Tasmota

Table of Contents

Buzzer command

»6.6.0.4

Tasmota gives you the option to control the sound pattern of a buzzer.

A device LED can be assigned as a Buzzer component to display a blink pattern.

Buzzer command

Parameters for the Buzzer command can be

<count>,<beep>,<silence>,<tune>
all parameters are optional. (default is 1,1,1 (one 100 millisecond beep)).

<count>
number of beeps

<beep>
duration of one beep in 100 millisecond steps

<silence>
duration of silence between beeps 100 millisecond steps

<tune>
is a 32-bit bitmask where a 1 bit beeps and a 0 bit is silence according to <beep> and <silence>, respectively. The tune is played from most significant bit (MSB) to least significant bit (LSB). Leading and trailing 0 bits are ignored. If <tune> is specified, <count> is ignored. If <tune> is 0, it is ignored.

Examples: 3 - Beep three times with 100 milliseconds duration and 100 milliseconds pause
2,3 - Beep twice with 300 milliseconds duration and 100 milliseconds pause
2,3,4 - Beep twice with 300 milliseconds duration and 400 milliseconds pause
1,2,3,0xF54 (0000 0000 0000 0000 0000 1111 0101 0100). Each 1 bit beeps for 200 milliseconds and each bounded 0 bit pauses for 300 milliseconds

0 = stop active buzzer cycle » v6.6.0.18

Wiki has moved to link on the left.