4 Timers

blakadder edited this page 2019-10-27 23:03:04 +01:00

Unescape Escape

Table of Contents

• Commands
• JSON payload anatomy

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

» v5.13.1

To control a device locally 16 timers are programmable. They can be configured with the Timer<x> command followed by a JSON payload with optional parameters. For example:

Timer 1 will ENABLE output of POWER1 at exactly 2:23 every Tue/Wed and Sat

Timer1 {"Arm":1,"Time":"02:23","Window":0,"Days":"--TW--S","Repeat":1,"Output":1,"Action":1}

Timer 4 will TOGGLE output of POWER2 within a 30 minute window centered around 16:23 each Sunday, Monday, Thursday and Friday and will disable (disarm) after executing.

Timer4 {"Arm":1,"Time":"16:23","Window":15,"Days":"SM00TF0","Repeat":0,"Output":2,"Action":2}

When Mode 1 or Mode 2 is used, Latitude and Longitude become available. In that case the Time value is always used as an offset so make sure to set it to 00:00 if no offset is wanted.

Timer1 {"Arm":1,"Mode":2,"Time":"-2:23","Window":0,"Days":"11TW11S","Repeat":1,"Output":1,"Action":1}

Commands

Command	Parameters
Latitude	<value> = set latitude
Longitude	<value> = set longitude
Timers	Timers control 0 = disable all timers  » v6.2.0 1 = enable all timers 2 = toggle all timers
Timer<x>	Parameters for Timer<x> where x = 1..16 0 = clear parameters for Timer<x>  » v6.2.0 1..16 = copy Timer<y> parameters to Timer<x> { "name":value ; .. } = set all or individual parameters using JSON payload with names and values of data pairs from the table below

JSON payload anatomy

JSON Name	JSON Value
Arm	0 = disarm or disable timer 1 = arm or enable timer
Mode	0 = use clock time 1 = Use local sunrise time using Longitude, Latitude and Time offset 2 = use local sunset time using Longitude, Latitude and Time offset
Time	hh:mm = set time in hours 0 .. 23 and minutes 0 .. 59 -hh:mm = set time in offset hours -11 .. 12 and minutes 0 .. 59 (used with Mode 1 and Mode 2)
Window	0..15 = add or subtract a random number of minutes to Time
Days	SMTWTFS = set day of weeks mask where 0 or - = OFF and any different character = ON
Repeat	0 = allow timer only once 1 = repeat timer execution
Output	1..16 = select an output to be used if no rule is enabled
Action	0 = turn output OFF 1 = turn output ON 2 = TOGGLE output 3 = RULE/BLINK If the Tasmota Rules feature has been activated by compiling the code (activated by default in all pre-compiled Tasmota binaries), a rule with Clock#Timer=<timer> will be triggered if written and turned on by the user. If Rules are not compiled, BLINK output using BlinkCount parameters.

Wiki has moved to link on the left.