personal repo	2020-05-07 11:40:03 +03:00
Yury Sannikov	1332325a5b	Adding Igor's libraries with his permission	2020-05-07 11:39:08 +03:00
Theo Arends	88dbc8f120	Merge pull request #8370 from effelle/development ... New HAss Discovery (4/4): RELAYS/LIGHTS	2020-05-07 09:20:26 +02:00
Theo Arends	171c584529	Merge pull request #8369 from Theosakamg/integration_core ... APDS-9960 - Custom configuration tntegration on core	2020-05-07 09:19:48 +02:00
Matteo Albinola	a3455f235b	Merge branch 'development' into new-windmeter-sensor ... # Conflicts: # tasmota/language/bg_BG.h # tasmota/language/cs_CZ.h # tasmota/language/de_DE.h # tasmota/language/el_GR.h # tasmota/language/en_GB.h # tasmota/language/es_ES.h # tasmota/language/fr_FR.h # tasmota/language/he_HE.h # tasmota/language/hu_HU.h # tasmota/language/it_IT.h # tasmota/language/ko_KO.h # tasmota/language/nl_NL.h # tasmota/language/pl_PL.h # tasmota/language/pt_BR.h # tasmota/language/pt_PT.h # tasmota/language/ro_RO.h # tasmota/language/ru_RU.h # tasmota/language/sk_SK.h # tasmota/language/sv_SE.h # tasmota/language/tr_TR.h # tasmota/language/uk_UA.h # tasmota/language/zh_CN.h # tasmota/language/zh_TW.h	2020-05-06 21:33:07 +02:00
Mickael Gaillard	d54dcec303	Custom configuration tntegration on core ... Signed-off-by: Mickael Gaillard <mick.gaillard@gmail.com>	2020-05-06 21:30:36 +02:00
gemu2015	1c44481b41	scripter fix ... add pheap and core to scripter allow coexistence of scripter with webcam cmd	2020-05-06 20:37:05 +02:00
Federico Leoni	1e8277eccd	New HAss Discovery (4/4): RELAYS/LIGHTS	2020-05-06 14:52:08 -03:00
Stephan Hadinger	f9d775089e	Reduce code size of SettingsDefaultSet2()	2020-05-06 19:21:04 +02:00
Theo Arends	87f89f0a7d	Change max number of supported PCF8574 to four ... Change max number of supported PCF8574 to four (#8355)	2020-05-06 17:44:44 +02:00
Theo Arends	73a153f265	Merge pull request #8364 from bovirus/patch-1 ... Update Italian language	2020-05-06 17:28:22 +02:00
Theo Arends	0d19fd4654	Fix unwanted Domoticz messages ... Fix unwanted Domoticz messages (#8355)	2020-05-06 17:23:14 +02:00
bovirus	80877b25ba	Update Italian language	2020-05-06 17:20:29 +02:00
Theo Arends	895b13ba19	Merge branch 'development' into pre-release	2020-05-06 10:36:17 +02:00
Theo Arends	4abf498041	Merge pull request #8357 from Theosakamg/default_mode ... APDS-9960 - Add default startup mode	2020-05-06 10:34:02 +02:00
Stephan Hadinger	646f76e459	Minor size optimizations	2020-05-06 08:56:09 +02:00
Javier Arigita	3e8a82ebdf	Small comment changes	2020-05-05 23:56:44 +02:00
Mickael Gaillard	18a0552aa8	Add startup mode ... Signed-off-by: Mickael Gaillard <mick.gaillard@gmail.com>	2020-05-05 22:18:57 +02:00
Javier Arigita	4b2d4e3f79	Code optimizations	2020-05-05 21:11:32 +02:00
Javier Arigita	5bdf430512	Added cooling functionality	2020-05-05 20:40:09 +02:00
Theo Arends	93ac75a5aa	Prep ESP32 Webcam for user template	2020-05-05 18:36:12 +02:00
Theo Arends	50614a18b5	Rename language files to fix compilation error	2020-05-05 17:09:48 +02:00
Theo Arends	139d32a86d	Optimize ESP32 webserver	2020-05-05 15:53:16 +02:00
Theo Arends	e2da3e432e	Merge branch 'development' into pre-release	2020-05-05 14:31:43 +02:00
Theo Arends	89e1475b36	Relax webcam setup time	2020-05-05 14:30:07 +02:00
Theo Arends	0f11b28a94	Merge pull request #8352 from gemu2015/webcam-update ... Webcam update	2020-05-05 11:45:32 +02:00
gemu2015	9d3dbed411	some formatting	2020-05-05 11:40:50 +02:00
gemu2015	489865b82b	Update xdrv_39_webcam.ino	2020-05-05 09:39:35 +02:00
gemu2015	db15571336	add face detect	2020-05-05 09:36:43 +02:00
Matteo Albinola	097d51ea72	Merge branch 'development' into new-windmeter-sensor ... # Conflicts: # tasmota/language/bg-BG.h # tasmota/language/cs-CZ.h # tasmota/language/de-DE.h # tasmota/language/el-GR.h # tasmota/language/en-GB.h # tasmota/language/es-ES.h # tasmota/language/fr-FR.h # tasmota/language/he-HE.h # tasmota/language/hu-HU.h # tasmota/language/it-IT.h # tasmota/language/ko-KO.h # tasmota/language/nl-NL.h # tasmota/language/pl-PL.h # tasmota/language/pt-BR.h # tasmota/language/pt-PT.h # tasmota/language/ro-RO.h # tasmota/language/ru-RU.h # tasmota/language/sk-SK.h # tasmota/language/sv-SE.h # tasmota/language/tr-TR.h # tasmota/language/uk-UA.h # tasmota/language/zh-CN.h # tasmota/language/zh-TW.h	2020-05-05 09:07:03 +02:00
Mickael	48f4ee0436	Add Use for Proximity and Color ... Signed-off-by: Mickael Gaillard <mick.gaillard@gmail.com>	2020-05-04 23:50:26 +02:00
Stephan Hadinger	b07edd1d74	Move constants in PMEM	2020-05-04 20:00:05 +02:00
Theo Arends	ce4520137a	Merge pull request #8339 from ascillato/patch-1 ... KNX: Fix for New Internal Pin Handling on ESP32	2020-05-04 17:49:53 +02:00
Theo Arends	8bdd46a965	Start ESP32 webcam on GUI load	2020-05-04 17:13:14 +02:00
Adrian Scillato	ecdaed50d6	KNX: Fix for New Internal Pin Handling on ESP32	2020-05-04 11:07:43 -03:00
Theo Arends	c66f14baae	Fix ESP32 compilation	2020-05-04 14:33:23 +02:00
Theo Arends	8f9bc1e5f7	Cleanup ESP32 webcam	2020-05-04 12:48:42 +02:00
Theo Arends	23a9948d29	Fix ESP32 compilation	2020-05-04 11:07:52 +02:00
gemu2015	0f5ffe5473	replace serial print	2020-05-04 06:54:24 +02:00
gemu2015	c2b295984b	fix webcam size parameter	2020-05-04 06:25:13 +02:00
Theo Arends	d410420110	Tasmotify ESP32 webcam	2020-05-03 18:37:12 +02:00
Javier Arigita	6f5c35ff33	Corrections to manual state and extension of debug features for 4 output system	2020-05-03 15:11:19 +02:00
Theo Arends	5c744b573e	Fix OTA corruption on large file uploads usinf -minimal	2020-05-03 11:42:10 +02:00
Stephan Hadinger	4b22f60e51	Change PWM updated to latest Arduino Core #7213	2020-05-03 10:39:38 +02:00
Javier Arigita	516b11f766	Comment fix	2020-05-02 22:35:53 +02:00
Javier Arigita	6766039cc7	Fix merge	2020-05-02 22:34:08 +02:00
Javier Arigita	d6008321cc	Preliminary implementatino of multi-controller, in-depth testing and optimizations pending	2020-05-02 22:33:29 +02:00
Javier Arigita	920c7ffadc	Merge corrected	2020-05-02 20:32:37 +02:00
Javier Arigita	b6954f5f0b	Diagnostic feature added	2020-05-02 20:31:20 +02:00
Theo Arends	ec1913346c	Fix ESP32 GPIO selection if Counters are disabled	2020-05-02 17:53:57 +02:00
Theo Arends	203c799dc5	Increase TasmotaSlave Serial Timeout ... Increase TasmotaSlave Serial Timeout (#8316)	2020-05-02 17:25:58 +02:00
Theo Arends	e5f2773213	Fix compile error when USE_LIGHT is disabled	2020-05-02 17:13:50 +02:00
gemu2015	72ee040948	webcam test whitout script ... scripter local ip text var	2020-05-02 16:44:44 +02:00
Matteo Albinola	0153601dc2	Support new pin handling changes	2020-05-02 15:22:37 +02:00
Matteo Albinola	691e1e9653	Merge branch 'development' into new-windmeter-sensor	2020-05-02 15:10:56 +02:00
gemu2015	76c7966069	update language	2020-05-02 08:19:54 +02:00
gemu2015	a237297e8a	esp32 webcam support	2020-05-02 08:10:23 +02:00
Javier Arigita	20f3d8ddef	Implementation of Fahrenheit temperatures as option	2020-05-01 21:30:08 +02:00
Javier Arigita	e23803846f	Implementation of Fahrenheit temperatures as option	2020-05-01 21:28:58 +02:00
Theo Arends	99178c2f5d	Merge pull request #8315 from gemu2015/esp32-pwm ... esp32 initial pwm support	2020-05-01 18:04:43 +02:00
Theo Arends	5df4b7b391	Fix ESP32 template upload	2020-05-01 17:52:01 +02:00
gemu2015	bf29904b7a	esp32 initial pwm support	2020-05-01 17:38:40 +02:00
Theo Arends	892be892fa	Remove gpio to pin support	2020-05-01 17:37:56 +02:00
Theo Arends	5d18ad1c74	Add experimental basic support for ESP32 ... - Add experimental basic support for Tasmota on ESP32 based on work by Jörg Schüler-Maroldt - Bump version to 8.2.0.6 - This ESP32 upgrade breaks current ESP32 templates	2020-05-01 17:30:09 +02:00
Theo Arends	7177c7d8e0	Change ESP32 pin allocation part 4	2020-05-01 16:47:41 +02:00
Theo Arends	5b1df71de6	Fix ESP32 pin allocation part 3 regression	2020-05-01 11:48:12 +02:00
Theo Arends	c0a05e9586	Change ESP32 pin allocation part 3	2020-04-30 18:47:34 +02:00
Javier Arigita	98dc4d8c4d	Support added for DS18B20 temperature sensor and reduction of variables in heating structure	2020-04-29 21:42:20 +02:00
device111	a83ea5290e	Fix http message time	2020-04-29 20:33:46 +02:00
Theo Arends	ef61668037	Change ESP32 pin allocation part 2	2020-04-29 17:44:03 +02:00
Theo Arends	7dc7b631d4	Fix ESP32 settings size ... Fix ESP32 settings size as regression from yesterday	2020-04-29 14:18:38 +02:00
Theo Arends	d805803daa	Change pin array names ... Change pin array names to block unwanted use of direct access	2020-04-29 14:01:02 +02:00
Javier Arigita	d7f81899a7	Bugfix manual to auto corrected, reduction of floats and rampup ctr. improvement	2020-04-29 13:46:22 +02:00
Theo Arends	c24de18278	Change ESP32 pin allocation part 1	2020-04-28 18:27:07 +02:00
Matteo Albinola	8975bfb310	Uncomment feature lines	2020-04-28 18:09:10 +02:00
Theo Arends	ade7b4b96e	Merge branch 'development' into pre-release	2020-04-28 16:05:06 +02:00
Theo Arends	60e7a73b60	Switch from GPIO array to Pin array	2020-04-28 14:42:47 +02:00
Matteo Albinola	e23b43f979	Add option for triggering a tele update under conditions	2020-04-28 14:02:05 +02:00
Theo Arends	4536746d03	Update Changelog and Release notes	2020-04-28 11:09:56 +02:00
Theo Arends	53991beb4b	Merge pull request #8294 from kugelkopf123/update_adc_2 ... Update xsns_02_analog.ino	2020-04-28 09:23:37 +02:00
Paul C Diem	966d3522ad	Rework DGR channel update	2020-04-28 00:18:40 -05:00
Paul C Diem	b6e62bf715	Only advance to next palette color when fade is down	2020-04-27 22:26:32 -05:00
kugelkopf123	4cd21644d6	Update xsns_02_analog.ino	2020-04-27 20:44:26 +02:00
Theo Arends	3fef91d6ca	Change pin handling part 6	2020-04-27 17:28:05 +02:00
Theo Arends	ae4ec4325d	Change pin handling part 5	2020-04-27 17:16:52 +02:00
Theo Arends	1dda2ac663	Fix pin handling part 4/4	2020-04-27 16:55:56 +02:00
Theo Arends	86f801c349	Change pin handling part 4/4	2020-04-27 16:47:29 +02:00
Theo Arends	c939077514	Change pin handling part 3	2020-04-27 12:54:07 +02:00
Theo Arends	24280bcdea	Change pin handling part 2	2020-04-27 11:54:23 +02:00
Theo Arends	5d9be9a4d0	Fix pin handling part 1	2020-04-27 10:35:38 +02:00
Matteo Albinola	bdb5d92d85	Add variable for tele updates	2020-04-27 09:38:39 +02:00
Theo Arends	c54dc6cdb5	Merge pull request #8288 from Theosakamg/improve_gesture ... APDS-9960 - Reduce footprint	2020-04-27 09:21:05 +02:00
gemu2015	357e8d71b7	fix sml transmit timer	2020-04-27 07:20:17 +02:00
Adrian Scillato	a417df1760	Fix Humidity conversion on HDC1080 ... https://github.com/arendst/Tasmota/issues/8194#issuecomment-615749619	2020-04-26 20:49:46 -03:00
Mickael Gaillard	0dc154c8e0	Reduce footprint ... Signed-off-by: Mickael Gaillard <mick.gaillard@gmail.com>	2020-04-26 19:51:20 +02:00
Mickael Gaillard	f8fabfe035	Refactor code ... Signed-off-by: Mickael Gaillard <mick.gaillard@gmail.com>	2020-04-26 19:44:25 +02:00
Matteo Albinola	dcc4623791	Merge branch 'development' into new-windmeter-sensor	2020-04-26 19:39:14 +02:00
Mickael Gaillard	0464bd364d	use builtin function for readBuffer ... Signed-off-by: Mickael Gaillard <mick.gaillard@gmail.com>	2020-04-26 19:35:11 +02:00
Matteo Albinola	b9aa6fe19d	Add configuration persistence fixing variable alignment problem	2020-04-26 19:21:10 +02:00
Javier Arigita	c71b4d34ea	Correct merge	2020-04-26 18:04:12 +02:00
Javier Arigita	ba3457ed96	Correct merge	2020-04-26 18:00:19 +02:00
Javier Arigita	05a9fe5c7d	Correct merge	2020-04-26 17:59:36 +02:00
Theo Arends	c9149b53c5	Change pin handling part 1	2020-04-26 17:33:27 +02:00
Javier Arigita	ec94424661	Correct merge	2020-04-26 17:26:45 +02:00
Javier Arigita	9e0aa7d951	Correct merge	2020-04-26 17:23:43 +02:00
gemu2015	b252a0c122	fix scripter RulesProcessEvent	2020-04-26 12:01:13 +02:00
Theo Arends	cc19cc5773	Merge pull request #8257 from dermm/development ... Add Option to activate PWM CT mode without select module 48	2020-04-26 10:49:01 +02:00
Stephan Hadinger	1404b6f536	Change IRremoteESP8266 library updated to v2.7.6	2020-04-26 09:59:49 +02:00
Matteo Albinola	1b7ca00714	Merge branch 'development' into new-windmeter-sensor	2020-04-26 09:50:46 +02:00
Matteo Albinola	24709b9f6d	Add windmeter sensor	2020-04-26 09:43:52 +02:00
Theo Arends	07c033e5d4	Merge pull request #8280 from pcdiem/device-groups-11 ... Add DGR light sequence support	2020-04-26 09:03:33 +02:00
Theo Arends	188eee83d9	Merge pull request #8279 from device111/development ... Add translation for AS3935	2020-04-26 09:01:15 +02:00
Javier Arigita	83cdd2f26f	Correction overflow protection	2020-04-26 08:48:03 +02:00
Javier Arigita	c577a955b0	Reduction of floats and implementation of overflow protection	2020-04-26 08:36:15 +02:00
Paul C Diem	493a124783	Add DGR light sequence support	2020-04-25 17:49:34 -05:00
device111	7935e623a0	Add translation for AS3935	2020-04-26 00:43:50 +02:00
Mickael Gaillard	3a8bb77c9b	Enable Gesture by default (fix bad remove) ... Signed-off-by: Mickael Gaillard <mick.gaillard@gmail.com>	2020-04-26 00:05:54 +02:00
device111	5ab1e66c6a	Add Text based Error Log Message for MQTT Client	2020-04-25 23:17:25 +02:00
Mickael Gaillard	c5caa0fbda	Optional for gesture (reduce size) ... Signed-off-by: Mickael Gaillard <mick.gaillard@gmail.com>	2020-04-25 21:15:35 +02:00
Mickael Gaillard	2ca2fc7cac	Add web server gesture display ... Signed-off-by: Mickael Gaillard <mick.gaillard@gmail.com>	2020-04-25 19:43:20 +02:00
Theo Arends	76f9ebfb72	Attempt to fix ESP32 gui page load error ... Attempt to fix ESP32 gui Configure Template page load error by switching large content from Ajax loading parameters to included parameters.	2020-04-25 15:34:18 +02:00
Theo Arends	123b90d665	Attempt to fix ESP32 gui page load error ... Attempt to fix ESP32 gui Configure Module page load error by switching from Ajax loading parameters to included parameters.	2020-04-25 13:30:00 +02:00
Theo Arends	7372f6317d	Implement ARRAY_SIZE macro (part 2)	2020-04-25 11:38:11 +02:00
Theo Arends	104e3c4838	Implement ARRAY_SIZE macro	2020-04-25 11:37:36 +02:00
Theo Arends	14040f601c	Breaking Change Device Groups multicast address and port ... - Breaking Change Device Groups multicast address and port (#8270) - Version bump 8.2.0.5	2020-04-25 11:20:48 +02:00
Theo Arends	c0bc7abeee	Merge pull request #8272 from joerg555/development ... Nimble no warnig, optimise CommandHandler()	2020-04-25 09:36:29 +02:00
Theo Arends	209c8f4eb7	Merge pull request #8270 from pcdiem/device-groups-10 ... Use defined mcast addr for device groups instead of sharing emuation	2020-04-25 09:35:22 +02:00
Jörg Schüler-Maroldt	4c0a85ba0f	CommandHandler() optimize and maybe security fix	2020-04-25 00:55:39 +02:00
Javier Arigita	12a3aacb98	Code activated by debug define corrected	2020-04-24 23:30:18 +02:00
Javier Arigita	65c0a92be7	Added functions for arming/disarming thermostat from web timers	2020-04-24 23:18:17 +02:00
Mickael Gaillard	3fbd454600	Merge branch 'development' into gesture_structure	2020-04-24 23:02:40 +02:00
Mickael Gaillard	fae30ee5e6	Structure Gesture Delta ... Rename TAG logger	2020-04-24 22:48:47 +02:00
Theo Arends	9ed8e7c254	Fix internal array size checks	2020-04-24 17:39:26 +02:00
Paul C Diem	8d2c0b1716	Fix DGR conditional	2020-04-24 10:28:32 -05:00
Paul C Diem	edd330272b	For DevGroupSend, ignore out share mask and always process locallly	2020-04-24 09:50:29 -05:00
Paul C Diem	81a874ec72	Use defined mcast addr for device groups instead of sharing emuation's, Code size reductions	2020-04-24 09:12:43 -05:00
Theo Arends	5f75a4c354	Fix future compile error ;-)	2020-04-24 15:50:27 +02:00
Theo Arends	56e756602e	Merge pull request #8265 from Theosakamg/upstream_sparkfun ... APDS-9960 - Resync with sparkfun	2020-04-24 11:34:49 +02:00
Mickael Gaillard	bb0d4387ff	Resync at commit 258bea2da ... Signed-off-by: Mickael Gaillard <mick.gaillard@gmail.com>	2020-04-23 23:04:25 +02:00
Javier Arigita	6915346048	Fix merge	2020-04-23 22:51:13 +02:00
Javier Arigita	6225298353	Fix merge	2020-04-23 22:50:51 +02:00
Javier Arigita	bbb4fbd24b	Fix merge	2020-04-23 22:49:16 +02:00
Javier Arigita	7c336a1105	Fix merge	2020-04-23 22:48:44 +02:00
Javier Arigita	88e0af98db	Fix merge	2020-04-23 22:47:58 +02:00
Javier Arigita	7ea961953f	Fix merge	2020-04-23 22:47:18 +02:00
Javier Arigita	29ec129a05	Fix merge	2020-04-23 22:44:06 +02:00
Javier Arigita	f325a436ba	Fix merge	2020-04-23 22:43:20 +02:00
Javier Arigita	ab04f416ad	Fix merge	2020-04-23 22:41:20 +02:00
Javier Arigita	058d23fa00	Heating structure aligned and unneeded defines removed	2020-04-23 22:39:28 +02:00
Mickael Gaillard	6d8fab10f3	Add Debug Chip ID And Fifo ... Signed-off-by: Mickael Gaillard <mick.gaillard@gmail.com>	2020-04-23 21:56:23 +02:00
dermm	809a377154	Add Option to Activate PWM CT mode without select module 48 ... Hello, I would like to share with you my extension of the code. I have some new lamps that have 2 PWM channels that are not classically wired. The first one is for brightness and the other channel is for color temperature. Tasmota has already integrated the possibility to switch between CWWW and CTBRI. I only built the possibility to set it up manually. greetings, Jens PS: This is my first commit. If I did something wrong, please report it.	2020-04-22 19:43:57 +02:00
Theo Arends	717f3b9d47	Fix compile error (#8256) ... Fix compile error (#8256)	2020-04-22 17:48:42 +02:00
Theo Arends	1af24ddcf5	Update changelog	2020-04-22 16:36:27 +02:00
Theo Arends	be1fb3756c	Change ESP32 freeHeap to MaxAllocHeap	2020-04-22 16:07:52 +02:00
Stephan Hadinger	e06425b57f	Change default PWM Frequency to 223 Hz instead of 880 Hz for less interrupt pressure	2020-04-22 15:15:42 +02:00
Theo Arends	f72be91f98	Merge pull request #8246 from s-hadinger/pwm_7231 ... Change PWM implementation to Arduino #7231	2020-04-22 15:13:26 +02:00
Theo Arends	f08ce9aa5b	Merge pull request #8221 from Theosakamg/clean_code ... Format code with cpplint	2020-04-22 15:01:35 +02:00
Stephan Hadinger	d1beb59332	Fix compilation	2020-04-22 15:00:38 +02:00
Theo Arends	9ae0300a0d	Fix ESP32 compile errors	2020-04-22 14:47:59 +02:00
Theo Arends	ac15179e21	Merge pull request #8252 from Bettman66/development ... Support for setting the time in the Tuya MCU	2020-04-22 14:17:14 +02:00
Walter Zengel	8abe45f7a2	USE_TUYA_TIME deactivated by default	2020-04-22 13:52:06 +02:00
Stephan Hadinger	a948a8f4b3	Fix wrong setting of free_range after reset or restart (#8120)	2020-04-22 12:13:53 +02:00
Walter Zengel	550f079f6a	Support for setting the time in the Tuya MCU ... Switch on with USE_TUYA_TIME	2020-04-22 11:07:45 +02:00
Paul C Diem	50cdede658	Fix pwm_dimmer compiler error w/o USE_DEVICE_GROUPS, Slight code cleanup	2020-04-21 21:56:26 -05:00
Paul C Diem	0f4b85ee51	Add DGR Command item and message logging, Restructure to reduce new code size	2020-04-21 16:33:07 -05:00
Stephan Hadinger	32dfa7856b	Change PWM implementation to Arduino #7231	2020-04-21 18:38:43 +02:00
Ingo Flaschberger	d9ff42f5b7	Add ShutterSetOpen command	2020-04-21 16:20:20 +02:00
Ingo Flaschberger	4518abaf32	Update Position / Trigger only active shutter	2020-04-21 16:19:42 +02:00
Ingo Flaschberger	2b1a9845d7	Fix: update position for all shutter types	2020-04-21 16:18:18 +02:00
Theo Arends	0196c70a40	Fix initial config version	2020-04-21 15:53:45 +02:00
Theo Arends	4b816864a1	Merge pull request #8242 from effelle/development ... HA Discovery	2020-04-21 15:18:21 +02:00
Federico Leoni	3e47b6fe19	HA Discovery	2020-04-21 09:54:17 -03:00
Theo Arends	1065381a79	Fix MI_ESP32 MQTT voltage calculation	2020-04-21 11:46:41 +02:00
Theo Arends	b9f8d0b104	Restrict use of HM10 driver to ESP8266 only	2020-04-21 11:06:30 +02:00
Theo Arends	47ad6db686	Merge pull request #8240 from Staars/BLE ... Mijia-BLE-Bridge for ESP32	2020-04-21 10:18:26 +02:00
Theo Arends	965c44c0a9	Fix shortcut SO response	2020-04-21 10:03:34 +02:00
Staars	e39f62204b	xsns_62_MI_ESP32.ino - initial commit	2020-04-21 09:58:33 +02:00
Theo Arends	6c5e9a89c4	Add command ``SO`` as shortcut for command ``SetOption``	2020-04-21 09:48:27 +02:00
Theo Arends	b172e9bde2	Fix Shutter multi-press command	2020-04-21 09:41:35 +02:00
Javier Arigita	f24c8eeda5	Corrected merge issue	2020-04-21 00:16:20 +02:00
Javier Arigita	4c8c75c1d1	Comments aligned in the proper way	2020-04-21 00:14:39 +02:00
Javier Arigita	262ab63f6f	Removed of all driver name	2020-04-20 22:51:51 +02:00
Javier Arigita	4cac6deb3d	Command defines moved from i18n.h into the driver, driver name changed to thermostat	2020-04-20 22:50:53 +02:00
Javier Arigita	c5b7109704	Disable debug by default	2020-04-20 21:33:32 +02:00
Javier Arigita	e96eb3a62a	Heating plan removed since it can be implemented via timers/rules	2020-04-20 21:29:46 +02:00
Theo Arends	f594c72609	Fix some compile errors	2020-04-20 20:00:49 +02:00
Theo Arends	c977069df5	Merge branch 'development' into pre-release	2020-04-20 18:31:20 +02:00
Theo Arends	0b08c72247	Add command ``SetOption73 1`` for button decoupling ... Add command ``SetOption73 1`` for button decoupling and send multi-press and hold MQTT messages by Federico Leoni (#8235)	2020-04-20 17:47:40 +02:00
Federico Leoni	9958c5f0f1	BUTTON V2	2020-04-20 11:15:45 -03:00
Theo Arends	7be570d060	Update ESP32 GPIO labelling	2020-04-20 10:40:54 +02:00
Staars	06b91c4a37	revert serial related ESP32-changes, not needed anymore	2020-04-19 21:51:56 +02:00
Theo Arends	19796a7f97	Refactor ESP32 code	2020-04-19 16:58:13 +02:00
Theo Arends	d384367f19	Merge pull request #8229 from pcdiem/light-color ... Fix fixed color bug introduced by palette code	2020-04-19 15:42:54 +02:00
Theo Arends	c37dde93c2	Add ESP32 QuickPowerCycle control	2020-04-19 15:36:04 +02:00
Paul C Diem	f4ea26749c	Fix fixed color bug introduced by pallete code	2020-04-19 08:19:05 -05:00
Mickael Gaillard	94ca074b59	Format code with cpplint ... Signed-off-by: Mickael Gaillard <mickael.gaillard@tactfactory.com>	2020-04-19 14:51:37 +02:00
Theo Arends	eab612871c	Fix ESP32 bootloop control using RTC memory	2020-04-19 14:18:12 +02:00
Theo Arends	0f3619238f	Add ESP32 bootloop control	2020-04-19 13:08:04 +02:00
Theo Arends	6ec18c3c01	Merge pull request #8225 from pcdiem/pwm-dimmer-10 ... Fix remote device group update index and power state, Ignore power bu…	2020-04-19 08:54:08 +02:00
Javier Arigita	4485184a4e	Fix merge	2020-04-19 08:09:37 +02:00
Paul C Diem	2c83dc7765	Fix remote device group update index and power state, Ignore power buttonhold after tap	2020-04-19 00:36:26 -05:00
Paul C Diem	a3e8c9587a	Merge branch 'development' of https://github.com/arendst/Tasmota into device-groups-8	2020-04-18 23:51:04 -05:00
Paul C Diem	b116f07003	Send Event command to device group	2020-04-18 23:42:51 -05:00
Paul C Diem	f040b90583	Add DGR Event item, Rework item parsing	2020-04-18 22:37:05 -05:00
Javier Arigita	95a4d6cd5d	Adding debug features, disable by default	2020-04-18 21:07:08 +02:00
Javier Arigita	b47785191c	Adding debug features, disable by default	2020-04-18 21:05:35 +02:00
Javier Arigita	1deb92a2b1	Fix kCommandSource adding heating source	2020-04-18 20:53:28 +02:00
Javier Arigita	a979136161	Fix kCommandSource adding heating source	2020-04-18 20:51:03 +02:00
Javier Arigita	5122ea6c10	Fix kCommandSource adding heating source	2020-04-18 20:49:38 +02:00
Theo Arends	e1d7416a36	Add features to ESP32 ... - Decided to support ONLY flash mode DOUT (no software change but allows for RX1/TX1) - Add GPIO9 (RX1) and GPIO10 (TX1) for hardware serial support - Add above two GPIOs to template - Moved basic ADC0 support from GPIO36 to GPIO33	2020-04-18 18:10:41 +02:00
Theo Arends	48dd608da9	Fix HTU21 sensor loss after ESP32 restart	2020-04-18 17:04:00 +02:00
Theo Arends	684b7dc3a4	Update ESP32 optional brownout disable	2020-04-18 16:34:29 +02:00
Theo Arends	9d838c001c	Fix possible powerretain failure ... Fix possible powerretain failure (#8219)	2020-04-18 16:30:36 +02:00
Theo Arends	7dc0b153c4	Merge branch 'development' into development	2020-04-18 15:17:39 +02:00
Javier Arigita	f937504dd5	Correction of second counter and integration into Bitfield to save 1 byte	2020-04-18 10:19:11 +02:00
bovirus	e0753eeead	Update Italian tarnslation ... Align Italian enw string to the scheme of translation of previous strings (see up/down)	2020-04-18 09:59:25 +02:00
Theo Arends	7594108f7c	Merge pull request #8213 from effelle/development ... Inverted Buttons V2	2020-04-18 09:57:02 +02:00
Javier Arigita	ade012a2c7	Reduction of types	2020-04-18 09:44:15 +02:00
Federico Leoni	d69b8a158d	Inverted buttons V2	2020-04-17 19:23:41 -03:00
Javier Arigita	b3094aa50e	New driver created for heating control. I have created initially this as a LUA script running in Domoticz on a Raspberry Pi to control floor heating valves using Qubino relays. I have ported this to a Tasmota driver embedding the functionality in the relays. This driver has been successfully tested with a shelly 1PM. The controller offers 3 controlling strategies (Hybrid, Rampup and PI) as well as time planning (3 diff. temp. each weekday).	2020-04-17 22:52:06 +02:00
Javier Arigita	ba0a2ff2eb	Corrections to reduce settings	2020-04-17 20:24:12 +02:00
Theo Arends	8ada812218	Add ESP32 optional brownout disable ... Add ESP32 brownout disable for weak onboard LDO's - eventually you'll need to change the LDO to a better one.	2020-04-17 20:14:36 +02:00
Stephan Hadinger	3f9fdc09ce	Remove warning/errors when compiling Zigbee for ESP32	2020-04-17 20:14:36 +02:00
Stephan Hadinger	36c9a44512	Fix Zigbee DimmerUp/DimmerDown malformed	2020-04-17 20:14:35 +02:00
Theo Arends	ee98151834	Provide ESP32 base module support	2020-04-17 20:14:35 +02:00
Theo Arends	49652598de	Prep ESP32 template	2020-04-17 20:14:35 +02:00
Javier Arigita	bba829883b	Update	2020-04-17 20:14:35 +02:00
Javier Arigita	e347c26eff	Revert "Update i18n.h" ... This reverts commit 56788a339f0cd7b013182eaa815b2d32aeabd3bd.	2020-04-17 20:14:35 +02:00
Javier Arigita	72ca178154	Revert "Update settings.ino" ... This reverts commit 431ad4256545abd953589c1455a90164dcde5b8a.	2020-04-17 20:14:35 +02:00
Theo Arends	b70ca01231	Add ESP32 optional brownout disable ... Add ESP32 brownout disable for weak onboard LDO's - eventually you'll need to change the LDO to a better one.	2020-04-17 18:27:31 +02:00
Theo Arends	c6ad8ddf89	Merge pull request #8210 from s-hadinger/zigbee_esp32 ... Remove warning/errors when compiling Zigbee for ESP32	2020-04-17 17:59:27 +02:00
Stephan Hadinger	a98b719f82	Remove warning/errors when compiling Zigbee for ESP32	2020-04-17 17:52:44 +02:00
Stephan Hadinger	bd38f72ce7	Fix Zigbee DimmerUp/DimmerDown malformed	2020-04-17 17:14:06 +02:00
Theo Arends	09599bb4a1	Provide ESP32 base module support	2020-04-17 16:17:01 +02:00
Theo Arends	39440e56c2	Prep ESP32 template	2020-04-17 14:40:09 +02:00
arijav	2f2f3bf33d	Merge branch 'development' into development	2020-04-17 14:25:09 +02:00
Javier Arigita	79657014b8	no message	2020-04-17 13:50:39 +02:00
Javier Arigita	5c19a01cec	Merge commit '431ad4256545abd953589c1455a90164dcde5b8a' into Heating	2020-04-17 13:46:18 +02:00
Theo Arends	a82b87aaea	Fix compile warning	2020-04-17 13:45:10 +02:00
Theo Arends	1e1a2c1807	Add config version tag ... - Add config version tag - Bump version 8.2.0.4	2020-04-17 13:45:10 +02:00
Stephan Hadinger	318cfe2681	Disarm timer for Occupancy:0	2020-04-17 12:27:36 +02:00
Theo Arends	e5a78deaa3	Fix compile warning	2020-04-17 12:08:43 +02:00
Theo Arends	d3b2f8c489	Add config version tag ... - Add config version tag - Bump version 8.2.0.4	2020-04-17 11:57:09 +02:00
Javier Arigita	ee47415579	Was not propertly committed	2020-04-17 10:35:26 +02:00
Javier Arigita	31d0268df4	Heating controller added. Created by myself initially in LUA running as a Domoticz (running on a raspberry pi) script and controlling Qubino relays for floor heating. Ported to tasmota to get the logic within the relay itself and be less dependent on Domoticz. ... The controller supports several working modes. From off (no action) to manual (following input), automatic (hybrid, rampup or pi controller) and timeplan (automatic following predefined schedule with 3 temperatures for each weekday). It is fully configured via commands, it will include in the future diagnostics and will be extended to more outputs (will be tested on sonoff 4CH Pro). The controller has been tested successfully with a Shelly 1PM device and works as the original LUA domoticz script.	2020-04-17 10:31:53 +02:00
Stephan Hadinger	4551c5f91a	Adding type for Aqara_FF05	2020-04-17 09:22:47 +02:00
Stephan Hadinger	e43f0e36a2	Removed unsupported types	2020-04-17 09:16:08 +02:00
Stephan Hadinger	5507ad889a	Added types for AqaraVibration sensor	2020-04-17 09:11:27 +02:00
Stephan Hadinger	618ac9ab14	Added Zigbee attribute types	2020-04-16 19:36:14 +02:00
Theo Arends	367658b75b	More ESP32 compatibility	2020-04-16 18:33:26 +02:00
Theo Arends	538dfbef2e	More ESP32 compatibility	2020-04-16 16:29:33 +02:00
Theo Arends	d2b7b4012f	More ESP32 compatibility ... More ESP32 compatibility (breaks current ESP32 configuration again!)	2020-04-16 14:59:01 +02:00
Theo Arends	5c43f4c4c2	Fix ESP32 compile error ... Fix ESP32 compile error (#8195)	2020-04-16 11:00:56 +02:00
Theo Arends	ef3cb10dc7	Merge pull request #8195 from s-hadinger/dimmerrange_ct ... Don't apply DimmerRange to CT PWM	2020-04-15 19:45:51 +02:00
Stephan Hadinger	ba20008cd9	Don't apply DimmerRange to CT PWM	2020-04-15 19:42:50 +02:00
Stephan Hadinger	49ef6598fc	Update size of Ping	2020-04-15 18:55:04 +02:00
Stephan Hadinger	71717c3f4e	Improved and simplified Ping	2020-04-15 18:54:20 +02:00
Theo Arends	54149497b9	Merge pull request #8185 from gemu2015/scripter-update ... Scripter update	2020-04-15 17:42:03 +02:00
Theo Arends	908b1113b9	Merge pull request #8191 from pcdiem/device-groups-7 ... Add DevGroupStatus command, Include member add/remove logging	2020-04-15 17:41:06 +02:00
Theo Arends	3a4cf26aba	Enable single PIN mode for SR04 sensor ... Enable single PIN mode for SR04 sensor (#8189)	2020-04-15 16:22:20 +02:00
Paul C Diem	a4b3e61ed0	Merge branch 'development' of https://github.com/pcdiem/Tasmota into device-groups-7	2020-04-15 08:42:32 -05:00
Paul C Diem	b7454d7bd8	Add DevGroupStatus command, Include member add/remove logging	2020-04-15 08:40:18 -05:00
Theo Arends	97abf68612	Fix HTTP authorization response code ... Fix HTTP authorization response code (#8170)	2020-04-15 10:14:16 +02:00
Theo Arends	57f836cc9e	Remove possible Webserver naming ambuigity	2020-04-15 09:58:38 +02:00
VanillaFord	487f4a9191	if GPIO_SR04_TRIG is not configured use single PIN mode with GPIO_SR04_ECHO only ... enable single PIN mode for SR04 sensor. If pin GPIO_SR04_TRIG is not configured, use sensor interface in single PIN mode with GPIO_SR04_ECHO only See as depicted in newping library, see: https://bitbucket.org/teckel12/arduino-new-ping/wiki/Home#!single-pin-sketch	2020-04-15 09:36:23 +02:00
gemu2015	7d85ccb793	Update xdrv_10_scripter.ino	2020-04-15 08:21:43 +02:00
gemu2015	5f6c106507	scripter esp32 script size expansion	2020-04-15 08:11:54 +02:00
Federico Leoni	ad18dc76e1	Update support_button_v2.ino	2020-04-14 20:24:34 -03:00
Federico Leoni	639968c0ab	Fix Set)ption13 on Buttons V2	2020-04-14 18:14:16 -03:00
Theo Arends	93478a058f	Merge branch 'development' into pre-release	2020-04-14 18:53:06 +02:00
Theo Arends	e3503ab5b8	Enable I2C in ESP32 and remove MQTT checks	2020-04-14 17:36:36 +02:00
Theo Arends	e46fddf3b7	More ESP compatibility	2020-04-14 17:21:39 +02:00
Theo Arends	fe63ddbd20	Fix prep for Buttons V2 ... Fix prep for Buttons V2 for ESP32 (#8177)	2020-04-14 17:18:34 +02:00
Theo Arends	eb025461a1	Update settings.ino	2020-04-14 16:58:11 +02:00
Federico Leoni	0f1cd33323	Update settings.h	2020-04-14 11:51:00 -03:00
Federico Leoni	7a12a6f0b2	Add files via upload	2020-04-14 10:47:50 -03:00
Federico Leoni	03c9d75f18	Update tasmota.h	2020-04-14 10:47:01 -03:00
Federico Leoni	8cf4a2ca50	Update settings.h	2020-04-14 10:46:22 -03:00
Federico Leoni	dd44163f3b	Update settings.ino	2020-04-14 10:45:23 -03:00
Theo Arends	a52d4c5208	Revert "Merge pull request #8174 from gemu2015/scripter_update" ... This reverts commit e66b961a54, reversing changes made to 07ce431538.	2020-04-14 14:58:17 +02:00
Stephan Hadinger	4cf82bf0ea	Fix compilation error	2020-04-14 12:56:08 +02:00
Theo Arends	1c91a3a4f7	Merge branch 'development' into pre-release	2020-04-14 12:39:19 +02:00
gemu2015	f3b1497875	update scripter script size on esp32	2020-04-14 12:11:15 +02:00
Theo Arends	ba01cb2046	Fix GlobalTemp and GlobalHum ... Fix GlobalTemp and GlobalHum (#8156)	2020-04-14 11:58:24 +02:00
Mickael Gaillard	35782c41aa	Add APDS-9960 chip A8 sensor support ... Signed-off-by: Mickael Gaillard <mick.gaillard@gmail.com>	2020-04-14 11:02:36 +02:00
Theo Arends	b49f810d71	Merge pull request #8164 from barbudor/utctime_pr ... Added %utctime% as rules variable	2020-04-14 09:38:10 +02:00
Paul C Diem	f7d5e2d018	Fix Color<1,2> <index> with palette	2020-04-13 17:55:12 -05:00
Barbudor	2224e56e1b	Added %utctime% as rules variable ... Was in the docs but not implemented	2020-04-13 23:05:12 +02:00
Stephan Hadinger	cb0f6dd3eb	Add ``DimmerRange`` for PWM lights (#8120)	2020-04-13 21:00:52 +02:00
Theo Arends	e8f3d1d986	Increase ESP32 compatibility ... Increase ESP32 compatibility (breaks current ESP32 configuration again!)	2020-04-13 17:45:06 +02:00
Stephan Hadinger	11117ccc50	Fix Scheme 2-4 brightness when SetOption68 1 (#8058)	2020-04-13 16:49:09 +02:00
Stephan Hadinger	2bfc70f565	Fix Scheme 2-4 brightness when SetOption68 1 (#8058)	2020-04-13 16:47:27 +02:00
Theo Arends	e23a2e7815	Merge pull request #8154 from Staars/development ... adapt GPS-stuff for ESP32	2020-04-13 16:25:51 +02:00
Staars	5588d1dda0	adapt GPS-stuff for ESP32	2020-04-13 16:20:49 +02:00
Theo Arends	5db2ac1955	Add commands ``GlobalTemp`` and ``GlobalHum`` ... Add commands ``GlobalTemp`` and ``GlobalHum`` to init sensor data (#8152)	2020-04-13 14:40:29 +02:00
Theo Arends	125d773763	Merge pull request #8152 from device111/development ... Add change global hum and temp with command	2020-04-13 14:36:39 +02:00
device111	20c9a9cadf	Add change global hum and temp with command	2020-04-13 13:26:49 +02:00
Theo Arends	16ca5cb103	Increase ESP32 compatibility	2020-04-13 13:01:54 +02:00
Theo Arends	f345cc78b2	Fix compile error	2020-04-13 12:32:53 +02:00
Theo Arends	5337d84063	Add SetOption41 to my_user_config.h	2020-04-13 12:27:53 +02:00
Theo Arends	baf3b9b662	Add command ``Palette`` ... Add command ``Palette`` to add the ability to specify a palette of colors (#8150)	2020-04-13 12:19:16 +02:00
Theo Arends	6030501673	Merge pull request #8148 from gemu2015/sendmail_esp32 ... sendmail ESP32	2020-04-13 12:07:25 +02:00
Stephan Hadinger	073f0267f0	Avoid logging AWS IoT shadow when no MQTT connection	2020-04-13 11:40:07 +02:00
Paul C Diem	b4f7500a31	Add light palette support	2020-04-12 23:17:25 -05:00
gemu2015	a5d3974c56	sendmail ESP32	2020-04-12 19:28:19 +02:00
Theo Arends	ad1054a6ae	Increase ESP32 compatibility ... Increase ESP32 compatibility (breaks current ESP32 configuration!)	2020-04-12 18:17:35 +02:00
Stephan Hadinger	3e517ce9b7	- Fix prevent multiple pings to run concurrently	2020-04-12 15:01:45 +02:00
Theo Arends	1972f85616	Merge branch 'development' into pre-release	2020-04-12 14:54:28 +02:00
Theo Arends	42d82fdc97	Fix PMS5003 input range	2020-04-12 14:54:06 +02:00
gemu2015	b796607264	update for esp32	2020-04-12 13:22:23 +02:00
Theo Arends	e0774ab9bb	Merge pull request #8144 from Staars/development ... update xsns_62_MI_HM10.ino	2020-04-12 12:36:40 +02:00
Theo Arends	0c24651ed0	Add interval to PMS5003 sensor ... Add interval to PMS5003 sensor to extend lifetime (#8128)	2020-04-12 12:35:58 +02:00
Staars	bd8213cfd4	update xsns_62_MI_HM10.ino	2020-04-12 12:14:30 +02:00
Theo Arends	0d2287dc94	Merge pull request #8128 from gururise/development ... Add Interval to PMS5003 sensor to extend lifetime.	2020-04-12 12:05:08 +02:00
Theo Arends	7651b447fb	Fix SI1145 compile warning ... Fix SI1145 compile warning (#8141)	2020-04-12 11:26:33 +02:00
to-scho	7feb463ffe	Added 'toggle' to valid ShutterPosition arguments like up, down, open, close ... doc already updated	2020-04-12 10:36:24 +02:00
gururise	86455df73b	move PMS5003_TX to end of kSensorNames[] array to avoid breaking gpio numbering	2020-04-11 12:02:09 -07:00
gururise	54f7cf475d	create new setting pms_wake_interval for PMS sensor interval time	2020-04-11 10:37:12 -07:00
Stephan Hadinger	a3abdbfef2	Ensure zb_channel is in 11..26 range	2020-04-11 19:01:39 +02:00
gururise	57b28112b0	move new GPIO TX to end of enum to avoid breaking gpio numbering	2020-04-11 09:55:15 -07:00
Stephan Hadinger	9addde235a	Add Zigbee command ``ZbConfig`` and configuration in Settings	2020-04-11 18:50:46 +02:00
Gene Ruebsamen	3360970d37	Merge pull request #1 from arendst/development ... merge latest changes from development	2020-04-11 09:44:17 -07:00
Theo Arends	ca6553cbfc	Merge pull request #8137 from blakadder/fix-apds ... remove deprecated function	2020-04-11 18:41:08 +02:00
blakadder	55f4c53e9b	remove deprecated function	2020-04-11 18:31:06 +02:00
Theo Arends	b5512b6d13	Merge branch 'development' into pre-release	2020-04-11 14:51:32 +02:00
Theo Arends	45e9408b73	Add support for AS3935 Lightning Sensor ... Add support for AS3935 Lightning Sensor by device111 (#8130)	2020-04-11 14:51:08 +02:00
Theo Arends	9aa0f27e6c	Merge pull request #8135 from s-hadinger/zigbee_settings_reserve ... Reserve 28 bytes in Settings for Zigbee configuration	2020-04-11 10:44:18 +02:00
Stephan Hadinger	ed4cc8c226	Save 28 bytes in Settings for Zigbee configuration	2020-04-11 10:35:31 +02:00
Theo Arends	2e3836134e	Merge pull request #8133 from ascillato/patch-1 ... Fix ESP32 Compilation	2020-04-11 10:29:29 +02:00
Theo Arends	2a74196e6a	Merge pull request #8130 from device111/development ... support for AS3935, initial commit	2020-04-11 10:27:53 +02:00
Theo Arends	c2b1679198	Merge pull request #8127 from to-scho/feature/shutter_stopaction_commands ... New shutter commands ShutterToggle, ShutterStopOpen, ShutterStopClose…	2020-04-11 10:00:58 +02:00
Adrian Scillato	e76ec8b18a	Fix ESP32 Compilation	2020-04-11 04:54:13 -03:00
device111	cd8436a2ae	Update my_user_config.h	2020-04-11 09:48:55 +02:00
Theo Arends	849916a5ce	Merge pull request #8121 from s-hadinger/light_init ... Limit power after reinit	2020-04-11 08:28:22 +02:00
to-scho	771f53ddcd	New shutter commands ShutterToggle, ShutterStopOpen, ShutterStopClose, ShutterStopToggle, ShutterStopPosition ... ShutterToggle opens shutter when actual shutterposition <=50 and closes otherwise. ShutterStopXxx commands will stop shutter when shutter is currently moving and will be same as ShutterXxx otherwise.	2020-04-11 08:28:05 +02:00
gururise	873d0092e5	settings value changed to uint16 and now in seconds	2020-04-10 23:22:27 -07:00
Adrian Scillato	85e6b522e3	KNX: Fixed Console Log	2020-04-11 03:10:48 -03:00
device111	2f627f98ce	support for AS3935, initial commit	2020-04-11 01:48:37 +02:00
Stephan Hadinger	50217485ec	Limit power after reinit	2020-04-10 22:55:21 +02:00
Stephan Hadinger	c42598f8c3	Add USE_PING	2020-04-10 20:51:15 +02:00
Stephan Hadinger	cc9c3c3922	Add command ``Ping`` (#7176)	2020-04-10 20:40:56 +02:00
Theo Arends	93fd5dd618	Add experimental minimal support for ESP32 ... Add experimental minimal support for ESP32 (#8110)	2020-04-10 18:24:08 +02:00
Theo Arends	13d7943b58	Add support for Seven Segment display ... Add support for Seven Segment display using HT16K33 (#8116)	2020-04-10 16:05:43 +02:00
Theo Arends	d9d554f218	Update my_user_config.h	2020-04-10 15:33:10 +02:00
Theo Arends	8b722e7a4f	Update xdsp_11_sevenseg.ino	2020-04-10 15:31:20 +02:00
Theo Arends	6254c9a35c	Merge branch 'development' into development	2020-04-10 15:28:55 +02:00
Theo Arends	afb8c60093	Add support for an iAQ sensor (#8107) ... Add support for an iAQ sensor (#8107)	2020-04-10 15:13:01 +02:00
Theo Arends	3c7231ec5d	Merge pull request #8107 from Staars/iAQ ... add iAQ-core air quality sensor	2020-04-10 15:04:51 +02:00
Theo Arends	03968925eb	Small optimization in Group Topic	2020-04-10 14:38:00 +02:00
Khoa Ton	90d294fc47	Fixed error in sample usage comment	2020-04-10 01:56:23 -07:00
Theo Arends	a0b0c32ff4	Update references	2020-04-10 10:52:22 +02:00
Theo Arends	aad1aa0dbd	Fix grpflg regression ... Fix grpflg regression (#8114)	2020-04-10 10:38:39 +02:00
Khoa Ton	eb796f8976	New driver for I2C HT16K33 backpack 7 segment LED	2020-04-10 01:06:00 -07:00
Khoa Ton	6da4ec4404	Revert "Better support for LCD 2004A 20x4 #8062" ... This reverts commit f1ed412acb. Revert to remove unwanted commit, bringing back to match upstream HEAD	2020-04-10 00:42:41 -07:00
Theo Arends	d1b1585d1c	Prep for easier preconfigurations	2020-04-09 15:32:23 +02:00
Staars	90be0804eb	add iAQ-core air quality sensor	2020-04-09 14:22:44 +02:00
Theo Arends	d8f750ebb9	Add legacy support	2020-04-09 14:00:02 +02:00
Theo Arends	1b9a2df87e	Prep release 8.3.0	2020-04-09 12:52:51 +02:00
Theo Arends	03e61701e4	Merge branch 'development' into pre-release	2020-04-09 12:49:24 +02:00
Theo Arends	6f51fd4763	Update Changelog and Release Notes	2020-04-09 12:47:47 +02:00
Theo Arends	d080bb97b8	Prep release 8.3.0	2020-04-09 11:58:35 +02:00
Theo Arends	ac7c8c210b	Merge branch 'development' into pre-release	2020-04-09 11:54:21 +02:00
Theo Arends	24fa00ad57	Fix grpflg detection ... Fix grpflg detection (#8095)	2020-04-09 11:51:39 +02:00
Theo Arends	e69f103755	Small change to Settings var names	2020-04-09 11:40:26 +02:00
Stephan Hadinger	eeb7552c54	Change IRremoteESP8266 library updated to v2.7.5	2020-04-09 10:25:50 +02:00
gururise	9516f339d6	PMS5003 use active mode if TX pin not connected	2020-04-08 12:36:44 -07:00
gururise	ad673bec6c	send commands using correct serial object	2020-04-08 11:41:10 -07:00
gururise	51909679d4	Update language files for PMS5003 RX and TX	2020-04-08 10:47:45 -07:00
gururise	2a08a0e9e6	PMS5003 allow config for continuous or interval readings	2020-04-08 10:29:54 -07:00
gururise	b7e7fbdc15	define WARMUP_PERIOD for sensor warmup	2020-04-08 10:27:49 -07:00
gururise	a1f1065be8	Add PMS5003 commands	2020-04-08 10:25:40 -07:00
gururise	ffd5338150	PMS5003 RX TX pin handling in PmsInit	2020-04-08 10:22:32 -07:00
gururise	8d1322984c	Add PMS5003 RX and TX gpio pints to tasmota_template.h	2020-04-08 10:11:37 -07:00
Stephan Hadinger	5b8e19486d	Fix Zigbee crash with Occupancy sensor (#8089)	2020-04-08 15:20:04 +02:00
Theo Arends	83122f7d09	Merge pull request #8093 from pcdiem/devgroupsend ... Add DevGroupSend command	2020-04-08 08:50:17 +02:00
Stephan Hadinger	11746d942e	Fix PWM flickering during wifi connection (#8046)	2020-04-07 22:18:29 +02:00
Paul C Diem	9794f12460	Add DevGroupSend command	2020-04-07 13:25:58 -05:00
Theo Arends	c7aeadcd6b	Merge branch 'development' into pre-release	2020-04-07 17:26:01 +02:00
Theo Arends	8b7aca39f2	Update changelog and release notes	2020-04-07 17:25:37 +02:00
Theo Arends	e964cbca6b	Update tr-TR.h	2020-04-07 16:45:01 +02:00
Theo Arends	53717df2e9	Fix wifi quick connect ... Fix wifi quick connect	2020-04-07 16:39:04 +02:00
Theo Arends	7e162e6caf	Update Wifi connection error message ... Update Wifi connection error message	2020-04-07 16:31:22 +02:00
Theo Arends	253c947d7b	Add more fall back from quick connect ... Add more fall back from quick connect	2020-04-07 16:02:51 +02:00
Stephan Hadinger	6219c0fee2	Moving test inside timer condition	2020-04-07 14:21:17 +02:00
Stephan Hadinger	7a6628d903	Add command ``SetOption41 <x>`` to force sending gratuitous ARP every <x> seconds	2020-04-07 14:07:00 +02:00
Theo Arends	05af60074f	Add quick wifi connect using saved AP parameters ... Add quick wifi connect using saved AP parameters when ``SetOption56 0`` (#3189)	2020-04-07 12:19:54 +02:00
Theo Arends	b532430ff8	Merge branch 'development' into pre-release	2020-04-07 10:45:26 +02:00
Theo Arends	ffa694f80a	Merge pull request #8088 from Staars/GPS_PR ... update xsns_60_GPS.ino	2020-04-07 09:45:07 +02:00
Theo Arends	d735a56e86	Merge pull request #8087 from pcdiem/device-groups-5 ... Add DevGroupName command	2020-04-07 09:43:19 +02:00
Jason2866	37c3de4bdd	Delete eagle.flash.1m.ld_FP_IN_IROM	2020-04-07 09:29:19 +02:00
Jason2866	ae3877b215	Delete eagle.rom.addr.v6.ld	2020-04-07 09:29:10 +02:00
Paul C Diem	2a367512d7	Add DevGroupName command	2020-04-06 12:29:50 -05:00
Staars	cefc278bdf	update xsns_60_GPS.ino	2020-04-06 19:24:11 +02:00
Stephan Hadinger	34fc92d6ca	Add command ``SetOption91 1`` to enable fading at startup / power on	2020-04-06 10:46:17 +02:00
Theo Arends	2d5ee49e9f	Merge pull request #8075 from Staars/NRF24PR ... update xsns_61_MI_NRF24.ino	2020-04-05 21:53:22 +02:00
Staars	432e2d8e75	update xsns_61_MI_NRF24.ino	2020-04-05 16:21:27 +02:00
Theo Arends	4b98e9dfb2	Merge branch 'development' into pre-release	2020-04-05 14:33:47 +02:00
Theo Arends	17c605ac6a	Make checkbox and radiobox label clickable ... Make checkbox and radio label clickable (#8066)	2020-04-05 14:11:49 +02:00
Theo Arends	b33fa68c01	Fix BH1750 MT lux calculation ... Fix BH1750 MT lux calculation (#8057)	2020-04-05 11:52:02 +02:00
Theo Arends	14030df1f4	Merge pull request #8067 from pcdiem/device-groups-4 ... Call XdrvCall even for power. Fix devgrp index mask in xdrv_04_light	2020-04-05 08:43:02 +02:00
Theo Arends	ad86f2c3a6	Merge pull request #8060 from pcdiem/dgr-light-scheme-1 ... Handle light schemes shared in device groups	2020-04-05 08:41:35 +02:00
Theo Arends	ceb396fd08	Merge pull request #8056 from pcdiem/pwm-dimmer-4 ... Enable Normal ButtonTopic/Rule Processing	2020-04-05 08:40:16 +02:00
Paul C Diem	cca5b8e35b	Call XdrvCall even for power. Fix devgrp index mask in xdrv_04_light	2020-04-04 10:27:40 -05:00
Khoa Ton	f1ed412acb	Better support for LCD 2004A 20x4 #8062	2020-04-04 02:01:38 -07:00
Paul C Diem	1e1fd7aece	Handle schemes shared in device groups	2020-04-03 18:24:48 -05:00
Paul C Diem	f393e2ade4	Use SetOption32 for hold time, Use SendKey to process ButtonTopic/Rules and ignore handled button presses/holds.	2020-04-03 11:49:01 -05:00
Theo Arends	c066b0c8e2	Fix compile error if no USE_LIGHT	2020-04-03 18:34:02 +02:00
Theo Arends	49febe4a54	Add BH1750 Measurement Time control ... Add command ``Sensor10 31..254`` to control BH1750 measurement time which defaults to 69 (#8016)	2020-04-02 15:17:54 +02:00
Theo Arends	4b09af8a36	Add BH1750 resolution control ... Add command ``Sensor10 0/1/2`` to control BH1750 resolution - 0 = High (default), 1 = High2, 2 = Low (#8016)	2020-04-01 16:46:12 +02:00
Theo Arends	caff54da7c	Fix unquoted non-json data ... Fix unquoted non-json data (#8040)	2020-04-01 14:39:43 +02:00
Theo Arends	ec899817aa	Change some deepsleep wake messages ... - Change remove MQTT Info messages on restart for DeepSleep Wake (#8044) - Add command ``SetOption90 1`` to disable non-json MQTT messages (#8044)	2020-04-01 14:05:30 +02:00
Stephan Hadinger	f46923ba1e	Change remove floating point libs from IRAM	2020-03-31 23:04:17 +02:00
Markus Peter	a515a10c42	Use unicode decimal code for shutter buttons ... Use unicode decimal code for up and down triangles in shutter button labels instead of unicode character	2020-03-31 18:04:32 +02:00
Theo Arends	e319f4ec40	Refactor light	2020-03-31 17:36:23 +02:00
Theo Arends	39d8011c89	Change light scheme 2,3,4 cycle time ... Change light scheme 2,3,4 cycle time speed from 24,48,72,... seconds to 4,6,12,24,36,48,... seconds (#8034)	2020-03-31 17:27:33 +02:00
Theo Arends	7ebb5f3cb9	Add commands ``CounterDebounceLow`` and ``CounterDebounceHigh`` ... Add commands ``CounterDebounceLow`` and ``CounterDebounceHigh`` to control debouncing (#8021)	2020-03-31 16:30:30 +02:00
Theo Arends	bd34db87b1	Merge pull request #8021 from to-scho/feature/counter_debounce_low_high ... Enhanced counter debouncing	2020-03-31 16:12:03 +02:00
Theo Arends	eccd5cdd19	Refactor web command history	2020-03-31 13:01:50 +02:00
Stephan Hadinger	8666765108	Zigbee change boolean attributes to int ... BREAKING CHANGE, "Power" attribute will be reported as `0`/`1` insteas of `false`/`true`	2020-03-30 21:38:48 +02:00
Stephan Hadinger	06774daba6	Add Zigbee commands ``ZbBindState`` and ``manuf``attribute	2020-03-30 19:23:06 +02:00
bovirus	89014a915e	Update Italian language ... Update italian language Revised with feedback of @effeelle Fixed a typo about D_SENSOR_RELAY	2020-03-30 17:33:12 +02:00
Theo Arends	490a7f2d9f	Turn browser autocomplete off whan arrow is pressed ... Turn browser autocomplete off and use command history as soon as an arrow key is pressed allowing mobiles and tablets to keep using browser autocomplete. (#8015)	2020-03-30 17:11:07 +02:00
Theo Arends	4631fb729a	Add compile error message ... Add compile error message when both rules and scripts are selected (#8026)	2020-03-30 12:52:09 +02:00
Theo Arends	d713468c0c	Add support for longer template names ... Add support for longer template names	2020-03-29 17:41:31 +02:00
to-scho	4a2f3d87c5	Enhanced counter debouncing ... New commands CounterDebounceLow and CounterDebounceHigh to allow individual debounce times for low and high pulse widths to discard non valid falling edges. These are checked before legacy CounterDebounce checks distance between to valid falling edges. Useful to have robust counter results when using e.g. an TCRT5000 optical sensor to count electromechanical "Ferraris" electricity meters.	2020-03-29 17:05:52 +02:00
gemu2015	61b97350da	ed300L support	2020-03-29 16:29:22 +02:00
Theo Arends	257dd18796	Add console command history (#7483, #8015) ... Add console command history (#7483, #8015)	2020-03-29 15:35:58 +02:00
Theo Arends	397fea3bb2	Add Console command history ... Add Console command history (#8015)	2020-03-29 15:17:54 +02:00
Theo Arends	e5a44e6326	Refactor template	2020-03-28 18:08:43 +01:00
Theo Arends	dbc9f16ffc	Add support for up to four MQTT GroupTopics ... - Bump version to 8.2.0.2 - Add support for up to four MQTT GroupTopics using the same optional Device Group names (#8014)	2020-03-28 16:48:36 +01:00
Norbert Richter	898fff9dbc	Add multiple GroupTopic<x> (x=1-4) (default disabled) ... grouptopic (1-4) subscription even when USE_DEVICE_GROUPS is not used.	2020-03-28 11:17:16 +01:00
Theo Arends	ebb2d7a64b	Merge pull request #8012 from s-hadinger/oled_64x48 ... Add support for 64x48 SSD1306 OLED (#6740)	2020-03-27 17:00:14 +01:00
Stephan Hadinger	aa0ace3763	Add support for 64x48 SSD1306 OLED (#6740)	2020-03-27 16:38:29 +01:00
Theo Arends	3bf1410563	Fix PCF8574 and MCP230xx address confict ... Fix PCF8574 and MCP230xx address confict (#8010)	2020-03-27 16:34:00 +01:00
Stephan Hadinger	6c1f5576d0	Add Zigbee ZbUnbind command	2020-03-26 20:58:59 +01:00
Stephan Hadinger	d4a9ed41c9	Add support for unreachable (unplugged) Zigbee devices in Philips Hue emulation and Alexa	2020-03-26 19:34:59 +01:00
Stephan Hadinger	bec81f5089	Zigbee fix incorrect Hue value	2020-03-25 20:36:57 +01:00
Theo Arends	aede481b61	Move not used GPIO init up in chain	2020-03-25 11:29:46 +01:00
Theo Arends	9888a77a15	Merge pull request #7988 from Staars/hm10_PR ... Update HM10	2020-03-24 13:48:14 +01:00
Stephan Hadinger	ac4d4ac571	Code optimization, cleaning and more error codes	2020-03-23 22:46:26 +01:00
Staars	4a89c56182	refactoring, more compact UI	2020-03-23 17:42:29 +01:00
Theo Arends	0a573bd0d6	Update changelog and releasenotes	2020-03-23 15:19:08 +01:00
Stephan Hadinger	f9d6ab1825	Better test for bulbtype	2020-03-23 08:25:01 +01:00
Staars	8ea179aed5	catch hm10page 0, hm10period 1 now triggers one read cycle	2020-03-22 22:00:45 +01:00
Staars	12ec99ed07	web pagination, MJ_HT_V1 polling, some tweaks	2020-03-22 21:35:44 +01:00
Stephan Hadinger	4749222d95	Fix Zigbee sending wrong Sat value with Hue emulation	2020-03-22 19:14:11 +01:00
Theo Arends	5471de6f1c	Change GPIO initialization solving possible Relay toggle on (OTA) restart ... Change GPIO initialization solving possible Relay toggle on (OTA) restart	2020-03-22 17:42:32 +01:00
Theo Arends	dc531110bd	Merge pull request #7979 from s-hadinger/zigbee_restore ... Add command ``ZbRestore`` to restore device configuration dumped with ``ZbStatus 2``	2020-03-22 17:24:27 +01:00
Theo Arends	752fad8b19	Disable reset pins from core ... Disable reset pins from core. Works with core below 2.5.0 and 2.6.3 + e64cb619f (or current STAGE). Should stop relay toggling at restart.	2020-03-22 16:18:48 +01:00
Stephan Hadinger	2c8dd288e7	Add command ``ZbRestore`` to restore device configuration dumped with ``ZbStatus 2``	2020-03-22 16:11:01 +01:00
Theo Arends	b6fc31ebb0	Bump version 8.2.0.1 ... - Bump version 8.2.0.1 - Change HM-10 sensor type detection and add features (#7962)	2020-03-21 15:46:28 +01:00
Theo Arends	140a6d36dc	Merge pull request #7962 from Staars/hm10_PR ... update xsns_62_MI_HM10.ino	2020-03-21 15:33:05 +01:00
Theo Arends	211520b1c8	Bump version 8.2.0	2020-03-21 11:22:22 +01:00
Staars	5f759b03c2	update xsns_62_MI_HM10.ino	2020-03-21 10:17:21 +01:00
Theo Arends	1e1f3f4516	Merge branch 'development' into release	2020-03-20 14:41:52 +01:00
Theo Arends	1b703bcf49	Tune tasmota-sensors for size	2020-03-20 14:41:24 +01:00
Theo Arends	7b6be62da2	Merge branch 'development' into release	2020-03-20 11:22:05 +01:00
Stephan Hadinger	b438a9e1e4	Fix potential crash. ... getZigbeeStatusMessage() does not return null anymore but empty string if the code is not found.	2020-03-20 10:33:40 +01:00
Theo Arends	eb24fc914e	Merge branch 'development' into release	2020-03-19 15:59:53 +01:00
Theo Arends	ca07ab5417	Prep for release	2020-03-19 15:58:37 +01:00
Theo Arends	9851c1d30b	Merge branch 'development' into release	2020-03-19 15:34:06 +01:00
Stephan Hadinger	05ea7cd0c6	Fix probing ModelId and ManudID	2020-03-19 09:43:04 +01:00
Theo Arends	efc444f729	Merge branch 'development' into release	2020-03-18 16:17:31 +01:00
Federico Leoni	d646bcdc7a	Update xdrv_12_home_assistant.ino	2020-03-18 11:02:20 -03:00
Theo Arends	18729bcc41	Add support for ElectriQ iQ-wifiMOODL ... Add support for ElectriQ iQ-wifiMOODL RGBW light by ianbyte (#7947)	2020-03-18 12:32:13 +01:00
Theo Arends	c1d7da258e	Merge pull request #7947 from ianbyte/development ... Add support for the ElectriQ iQ-wifiMOODL RGBW LED controller	2020-03-18 12:13:39 +01:00
Ian King	7049c33b40	Disable ELECTRIQ_MOODL by default as it's a niche product	2020-03-18 10:58:19 +00:00
Ian King	a9372fae06	Fix typo in GPIO define name	2020-03-18 10:30:52 +00:00
Theo Arends	dd286e5eb2	Merge branch 'development' into release	2020-03-18 11:30:07 +01:00
Ian King	b250c59931	Keep sensor name short	2020-03-18 10:24:56 +00:00
Theo Arends	5a98fd44e2	Fix HumOffset on some sensors ... Fix HumOffset on some sensors	2020-03-18 11:23:00 +01:00
Stephan Hadinger	43ea0b6356	Fix crash	2020-03-17 23:00:40 +01:00
Ian King	0609858b39	Fix typo	2020-03-17 21:45:42 +00:00
Ian King	740e91dd27	Fix typos	2020-03-17 21:35:44 +00:00
Ian King	4317f048aa	Fix comment alignment	2020-03-17 21:28:40 +00:00
Ian King	d7fc444281	Correct copyright date to 2020	2020-03-17 18:34:25 +00:00
Ian King	e749df75ad	Add support for ElectriQ iQ-wifiMOODL RGBW LED contoller	2020-03-17 18:27:17 +00:00
Stephan Hadinger	03ef61c426	Change Zigbee simplification of devices probing, saving Flash and memory	2020-03-17 18:46:05 +01:00
Theo Arends	a3cc81bb8a	Merge branch 'development' into release	2020-03-17 16:52:28 +01:00
Theo Arends	0a0afe3615	Add Dew point to more sensors ... Add Dew point to more sensors and refactor JSON Temperature and Humidity message	2020-03-17 16:29:59 +01:00
Theo Arends	b00baaec53	Update release info	2020-03-17 11:22:55 +01:00
Theo Arends	026b932554	Add Dew Point to BME sensors ... Add Dew Point to BME sensors	2020-03-17 11:10:39 +01:00
Theo Arends	dad82fc472	Merge pull request #7934 from effelle/development ... New command: Humidity Offset	2020-03-17 08:47:57 +01:00
Theo Arends	f060954f54	Merge pull request #7935 from s-hadinger/pmem_2 ... Moving more strings to PROGMEM	2020-03-17 08:44:39 +01:00
Theo Arends	a6de551acc	Merge pull request #7936 from catalintabirca/patch-3 ... Update ro-RO.h	2020-03-17 08:38:11 +01:00
Theo Arends	b5e5e367a9	Merge pull request #7937 from pcdiem/device-groups-3 ... Check GroupTopic index, Fix response to include other groups	2020-03-17 08:37:07 +01:00
Norbert Richter	b03e328d2d	Fix TX20 wind sensor start frame check	2020-03-17 08:25:55 +01:00
Paul C Diem	6b632ef280	Only exec power cmd for local dev group	2020-03-16 22:03:31 -05:00
Paul C Diem	9b0fc0985b	Merge branch 'development' of https://github.com/arendst/Tasmota into device-groups-3	2020-03-16 17:08:11 -05:00
Paul C Diem	52b3739614	Check GroupTopic index, Fix response to include other groups	2020-03-16 17:06:41 -05:00
catalintabirca	d5e918a462	Update ro-RO.h ... correction of some diacritics and a few words	2020-03-16 20:37:13 +02:00
Stephan Hadinger	9df5294f12	Moving more strings to PROGMEM	2020-03-16 18:55:58 +01:00
Federico Leoni	5ba26780e9	Humidity Offset	2020-03-16 14:29:55 -03:00
device111	245dd244e9	Update DEW Point	2020-03-16 18:08:16 +01:00
Theo Arends	a258296055	Add Dew Point to Temperature and Humidity sensors ... Add Dew Point to Temperature and Humidity sensors	2020-03-16 17:09:15 +01:00
Theo Arends	566bc47af4	Add Dewpoint to Temp/Hum sensors Prt. 1 ... - Add Dewpoint to Temp/Hum sensors Prt. 1 - Update AHT10 driver (#7930)	2020-03-16 16:52:22 +01:00
Theo Arends	564afd93ad	Merge pull request #7923 from tiagofreire-pt/development ... Correcting translations and energy unit for them dimensional denominations	2020-03-16 14:03:49 +01:00
Paul C Diem	fec34434a6	Merge branch 'development' of https://github.com/arendst/Tasmota into pwm-dimmer3	2020-03-15 18:26:46 -05:00
Paul C Diem	32448bd75e	Reverse down/up tap order, Save settings only if local	2020-03-15 13:56:26 -05:00
Theo Arends	15ed3f1da3	Merge branch 'development' into release	2020-03-15 15:42:03 +01:00
Theo Arends	6cc4f224cf	Fix compile error when hue emulation disabled	2020-03-15 14:53:05 +01:00
Stephan Hadinger	86eeacbf4e	Zigbee move all strings to PMEM	2020-03-15 14:27:15 +01:00
tiagofreire-pt	6080cde23e	Update es-ES.h	2020-03-15 12:10:24 +00:00
tiagofreire-pt	25dc3aa732	Correting dimensions from KWh to kWh	2020-03-15 12:05:47 +00:00
tiagofreire-pt	60c42433c6	Update pt-PT.h	2020-03-15 12:04:07 +00:00
tiagofreire-pt	7fcfbdb61c	Update zh-TW.h	2020-03-15 12:02:27 +00:00
tiagofreire-pt	30f59e3a8f	Update zh-CN.h	2020-03-15 12:02:14 +00:00
tiagofreire-pt	0ce12f3fa2	Update uk-UA.h	2020-03-15 12:01:57 +00:00
tiagofreire-pt	8c124a32bd	Update tr-TR.h	2020-03-15 12:01:27 +00:00
tiagofreire-pt	a4cf1e89ed	Update sv-SE.h	2020-03-15 12:01:06 +00:00
tiagofreire-pt	ac54afa69a	Update sk-SK.h	2020-03-15 12:00:48 +00:00
tiagofreire-pt	60ea3e342f	Update ru-RU.h	2020-03-15 12:00:31 +00:00
tiagofreire-pt	600d4921c5	Update ro-RO.h	2020-03-15 12:00:16 +00:00
tiagofreire-pt	52df47dd44	Update pt-BR.h	2020-03-15 12:00:04 +00:00
tiagofreire-pt	7b3b0bf0ac	Update pl-PL.h	2020-03-15 11:59:53 +00:00
tiagofreire-pt	a68339e720	Update nl-NL.h	2020-03-15 11:59:41 +00:00
tiagofreire-pt	84292ff3d2	Update ko-KO.h	2020-03-15 11:59:24 +00:00
tiagofreire-pt	a01ee95af1	Update it-IT.h	2020-03-15 11:59:03 +00:00
tiagofreire-pt	cdfac65671	Update hu-HU.h	2020-03-15 11:58:50 +00:00
tiagofreire-pt	8d52ff44e6	Update he-HE.h	2020-03-15 11:58:37 +00:00
tiagofreire-pt	55f62c3abb	Update fr-FR.h	2020-03-15 11:58:21 +00:00
tiagofreire-pt	b7e19652ba	Update el-GR.h	2020-03-15 11:58:08 +00:00
tiagofreire-pt	b6b40532a6	Update cs-CZ.h	2020-03-15 11:57:24 +00:00
tiagofreire-pt	03c1ff8211	Update bg-BG.h	2020-03-15 11:57:04 +00:00
Theo Arends	ea4cd8005f	Merge branch 'development' into release	2020-03-15 11:50:00 +01:00
Theo Arends	79d39af9d3	Keep switchmode in sync	2020-03-15 11:41:24 +01:00
Theo Arends	dbf82cf12a	Keep language files in sync	2020-03-15 11:29:32 +01:00
Theo Arends	9a14c9a83f	Merge pull request #7921 from effelle/development ... Update xdrv_12_home_assistant.ino	2020-03-15 09:23:15 +01:00
Paul C Diem	322952a54f	Move PWM Dimmer init logic to pre init, Use dimmer_hw_min for PWM, Remote mode fixes	2020-03-14 18:53:09 -05:00
Adrian Scillato	adbb37205b	Update Spanish Translation	2020-03-14 18:40:07 -03:00
Federico Leoni	d0ff0ccba6	Update xdrv_12_home_assistant.ino	2020-03-14 18:36:19 -03:00
Adrian Scillato	ca042bc3d9	Fixed duplicated entries on en-GB.h	2020-03-14 18:28:03 -03:00
tiagofreire-pt	3c610f872d	Update de-DE.h	2020-03-14 19:34:35 +00:00
tiagofreire-pt	cad4fb879b	Update zh-TW.h	2020-03-14 18:33:30 +00:00
tiagofreire-pt	89ed5d3a4e	Update zh-CN.h	2020-03-14 18:33:17 +00:00
tiagofreire-pt	d774608196	Update uk-UA.h	2020-03-14 18:33:07 +00:00
tiagofreire-pt	d4f1fb53d9	Update tr-TR.h	2020-03-14 18:32:57 +00:00
tiagofreire-pt	fafeea8da9	Update sv-SE.h	2020-03-14 18:32:46 +00:00
tiagofreire-pt	34e7c94879	Update sk-SK.h	2020-03-14 18:32:34 +00:00
tiagofreire-pt	75e6f07bc6	Update ru-RU.h	2020-03-14 18:32:27 +00:00
tiagofreire-pt	3645dda825	Update ro-RO.h	2020-03-14 18:32:20 +00:00
tiagofreire-pt	aa857dc303	Update pt-BR.h	2020-03-14 18:32:12 +00:00
tiagofreire-pt	08875ad6e5	Update pl-PL.h	2020-03-14 18:32:03 +00:00
tiagofreire-pt	b96107cfb1	Update nl-NL.h	2020-03-14 18:31:54 +00:00
tiagofreire-pt	5a3b2b1c0c	Update ko-KO.h	2020-03-14 18:31:46 +00:00
tiagofreire-pt	a356306595	Update it-IT.h	2020-03-14 18:31:34 +00:00
tiagofreire-pt	2e96fbd80d	Update hu-HU.h	2020-03-14 18:31:20 +00:00
tiagofreire-pt	accb8b762e	Update he-HE.h	2020-03-14 18:30:57 +00:00
tiagofreire-pt	a810405c12	Update fr-FR.h	2020-03-14 18:30:30 +00:00
tiagofreire-pt	7bcda8c2e5	Update es-ES.h	2020-03-14 18:30:21 +00:00
tiagofreire-pt	aae88af762	Update en-GB.h	2020-03-14 18:30:11 +00:00
tiagofreire-pt	292e470c61	Update el-GR.h	2020-03-14 18:30:00 +00:00
tiagofreire-pt	e92bdeee8d	Update de-DE.h	2020-03-14 18:29:48 +00:00
tiagofreire-pt	915349edf6	Update cs-CZ.h	2020-03-14 18:29:28 +00:00
tiagofreire-pt	6944c43838	Update bg-BG.h	2020-03-14 18:29:07 +00:00
tiagofreire-pt	e30b4d18f5	Remote fixed and unproper definitions of de-DE on xsns_53_sml.ino	2020-03-14 17:31:52 +00:00
tiagofreire-pt	dacb9b0913	Update pt-PT.h	2020-03-14 17:27:26 +00:00
tiagofreire-pt	c22215e953	Support for translations on "xsns_53_sml.ino"	2020-03-14 17:21:54 +00:00
Theo Arends	d9b2d03017	Merge branch 'development' into release	2020-03-14 17:58:06 +01:00
Theo Arends	528074090b	Fix intermittent watchdog on Options save	2020-03-14 17:46:22 +01:00
Theo Arends	1a825db2b9	Fix ghost logging	2020-03-14 17:45:36 +01:00
Theo Arends	635d769286	Merge branch 'development' into release	2020-03-14 15:44:20 +01:00
Theo Arends	4a8f73aea3	Update changelog and release notes	2020-03-14 15:32:44 +01:00
Theo Arends	18fac98f5b	Merge branch 'development' into release	2020-03-14 15:24:47 +01:00
Theo Arends	5d944829cd	Update changelog and release notes	2020-03-14 15:24:22 +01:00
Theo Arends	100acc5664	Fix switch status	2020-03-14 14:54:11 +01:00
Stephan Hadinger	13dde44eb7	Add Zigbee support for Hue emulation	2020-03-14 14:17:30 +01:00
Paul C Diem	3f9c4f1909	Merge branch 'development' of https://github.com/arendst/Tasmota into pwm-dimmer3	2020-03-14 07:18:34 -05:00
Theo Arends	d043ac770d	Refactor support_switche.ino ... - Add commands ``SwitchMode 13`` PushOn and ``SwitchMode 14`` PushOnInverted (#7912) - Refactor support_switche.ino	2020-03-14 13:13:33 +01:00
Theo Arends	a664278c78	Merge pull request #7912 from BASM/switchpushon ... switch: New mode PUSHON (13)	2020-03-14 12:52:17 +01:00
Theo Arends	5235ad1757	Add support for HDC1080 ... Add support for HDC1080 Temperature and Humidity sensor by Luis Teixeira (#7888)	2020-03-14 12:43:02 +01:00
Leonid Muravjev	0f157caa05	switch: New mode PUSHON (13) ... Just turn it on, if the switch is on. Switch off by PulseTime. For a simple implementation processing of PIR sensors.	2020-03-14 14:31:05 +03:00
Theo Arends	af1e2f73a5	Merge pull request #7888 from teixeluis/development ... Adding driver for the Texas Instruments HDC1080	2020-03-14 09:53:58 +01:00
Luis Teixeira	2441acdc02	Fixed the sensor read errors that were due to misplaced timer variable initializations.	2020-03-13 22:40:33 +00:00
Luis Teixeira	99a00613b8	Merge branch 'development' of https://github.com/arendst/Tasmota into development	2020-03-13 22:38:26 +00:00
Paul C Diem	50d63f8678	Only set power for devices included in updates	2020-03-13 16:53:27 -05:00
Paul C Diem	243f17585c	Send DGR BRI_MIN only if USE_PWM_DIMMER defined	2020-03-13 15:15:38 -05:00
Paul C Diem	a72acf37fe	Use Light module to manage PWM, Rework multi-button sequences	2020-03-13 12:08:44 -05:00
Theo Arends	f3f8248655	Merge branch 'development' into release	2020-03-13 14:02:23 +01:00
Theo Arends	d26ce074d8	Fix command FriendlyName when no index is given ... Fix command FriendlyName newname when no index is given	2020-03-13 12:50:27 +01:00
Theo Arends	1be984e5ee	Merge branch 'development' into release	2020-03-13 12:21:44 +01:00
Theo Arends	ce8e68d118	Disable recurring debug message ... Disable recurring debug message	2020-03-13 12:17:19 +01:00
Theo Arends	076ab4ba11	Merge pull request #7899 from pcdiem/device-groups1 ... Add periodic announcement, Raise member timeout to 45s, Fix already a…	2020-03-13 12:02:57 +01:00
Theo Arends	c62a0318cd	Bump version to 8.1.0.11 ... - Bump version to 8.1.0.11 - Add HAss Discovery support for Button and Switch triggers by Federico Leoni (#7901)	2020-03-13 12:00:52 +01:00
Erik	2f5846d81b	Tweaks for HA discovery	2020-03-13 11:14:03 +01:00
Luis Teixeira	b758699e39	Some corrections based on feedback from the project leads contributors. ... Improved runtime impact by replacing the sleep between the I2C operations with separate code triggered by timer events.	2020-03-13 00:46:25 +00:00
Luis Teixeira	b7907aee1a	Merge branch 'development' of https://github.com/arendst/Tasmota into development	2020-03-12 22:58:18 +00:00
Federico Leoni	956f56e0e1	Update xdrv_12_home_assistant.ino	2020-03-12 16:48:44 -03:00
Paul C Diem	3138d880d0	Add periodic announcement, Raise member timeout to 45s, Fix already acked check	2020-03-12 12:51:54 -05:00
Theo Arends	057ff37263	Add function KeyTopicActive(key) ... Add function KeyTopicActive(key)	2020-03-12 12:11:33 +01:00
Theo Arends	f918181127	Merge branch 'development' into release	2020-03-12 11:07:57 +01:00
Theo Arends	b0399a550e	Merge pull request #7893 from malbinola/development ... New command ShutterInvertWebButtons	2020-03-12 10:03:09 +01:00
Luis Teixeira	292698123b	Minor correction to the description. Slightly simplified declaration of the sensor in the support_features.ino.	2020-03-10 23:33:09 +00:00
Luis Teixeira	78a608dd44	Synched with resources from original repo	2020-03-10 23:01:51 +00:00
Luis Teixeira	725b9898c5	Added cast to properly deal with the AddLogMissed function prototype.	2020-03-10 22:53:49 +00:00
Luis Teixeira	4910e033b3	Merge branch 'development' of https://github.com/arendst/Tasmota into development	2020-03-10 22:46:48 +00:00
Theo Arends	0855098b01	Merge branch 'development' into release	2020-03-10 17:11:25 +01:00
Theo Arends	eaf0e352a9	Fix DS18x20 driver (#7879) ... Fix DS18x20 driver (#7879)	2020-03-10 16:54:06 +01:00
Theo Arends	2d6ced9521	Try to fix intermittent watchdog reset ... Try to fix intermittent watchdog reset on GUI emulation change (#7886)	2020-03-10 16:11:34 +01:00
Theo Arends	d5fa09f157	Merge branch 'development' into release	2020-03-10 12:33:41 +01:00
Theo Arends	e04bb5ecff	Fix DS18x20 driver (#7879) ... Fix DS18x20 driver (#7879)	2020-03-10 11:23:45 +01:00
Matteo Albinola	2cab0d0539	New command ShutterInvertWebButtons	2020-03-10 08:41:37 +01:00
Luis Teixeira	e9d201a2c3	Fixed issue during the call to ResponseAppend_P (was passing ... a primitive instead of pointer to the expected string)	2020-03-10 00:26:24 +00:00
Luis Teixeira	2a06a6bc5a	Fixed issue when reading temperature and humidity in the same transaction.	2020-03-10 00:15:42 +00:00
Luis Teixeira	cb2cc9bbb1	More intermediate changes and troubleshooting.	2020-03-09 23:02:03 +00:00
Luis Teixeira	3908865473	Added the hdc1080 device driver.	2020-03-08 20:54:28 +00:00
Hadinger	4cc32407c5	Hue emulation code optimization	2020-03-08 17:41:05 +01:00
Theo Arends	b14c72e1d4	Merge pull request #7874 from device111/development ... Add comment that AHT10 is incompatible with other I2C devices	2020-03-08 15:43:33 +01:00
Theo Arends	c65cc9f156	Merge branch 'development' into release	2020-03-08 15:10:47 +01:00
Theo Arends	2d4a6a29eb	Fix Sonoff D1 driver (#7598) ... Fix Sonoff D1 driver (#7598)	2020-03-08 14:49:57 +01:00
device111	70291a5e77	Add comment that AHT10 is incompatible with other I2C devices ... - confirmed, that the sensor is incompatible with other I2C devices on bus.	2020-03-08 14:42:37 +01:00
Theo Arends	2603459747	Revert switchmode 6 according to issue 7778 ... Revert switchmode 6 according to issue 7778 (#7831)	2020-03-08 13:32:20 +01:00
Theo Arends	bf86700e90	Consolidate DHT sensor driver	2020-03-08 12:28:14 +01:00
Luis Teixeira	3cf6b8bd8a	Merge branch 'development' of https://github.com/arendst/Tasmota into development ... # Conflicts: # tasmota/settings.h # tasmota/settings.ino # tasmota/support.ino # tasmota/support_command.ino # tasmota/tasmota.ino	2020-03-07 20:01:48 +00:00
Alexander Schliebner	2335f2fedd	Bugfix in function 'mp' ... If optional parameter v2 was omitted, evaluation failed.	2020-03-07 18:52:24 +01:00
Alexander Schliebner	7df46f051d	Optimized function 'mp' ... Leaner syntax of function `mp` and simplified implementation. New documentation: Mapping function `mp` It addresses a standard task with less code and much flexibility: mapping an arbitrary incoming numeric value into a defined schema of allowed/reasonable ranges. The numeric value `x` passed as the first parameter is compared to the mprules in the order they are provided as subsequent parameters. If the value matches the criteria, the defined value is returned. Subsequent mprules are skipped. If `x` matches none of the mprules, `x` is returned unchanged. ``` mp(x mprule1 mprule2 ... mprule<n>) ``` An mprule starts with one of the comparison operators `<`, `>` or `=`, followed by a numeric value `v1`, optionally followed by a second numeric value `v2`: ``` <|>|=v1[ v2] ``` Example 1: `<8 0` - this rule reads: If x is less than 8, return 0. Example 2: `>100` - this rule reads: If x is greater than 100, return 100. Example 3: ``` y=mp(x <8 0 >100) ``` Assigns 0 to y if x is less than 8. Assigns 100 to y if x is greater than 100. Assigns x to y for all values of x that do not meet the above criteria (8 to 100). The above code of example 3 does the same as the following code - with just one line of code and 19 characters less: ``` y=x if x<8 { y=0 } if x>100 { y=100 } ``` Every of the above mentioned numeric values `x`, `v1` and `v2` can be a literal, an expression or a variable.	2020-03-07 16:53:49 +01:00
Theo Arends	df43217a18	Merge pull request #7864 from Staars/nrf24 ... MI_NRF24: add GCD1, missing PDU-type, small refactoring	2020-03-07 14:57:43 +01:00