7 PlatformIO CLI

blakadder edited this page 2019-11-01 19:05:09 +01:00

Table of Contents

• Prerequisites
• Install Python and PIP
• Install PlatformIO CLI
• Download the Tasmota source code
• Select the environment
• Compile and upload

How to flash the Tasmota firmware onto a device using the platformio command line interface. This manual was tested on Ubuntu 17.10.

Prerequisites

Install Python and PIP

sudo apt-get install python-pip

Install PlatformIO CLI

sudo pip install -U platformio

Download the Tasmota source code

Either download the latest Tasmota Source code from https://github.com/arendst/Tasmota/ and extract it or clone the Git repository:

'git clone https://github.com/arendst/Tasmota.git`

Select the environment

The default environment configuration can be used to easily generate Tasmota firmware variants (sonoff, sensors, display, etc.). If you're not sure which binary is the right one for you, consult the builds table or just start with tasmota.bin. To build and/or flash exactly one of these, use the -e command line argument (e.g., -e tasmota-sensors). Alternatively, uncomment (i.e., remove the leading ;) the desired env_default line in the platformio.ini file and do not use the -e argument on the command.

; *** Uncomment one of the lines below to build/upload only one environment
;default_envs = tasmota
;default_envs = tasmota-ircustom     ; alternative to 'tasmota' with full IR protocols activated, you will need to disable some features to keep code not too big
;default_envs = tasmota-minimal
;default_envs = tasmota-basic
;default_envs = tasmota-knx
;default_envs = tasmota-sensors
;default_envs = tasmota-display
;default_envs = tasmota-ir
;default_envs = tasmota-BG
;default_envs = tasmota-BR
;default_envs = tasmota-CN
;default_envs = tasmota-CZ
;default_envs = tasmota-DE
;default_envs = tasmota-ES
;default_envs = tasmota-FR
;default_envs = tasmota-GR
;default_envs = tasmota-HE
;default_envs = tasmota-HU
;default_envs = tasmota-IT
;default_envs = tasmota-KO
;default_envs = tasmota-NL
;default_envs = tasmota-PL
;default_envs = tasmota-PT
;default_envs = tasmota-RU
;default_envs = tasmota-SE
;default_envs = tasmota-SK
;default_envs = tasmota-TR
;default_envs = tasmota-TW
;default_envs = tasmota-UK 

Compile and upload

Once all the prerequisites are in place, compiling and uploading is one simple command. Execute this from within the Tasmota source code directory:

platformio run -e <variant> --target upload --upload-port <port>

Just make sure to replace <port> with the actual serial port your device is connected to. On Windows these interfaces are named COM ports (COM1, COM2, etc.). On Linux these interfaces are named TTY ports (e.g., /dev/ttyUSB0, /dev/ttyUSB1, etc.)].

Depending on your configuration your user account may need to be in the dialout group.

Wiki has moved to link on the left.