11 DM_WF_MDV4
beardedfool edited this page 2019-10-09 20:22:04 +01:00

This Device is based on a Tuya Wi-Fi Module. Refer to "MCU Based Tuya Dimmers and Switches" for details.

DM_WF_MDV4 Dimmer and Case

This is a 240V Leading Edge Dimmer with a TYWE3S controller and an STM8 MCU

Flashing:

The NRST pin of the STM8 needs to be grounded upon boot to disable it, this is brought out to a header pin, along with ground and VCC from the TYWE3S. Confirm by checking continuity with a multimeter

IO0 from the TYWE3s also needs to be grounded upon boot, otherwise it's normal tasmota flashing procedure.

Header pins from left to right *VCC *Unknown *Ground *STM8 NRST

Header

TYWE3S

STM8S003F3P6

Config:

As per main TuyaMCU page using

GPIO Component
01 Tuya Rx (108)
03 Tuya Tx (107)

More information:

Bought from ebay

More information on TYWE3S]